Mercedes-Benz Sprinter VS30 (2019–Present): The Complete Fitment Guide
Share
The Mercedes-Benz Sprinter VS30 (model series 907) is the third-generation Sprinter, sold in the U.S. from the 2019 model year to today. Most of the body stays the same across those years, so roof and body-opening parts carry over. Two things split the catalog: the rear door hinges, and the 2023 switch to a new engine and all-wheel drive. This guide shows which fields decide fitment, and where each accessory category cares about them.
- Covers Sprinter VS30 (907), 2019 to present
- Not covered NCV3 and T1N (separate guides)
- Sources 31, including owner reports
- Last checked Oct 2026
Quick answer
- Check the rear door hinges before any rear-door product. VS30 vans were ordered with either 180-degree or 270-degree rear doors, and most rear carriers, racks, and ladders are built for the 180-degree hinge.813 A factory 180-degree hinge swap is the usual fix.910
- The 2023 model year is the biggest split. A new four-cylinder diesel arrived with a nine-speed transmission and always-on all-wheel drive, replacing the optional selectable 4x4.4 Skid plates, lift kits, and steps are now listed for 2019 to 2022 or for 2023 and newer.202223
- Roofs follow wheelbase and roof height. Mercedes builds the van on 144-inch and 170-inch wheelbases plus a 170 Extended body, with standard and high roofs.25
- The high roof is rated for 331 lb, rack included. Mercedes' body-builder guideline lists 661 lb for a low roof and 331 lb for a high roof, and a rack's own rating is a different number.1
- Front-end parts have sensors to respect. Radar and parking sensors sit behind the plastic bumper, and a 2025 front-end note shows up in brand fitment lists.32425
- Dually vans need a separate check. Several rear-door and bumper listings exclude the dual-rear-wheel 3500 or ask for extra brackets.122427
What "VS30" means in a listing
"VS30" is the name owners and brands use for the third-generation Sprinter. Mercedes' body-builder guideline calls the van "Sprinter model designation 907," which is why you also see "907" and "W907" on listings.2 It follows the NCV3 and, before that, the T1N. Brands sort accessories into those three buckets, so the first filter on any listing is the generation.
The year ranges you see are a signal, not a guarantee. A listing for "2019+" usually means 2019 through the current model year, while a listing for "2019 to 2024" stops before the latest front end. Read the end of the range as carefully as the start.2425
| Name in a listing | What it means for fitment |
|---|---|
| Sprinter VS30, 907, W907 | This guide. Mercedes' current guideline covers "Sprinter - BM907."2 |
| Sprinter 2019+ | The VS30 from its first U.S. model year to now. Check for an end year or a note about the 2023 or 2025 changes.2224 |
| Sprinter 2007+ | Ambiguous. It may span the NCV3 and the VS30. Look for a hinge or door note, because the two generations differ at the rear doors.11 |
| 4x4 (2019 to 2022), AWD (2023+) | The two drivetrains. Underbody parts and lifts are usually written for one.212223 |
| 2500, 3500, 3500XD, 4500 | Weight classes. They matter for suspension, rear steps, bumpers, and anything near the rear wheels.5 |
| Cargo, crew, passenger, cab chassis | Body styles with different glass and interior fittings. They change window covers, screens, and rear-door products.2 |

Wheelbases, body lengths, and roof heights
Mercedes lists the cargo van in three lengths. The guideline gives the wheelbases as 3,665 mm (144 inches) and 4,325 mm (170 inches), and treats the "170 Extended" as a third version with the same wheelbase and a longer rear overhang.2 The 2025 U.S. brochure gives the overall lengths as 234, 274, and 290 inches for the 144, 170, and 170 Extended.5
| Roof | 144 in | 170 in | 170 in Extended |
|---|---|---|---|
| Standard roof | ✓ | — | — |
| High roof | ✓ | ✓ | ✓ |
Check marks show listed combinations; dashes are not listed. Source: Mercedes-Benz Body and Equipment Guideline, cargo van table. Crew and passenger vans differ; check your build.
- 144 wheelbase234 in
- 170 wheelbase274 in
- 170 Extended290 in
Mercedes-Benz USA 2025 Sprinter brochure, rounded as printed. Scale: longest van = 100%. Source 5.
| Wheelbase and body | Standard roof | High roof |
|---|---|---|
| 144 in | Listed | Listed |
| 170 in | Not listed | Listed |
| 170 in Extended | Not listed | Listed |
The U.S. brochure describes the cargo van with "two roof heights," standard and high.5 The NCV3 also offered a super high roof (see the NCV3 guide), but the current U.S. brochure lists only two heights, so a rack or screen listed for a "super high" roof is probably not a VS30 fitment. Ask the brand.5 Passenger vans are listed as a 12-seat on the 144 and a 15-seat on the 170.2
A standard-roof van needs a different shopping list than a high roof. A ladder is a good example: a ladder-guide author notes that most purpose-built rear ladders target the high roof, and that a standard-roof van should check the step count against its real roof height.13 See the Sprinter ladders guide.
Weight classes and rear wheels
Mercedes sells the cargo van in 2500, 3500, 3500XD, and 4500 series.5 A 1500 was also offered in early years; J.D. Power says the 1500 was dropped for 2024.31 Gross vehicle weight ratings changed with model year and configuration, so this guide does not quote a number. The door-jamb label on your van controls, and Mercedes' guideline tells upfitters not to exceed the unloaded, axle, and gross ratings.2
The practical fitment question is single or dual rear wheels. Sandy Vans lists its spare tire bracket as not fitting the dual-rear-wheel 3500XD, and Flatline Van Co. says its rear tire carrier needs additional Mercedes parts on the 3500 dually.2712 Roambuilt asks for its own frame brackets on a 2WD or a 3500 dually and says the 3500 install means removing the DEF tank to drill frame holes.24
Single rear wheels (2500 and many 3500s)
What changed by year
The VS30 body is stable across its run, and most accessories depend on the body, not the year. The changes below are the ones that moved fitment or showed up in brand fitment lists. Where the sources did not show a fitment-relevant change, the table says so instead of guessing.
| Model year | What changed | Fitment impact |
|---|---|---|
| 2019 | Third generation arrives in the U.S. A 2.0-liter gas engine (188 hp) and a 3.0-liter V6 diesel (188 hp, 325 lb-ft) are offered; 4WD is paired with the V6.29 | The baseline for the 4x4 era. Body, doors, and roof set the pattern for later years. |
| 2020 to 2022 | No accessory-relevant change turned up in the sources used. 2022 is the last year before the powertrain change.4 | Parts listed "2019 to 2022" cover this span, usually split by 4x4.23 |
| 2023 | Fully four-cylinder lineup. The new OM654 diesel comes in 168 and 208 hp (Mercedes' figures), a nine-speed automatic is standard, and AWD replaces the selectable 4x4.46 The underside changes: a taller front subframe and differential, and 2023-specific skid plates.20 | The big split for skid plates, lifts, and steps. Winch and light mounts were reworked because added cooling took space behind the bumper and grille.20 |
| 2024 | The gas engine is gone; the diesel stays in two outputs.7 Owners had been told in 2023 that 2023 would be the last gas year.30 The 1500 class is dropped.31 | Mostly a catalog cleanup. At least one seller lists power steps for 2024 and 2025 separately from 2019 to 2023.26 |
| 2025 | Mercedes' 2025 brochure lists a 10.25-inch MBUX touchscreen.5 Brand notices describe two front radar sensor setups and tell owners to check fit.25 | Front bumpers, bumper-mounted lights, and some mounting kits list 2025 on its own or add a note.242526 |
| 2026 | WNDR Built did not find a published list of fitment changes for 2026 in the sources used. | Treat "2019+" listings as a claim to confirm against your exact year. |
Selectable 4x4 versus 2023 AWD
Through 2022, the VS30 could be ordered with a selectable 4x4 paired with the V6 diesel.29 For 2023, Mercedes replaced it with an AWD system that sends torque automatically, up to 50 percent to each axle, where the old system split 35 percent front and 65 percent rear in 4x4 mode.46 Mercedes says the AWD keeps the ground clearance and the approach, departure, and breakover angles of the system it replaced.4
That statement is about angles. Parts suppliers report differences you can see on a lift. Van Compass found a taller front subframe and front differential on the 2023 van that gave a slight front ride-height increase, a new transmission mount cross member, and a fuel filter moved forward of the tank.20 Its non-lift kits still fit; its engine skid plate needed a 2023-specific version.20
| 2019 to 2022: selectable 4x4 | 2023 and newer: AWD | |
|---|---|---|
| Engine | V6 diesel or gas | Four-cylinder diesel |
| Torque split | 35% front, 65% rear in 4x4 mode | Up to 50% per axle, automatic |
| Skid plates | Listed separately | Listed separately |
| Lift kits | Listed separately | Listed separately |
Roof, door, and window products usually cross the line.
| Product type | 2019 to 2022 (4x4 or 2WD) | 2023 and newer (AWD or 2WD) |
|---|---|---|
| Engine skid plates | Listed for 2015 to 2022 4x4; a 2WD van needs the brand's lift kit to use it.23 | Separate listings for 2023 and newer AWD, in 2500 and 3500 versions.22 |
| Side steps and rocker guards | Listed by wheelbase and drivetrain. | One brand's 2023-and-newer AWD guard is 144-inch only, and not compatible with its 2-inch lift.21 |
| Lift kits and suspension | Written for the selectable 4x4 front end. | Revised for the taller front subframe; non-lift stages still fit.20 |
| Roof, rear door, windows, screens | Same body. | Same body; the drivetrain does not change these.2 |
If you are shopping suspension, see the suspension brand index. For underbody protection, see the skid plate index.
The roof: rails, bows, and the load limit
Roof accessories are where most VS30 fitment questions start. Mercedes' body-builder guideline frames the limits.12
- The roof has a stated load limit. 300 kg (661 lb) for a low roof, 150 kg (331 lb) for a high roof, and 100 kg (220 lb) for the cab. These are the "laden" limits for a roof rack.1
- Mercedes recommends factory rails. The guideline says to use roof rails and order option code D13, "mounting rails for roof rack." D13 is not available from the factory on cabs.1
- Weight should be spread out. The rule of thumb is 50 kg (110 lb) per pair of support feet and struts, with at least six pairs on the low roof and three on the high roof, and less load for a shorter rack.1
- The structure has set points. The 2025 edition calls for at least five roof bows on the 144 and six on the 170 in the cargo van.2
- Large loads can affect driving assistance. The guideline warns that large objects on a roof rack may interfere with the driver-assist systems.1
- Low-roof van661 lb
- High-roof van331 lb
- Cab220 lb
Mercedes-Benz Body and Equipment Guideline BM907, Edition 2022-5, as printed in pounds. Scale: largest limit = 100%. Source 1.
Rail hardware is a practical limit too. Owners of vans with factory rails report that the rail channel does not take every bolt: a nut cannot drop in if another mount blocks the open end, and some awning brackets need rework on certain rails.1718 Plan the layout of rack, panels, fan, and awning together. See the Sprinter roof racks guide.
Rear doors, hinges, and openings
The 180-degree versus 270-degree hinge
Anything bolted to the rear doors, such as a ladder, tire carrier, or cargo box, loads the door and its hinges. On the VS30, the hinge is the main fitment variable. The van was ordered with either 180-degree or 270-degree rear doors.813 Owl Outdoor describes the check this way: if the hinges have holes, they are 180-degree hinges; if the doors open all the way and fold flat along the side of the van, they are 270-degree hinges.8

Most commercial carriers and racks use the 180-degree hinge as the main mounting point, so a van with 270-degree hinges needs a swap first. Owl, Sandy Vans, and Flatline all sell or bundle a factory 180-degree hinge for this reason.91012 Sandy Vans describes its hinge as an OEM Mercedes part with threaded holes that take rack hardware, plus a 180-degree stop that keeps accessories off the bodywork. It lists the swap as a one-to-two hour DIY with a helper, one door at a time.10
Owners agree. In a Sprinter-Source thread, replies say the fix for a cargo carrier is to replace the 270-degree hinges, and one installer says every carrier they have fitted uses the 180-degree hinges as the main mounting point, not the door skin.14 A ladder guide adds that any hardware on a 270-degree door needs a travel limiter, which cuts into the benefit of the wide swing.13
180-degree hinge
This is different from the NCV3, whose single factory hinge design has no separate 180-degree option, which is why only a few makers build for it. See the NCV3 fitment guide. For how each style loads the doors, see the rear door racks, tire carriers, and ladders guides.
Tire size and the rear lights
Rear-door tire carriers also hit a sensor limit. Flatline Van Co. says its carrier fits tires up to 285 width without changes, but tires over 275/70R17 may occasionally trip the sensor in the rear light assembly.12 Ask any carrier brand about the tire size you plan to run.
Sliding door and side windows
Window covers and bug screens follow the body openings, which do not change across the run. KnightVision lists a magnetic driver and passenger window set for 2019 to the present.28 Crew and passenger vans have more glass than cargo vans, so confirm body style as well as year. See the window covers guide and the bug screens guide.
Front end, sensors, and bumpers
Mercedes puts the parking, collision-prevention, and blind-spot sensors behind the plastic bumpers.3 A Mercedes bulletin warns that paint thickness and metal content affect radar, and limits the paint on unpainted or primed bumpers to a thin layer plus clear coat.3 A bumper or light mount that moves or blocks a sensor is therefore a fitment problem, not only a cosmetic one.
The guideline is explicit for the front radar. Upfitters may not change the sensor's position or replace its holder, and a service calibration is required if an upfitter's body tilts the vehicle by more than 1.5 degrees front to back.2 That matters for heavy front bumpers and some lift kits, so ask the brand how it handles radar calibration.
The 2025 model year is where lists start to differ. Roambuilt lists its low-profile front bumper for 2019 to 2024 and notes that 2025 and newer vans must keep a particular piece for the install.24 A light-bar bracket maker tested its mount on 2019 to 2024 vans and says the 2025 Sprinter has two front radar setups, with a possible conflict on vans that have the adaptive cruise package.25 A step maker says AMP Research does not produce an official kit for 2024 and 2025 vans, and sells its own kit instead.26
See the Sprinter bumpers guide and the front bumper comparison.
Fitment by accessory category
This table maps each category to the fields that drive fitment on a VS30. Each row points to the full guide and the brand index.
| Category | What drives fitment | Read next |
|---|---|---|
| Roof racks | Wheelbase, roof height, factory rail option, roof load limit.12 | Roof racks guide, brand index |
| Ladders | Side or rear mount, roof height, hinge angle for rear ladders.13 | Ladders guide, brand index |
| Rear door racks and cargo boxes | Hinge angle, door weight, single or dual rear wheels.1014 | Rear door racks guide |
| Tire carriers | Hinge angle, dually, tire size, rear-light sensor.81227 | Tire carriers guide, brand index |
| Side steps | Model-year groups, drivetrain, wheelbase, rear A/C or heater options.2126 | Side steps guide, brand index |
| Bumpers | Model year (especially 2025), radar and sensors, 2WD or dually brackets.2425 | Bumpers guide, brand index |
| Skid plates and suspension | 2019 to 2022 versus 2023 and newer, drivetrain, lift height.202223 | — |
| Bug screens, window covers | Body style and openings; check the year range.28 | Bug screens guide, window covers guide |
| Awnings, fans, solar | Roof load limit, rail layout, wheelbase.117 | — |
Browse everything listed for this van in Sprinter parts and the Mercedes-Benz Sprinter collection. Not sure which generation you have? The vehicle picker sorts the catalog by van.
Common problems owners report
These come from Mercedes' published numbers, brand pages, and owner posts. Forum posts are individual reports, not studies.
Rear-door gear will not fit the 270-degree hinges
An owner who planned a cargo carrier found that most commercial products need the 180-degree hinge, and replies said the fix is a hinge swap.14 Brands list the swap as a separate option, and one sells it as an add-on for vans with 270-degree factory hinges.9
What to look for: Check your hinge before you order, and decide on the swap before the carrier. Ask whether the carrier uses the hinge as its main mount.
Water leaks at the roof seams and pillars
A 2021 owner reported a leak behind the sliding door that the dealer could not resolve after two visits, and believed the seams needed rewelding. A 2024 owner found a leak at a tack-welded seam at the top of the rear pillar. Replies recommended a zone-by-zone hose test and sealing from the outside.16 A repair guide adds that water travels, so the drip is often not the entry point.19
What to look for: Inspect a new van's seams and panels, and before you add rails or a rack, test for leaks first. Prefer mounts that follow the factory attachment points and a documented sealing method.
The rack is rated for more than the roof
A brand's dynamic rating of 500 lb sits against Mercedes' 331 lb high-roof limit, and the van's limit includes the rack.151
What to look for: Get the rack's weight, then add solar, a fan, an awning, and cargo. Plan against Mercedes' number.
Rust where a rack clamps to the roof
One long-time rack builder reports that rust "went nuts" at rack clamping points on vans where no rubber gasket was used, and says a gasket kept theirs clean for ten years. That owner's rack was on a T1N, so treat it as general advice for painted steel roofs rather than a VS30 finding.15
What to look for: Ask what gasket or isolator is in the kit and how the contact points are sealed.
Rail hardware and awning brackets do not match
Owners report difficulty finding bolts for the factory rail channel, especially when another mount blocks the open end. Another owner says an awning maker could not say which brackets suit which rails, and one rail owner ground down small line guides to make the brackets fit.1718
What to look for: Choose the awning, panel, and rack together, and confirm that the awning brackets list your rail type.
The 2023 front end breaks old fitment
A parts maker tore down a 2023 van and found a taller front subframe and differential, a changed transmission mount, added cooling that took space behind the grille, and a moved fuel filter. Skid plates, winch mounts, and light mounts needed new versions.20
What to look for: Match skid plates, lifts, and steps to 2019 to 2022 or 2023 and newer. Ask whether a 2WD van is supported.
A bumper or light mount fights the radar
The 2025 Sprinter has two front radar setups, and one bracket maker does not list 2025 yet while it tests the fit.25 Mercedes also tells upfitters not to move the radar or change its holder.2
What to look for: A bumper listing that names the radar, parking sensors, and your exact year.
Dually vans fall outside the listing
Spare tire brackets and rear carriers list the dually as excluded or as needing extra parts, and a bumper maker asks for its own frame brackets on a 2WD or a 3500 dually.271224
What to look for: A fitment line that names your rear-wheel layout, or a written reply from the brand.
Fitment terms explained
- VS30 / 907 / W907
- The third-generation Sprinter. Parts for the NCV3 or T1N should not be assumed to fit.2
- 144 / 170 / 170 Ext
- The wheelbases and the long body that shares the 170-inch wheelbase.25
- D13 mounting rails
- Mercedes' factory option for mounting roof racks. The guideline recommends the rails and says cabs cannot get them from the factory.1
- Roof bow
- The structural cross members under the roof skin. The guideline sets a minimum number for the cargo van.2
- Roof load
- The maximum weight on the roof, including the rack. Different from a rack's rated capacity.1
- 4x4 / AWD
- The selectable 4x4 (through 2022) versus the automatic all-wheel drive that replaced it for 2023.4
- SRW / DRW
- Single rear wheels versus dual rear wheels (dually). Brands list some products as not fitting the dually.27
- 180 / 270 hinge
- How far the rear door opens, set by the hinge. It drives rear-door accessory fitment.8
- Radar service calibration
- A recalibration of the front radar that Mercedes requires after certain body or vehicle-position changes.2
Before-you-order checklist
- Confirm the generation. The part should say VS30, 907, or 2019 and newer, and name an end year if it has one.1124
- Write down the configuration. Wheelbase (144, 170, or 170 Ext), roof height (standard or high), body style, series (2500, 3500, 3500XD), and single or dual rear wheels.25
- Check the drivetrain and year. Note 2WD, 4x4, or AWD, and whether your van is 2022 or earlier, or 2023 or newer.42223
- Check the hinges. Open both rear doors fully. If they fold flat along the side, you have 270-degree hinges.8
- Check the roof prep. Look for the factory rails on the build sheet if you plan to mount a rack or awning.1
- Total your roof load. Add the rack, panels, fan, awning, and cargo, and compare against 331 lb for a high roof.1
- Check the front end year. For bumpers and lights, confirm the model year and radar setup, especially for 2025.2425
Questions to ask the brand
Ask before you order
- Which model years, wheelbases, roof heights, and drivetrains is this part built and tested for on the VS30?
- Does it need the 180-degree rear door hinge, and is a hinge swap included or sold separately?
- Does it mount to the factory roof rails, the hard points, or its own holes, and what gasket or sealing is in the kit?
- What does the product weigh, and what roof load do you recommend for my roof height?
- For steps, skid plates, and suspension: is there a separate version for 2023 and newer AWD, and is a 2WD van with a lift supported?
- For bumpers and lights: which exact years, and does it keep the factory radar and parking sensors? Does the 2025 front end change the fit?
- For rear-door products: is the dually supported, and what tire size does it hold?
- Is the part available now, and what is the lead time?
Examples in the WNDR Built index
These are examples of fitment features, not recommendations. Each shows one thing from this guide. Details come from the brand's own pages as of October 2026.
Example: rear-door carrier with a hinge swap option
Owl Outdoor B2 Flex Rear Door Carrier [VS30 2019+]
- Driver, passenger, or both
- Needs 180-degree hinges
The brand offers a factory 180-degree hinge swap for vans with 270-degree hinges as an add-on.9
Example: a bracket that excludes the dually
Sandy Vans SV Spare Tire Bracket [VS30 2019+]
- 6x130 mm bolt pattern
- Not for the dually
The brand says it bolts to its own racks or any rear rack with matching holes, and does not fit dual-rear-wheel vans.27
Example: a step split at the 2023 line
Van Compass Rocker Guards, Sprinter AWD 144 (2023+)
- AWD, 144 only
- Not for the 2-inch lift
Listed for 2023 and newer, with front tie-in mounts that depend on lift height. A 2WD van needs a lift kit first.21
Example: power steps listed by year group
Sprintek + AMP Research Electric Boards, VS30 2024-2025
- 2024 to 2025 listing
- Rear A/C or heater options
A separate 2019 to 2023 listing exists. The seller says AMP Research makes no official kit for 2024 and 2025 vans.26
Example: a bumper written around the sensors
Roambuilt Low-Pro Front Bumper (Sprinter 2019+)
- Parking sensors and Active Brake
- 2025+ note; 2WD and dually brackets
The brand lists 2019 to 2024 fitment, asks 2025 and newer owners to keep a specific piece, and sells frame brackets for 2WD and dually vans.24
Example: window covers bounded by year
KnightVision Driver/Passenger Window Cover Set (2019 to present)
- Magnetic mount
- 2019 to present
The brand lists a model-year range and a no-hardware magnetic mount.28
Key takeaways
- Match by generation and configuration: wheelbase, roof height, series, and rear-wheel layout.
- Check the rear door hinge first. Most rear-door products need the 180-degree hinge.
- The 2023 line splits skid plates, lifts, and steps because the engine, drivetrain, and front end changed.
- Mercedes limits the high roof to 331 lb including the rack. A rack's own rating is a different number.
- Respect the radar and parking sensors when you shop bumpers and lights, and read the end year of any range.
- For the dually, a 2WD van, or a 2025 van, expect extra questions for the brand.
Frequently asked questions
What years is the Sprinter VS30?
It is the third-generation Sprinter, sold in the U.S. from the 2019 model year to the present. Mercedes' current body-builder guideline covers it as the BM907.229
Will NCV3 parts fit a VS30?
Often not, especially rear-door and hinge parts. Sandy Vans says its VS30 hinge does not fit the older body, and its spare tire rack does not fit NCV3 vans.1011 See the NCV3 fitment guide.
How do I tell if I have 180-degree or 270-degree rear door hinges?
Open both rear doors fully. If the hinges have holes and the doors stop square to the rear, they are 180-degree hinges. If the doors fold flat along the side of the van, they are 270-degree hinges.8
Will 2019 accessories fit a 2023 or newer van?
Roof, door, and window products often do, because the body is the same. Skid plates, lifts, steps, and some bumpers may not, because the drivetrain and front end changed.202122
How much weight can I put on a VS30 roof?
Mercedes lists 300 kg (661 lb) for a low roof and 150 kg (331 lb) for a high roof, including the rack.1 Rack ratings are a separate number.
Is the 170 Extended the same as the 170 high roof?
No. The Extended shares the 170-inch wheelbase but has a longer rear overhang, and brands list it as its own fitment.2
Keep planning your build
- Fitment guide Sprinter NCV3 (2007 to 2018) The generation before the VS30, with its own door and hinge rules.
- Buyer's guide Sprinter roof racks How rack styles mount and what the roof limit means.
- Buyer's guide Sprinter rear door racks Hinge mounts, door weight, and what gets loaded onto the doors.
- Buyer's guide Sprinter tire carriers Hinge angle, tire size, and the dually question.
- Buyer's guide Sprinter bumpers Radar, sensors, and year splits for front and rear.
Sources
- Mercedes-Benz — Body and Equipment Guideline Sprinter BM907, Edition 2022-5 (search-result excerpt) checked Oct 2026
- Mercedes-Benz — Body and Equipment Guideline Sprinter BM907, Edition 2025-6 (search-result excerpt) checked Oct 2026
- Mercedes-Benz — Sprinter MY2019+ Sensors vs paint (upfitter bulletin; search-result excerpt) checked Oct 2026
- MotorWeek — Mercedes-Benz USA to Offer New All-Wheel Drive, Diesel Engine in Sprinter Van (report on Mercedes' March 2022 announcement) checked Oct 2026
- Mercedes-Benz USA — The 2025 Sprinter and eSprinter brochure (search-result excerpt) checked Oct 2026
- Automotive Fleet — Mercedes-Benz Vans Unveils New Sprinter AWD System (report on Mercedes' March 2022 announcement) checked Oct 2026
- Car and Driver — 2024 Mercedes-Benz Sprinter Review, Pricing, and Specs (search-result excerpt) checked Oct 2026
- Owl Outdoor — Owl Expedition Tire Carrier for 2019+ Sprinter checked Oct 2026
- Owl Outdoor — Sprinter Full Rear Door Carrier (2019+), B2 Flex checked Oct 2026
- Sandy Vans — Sprinter 180 Degree Rear Door Hinges checked Oct 2026
- Sandy Vans — SV Spare Tire Rack (search-result excerpt) checked Oct 2026
- Flatline Van Co. — Sprinter Rear Tire Carrier (fitment notes from search-result excerpt) checked Oct 2026
- DVA Mechanics — Sprinter Rear Ladder: Check 270° Hinge Clearance Guide (retailer guide quoting owner reports) checked Oct 2026
- Sprinter-Source — Solution needed for 270 degree hinges, cargo system (owner reports) checked Oct 2026
- Sprinter-Source — Roof Rack Weight Limit (owner reports) checked Oct 2026
- Sprinter-Source — Water leak rear of side sliding door (owner reports) checked Oct 2026
- Sprinter-Source — T bolts for VS30 roof rails (owner reports) checked Oct 2026
- Sprinter-Source — Van tech roof rails or OEM, awning brackets (owner reports) checked Oct 2026
- DVA Mechanics — Sprinter Roof Leak: Find the Entry Point Before Resealing (retailer guide; search-result excerpt) checked Oct 2026
- Van Compass — What's new with the 2023 Sprinter AWD? checked Oct 2026
- Van Compass — Rocker Guards, Sprinter AWD (2023-up, 144" wheelbase only) checked Oct 2026
- Van Compass — Engine Skid Plate, Sprinter AWD (2023-up 2500; search-result excerpt) checked Oct 2026
- Van Compass — Engine Skid Plate, Sprinter 4x4 (2015-2022; search-result excerpt) checked Oct 2026
- Roambuilt — Mercedes Sprinter (2019-2025) Low-Pro Front Bumper checked Oct 2026
- KC HiLiTES — Radar Sensor Fitment Notice, 2025 Mercedes-Benz Sprinter (brand notice; search-result excerpt) checked Oct 2026
- SprinterStore — Sprintek Power Running Boards w/ AMP Steps, 2024-2027 (retailer listing) checked Oct 2026
- Sandy Vans — Spare Tire Bracket for Van Racks checked Oct 2026
- KnightVision Development — Sprinter Driver/Passenger Window Cover Set 2019-Current checked Oct 2026
- CARFAX — 2019 Mercedes-Benz Sprinter Review, Pricing, and Specs (search-result excerpt) checked Oct 2026
- Sprinter-Source — 2024 1500 gas gone??? (owner reports) checked Oct 2026
- J.D. Power — Mercedes-Benz Sprinter Passenger Van model year history (search-result excerpt) checked Oct 2026
Fitment and availability change. Confirm compatibility with the brand's application list for your exact van before you buy. Sources marked as search-result excerpts were seen only as excerpts of the page and are labeled that way.
