Home›Tools›Tire Size Calculator
Free planning tools

Tire Size Calculator

Compare your current tires with a new size, drawn to scale. See the change in diameter, sidewall, rim, ground clearance, speedometer reading and engine RPM.

Your tire sizes

Metric or flotation sizes. Try 245/75R16 or 33x12.50R17.

Every dimension

Nominal dimensions, before load or tread wear.

MeasurementCurrentNewChange
Engine RPM

Compare gearing at your cruising speed.

Estimate assumes a 1:1 transmission ratio. Overdrive, tire deflection and drivetrain slip change road RPM.

Diameter difference
—
DRAWN TO SCALE
Current · dashed outlineNew · solid outlineDifference · gold hatch

Speedometer change

If calibrated for your current tire size.

actual mph
when the dash reads 60
Dash · mphActual · mphActual · km/h

Calculated from the diameter ratio. Your vehicle’s existing speedometer error is not included.

Plan with confidence

How it works

  1. Enter two sizes.

    Type a metric size like 245/75R16 or a flotation size like 33x12.50R17, or build one from the menus.

  2. See the difference drawn to scale.

    The new tire sits on the same ground line as the current one, with the extra size shaded and labeled.

  3. Check speed and gearing.

    Open the speedometer table, or enter your axle ratio to see engine RPM at cruising speed.

  4. Share it.

    The page address updates with both sizes, so you can send the comparison to someone.

Good to know

Frequently asked questions

How do you calculate tire diameter?

For metric sizes, diameter is the rim diameter plus two sidewalls, and each sidewall is the tread width times the aspect ratio. A 245/75R16 works out to about 30.5 inches. For flotation sizes like 33x12.50R17, the first number is the diameter in inches.

How far off will my speedometer be with bigger tires?

Your actual speed equals the speedometer reading times the new diameter divided by the old one. Going from 225/45R17 to 225/50R17, the dash reads 60 mph while you're actually doing about 62.1 mph.

How do bigger tires change engine RPM?

RPM at a given speed is roughly speed times axle ratio times 336, divided by tire diameter in inches. Taller tires lower RPM: with a 3.73 axle at 65 mph, a 25.86-inch tire turns about 3,150 RPM. The estimate assumes a 1:1 transmission ratio.

How much ground clearance do bigger tires add?

About half the increase in tire diameter, because the axle rises by the change in radius. A tire that's 1 inch taller adds about 0.5 inch under the axle. It doesn't lift the body the way a suspension lift does.

What happens when I change rim size?

If the overall diameter stays the same, a larger rim means a shorter sidewall. The calculator labels the rim change separately, so you can see how much is rim and how much is rubber.

Does this tell me if a tire will fit my van?

No. It compares sizes on paper. Fit depends on your wheels, suspension, fenders and any lift, so confirm with your installer before you buy.

Other toolRoof Load Planner