Mercedes-Benz Sprinter
North America: 2002βpresent
T1N, NCV3, and VS30 are separate generations. Wheelbase, roof, body length, drivetrain, axle, and doors create further splits.
The reference index
Explore equipment, compare published specs, and check what changes fitment.
Choose a van below, or search the index above. Dotted terms open field notes right here.
Choose your van first. Each guide explains the model-year breaks and configuration details that can change fitment.
North America: 2002βpresent
T1N, NCV3, and VS30 are separate generations. Wheelbase, roof, body length, drivetrain, axle, and doors create further splits.
United States: 2015βpresent
The 2020 update, RWD versus AWD, Transit Trail, and E-Transit create separate body, suspension, sensor, and underbody checks.
North America: 2014βpresent
Wheelbase, body length, roof, front fascia, rear doors, and gas versus electric powertrain are the main starting points.
Mounting, roof layout, load, height, access, and equipment conflicts.
Entry height, ground clearance, coverage, mounting, and daily use.
Coverage, weight, recovery points, sensors, cooling, and installation.
Load paths, hinge use, visibility, door swing, and clearance.
Airflow, insect control, door use, sealing, storage, and setup.
Blackout, heat control, attachment, moisture, coverage, and storage.
Van reference
The North American Sprinter spans three distinct generations: T1N, NCV3, and VS30. Identifying the generation is the first step, but wheelbase, roof height, body length, drivetrain, rear axle, and door configuration can still divide fitment within the same generation.
Do not use the Sprinter badge alone as a fitment check. Start with the model year and generation, then record the configuration details that affect the mounting area.
The first North American Sprinter, sold with Freightliner and Dodge badges. Its body and mounting points do not carry forward automatically to later generations.
A separate body generation with a 2014 facelift and factory 4Γ4 beginning with the 2015 model year.
The current generation. Selectable 4Γ4 used through 2022 was replaced by full-time AWD for the 2023 model year.
Which Sprinter do I have? T1N, NCV3 and VS30 identified β
Sprinter 4Γ4 vs AWD: the 2023 model-year change β
Sprinter, Transit and ProMaster nicknames and reputations β
Every Sprinter product in the VanWiki, by category. Each list can be narrowed by generation and brand, and every entry links to its product page and maker.
Choose the mounting area or system. Each guide explains what the equipment does, the tradeoffs, and the questions to settle before product comparison.
Factory roof rails or mounting points, roof length, vents, solar, awnings, finished height, and access.
Open equipment guide βDrive configuration, wheelbase coverage, ground clearance, slider-door use, and mounting method.
Open equipment guide βGeneration, fascia, sensors, cooling, recovery loads, added weight, and front or rear clearance.
Open equipment guide βDoor hinges, 180Β° or 270Β° opening, glass, cameras, ladders, spare tires, and combined door load.
Open equipment guide βDoor opening, high-roof or body variation, sealing, daily access, and screen storage.
Open equipment guide βWindow location, factory trim, attachment, blackout, heat control, moisture, and storage.
Open equipment guide βVan reference
The full-size Transit entered the United States for the 2015 model year. The 2020 update, rear-wheel drive versus all-wheel drive, Transit Trail, and E-Transit are the first platform splits to check before body, roof, wheelbase, door, and factory-equipment details.
Record the model year, powertrain, drivetrain, wheelbase, body length, roof height, rear-door type, and factory exterior equipment. Treat E-Transit underbody, suspension, charging, HVAC, and weight-related fitment as a separate research lane unless the equipment maker confirms compatibility.
The original US full-size Transit fitment lane. Later fascia, sensor, dash, drivetrain, suspension, and underbody parts should not be assumed to carry backward.
The 2020 update added available factory AWD, revised engines and transmission, a new fascia, interior changes, and expanded driver-assistance equipment.
Factory ride height, track width, cladding, tires, and steps can change suspension, wheel, step, flare, and bumper-adjacent fitment.
Body-mounted compatibility can overlap only when documented. Battery, charging, floor, underbody, suspension, HVAC, and weight assumptions require EV-specific confirmation.
Read the complete Ford Transit fitment guide
Ford E-Transit: specifications and accessory fitment β
Sprinter, Transit and ProMaster nicknames and reputations β
Every Transit product in the VanWiki, by category. Each list can be narrowed by generation and brand, and every entry links to its product page and maker.
Roof length and height, factory mounting provisions, vents, solar, awnings, height, and access.
Open equipment guide βWheelbase, RWD or AWD, Trail equipment, slider-door coverage, clearance, and mounting.
Open equipment guide βPre-2020 or 2020+ fascia, sensors, cooling, recovery loads, added weight, and clearance.
Open equipment guide βLow, medium, or high roof body; door hinges; glass; cameras; and combined door load.
Open equipment guide βDoor dimensions, roof and body configuration, sealing, access, and storage.
Open equipment guide βWindow location, factory trim, attachment, blackout, heat control, moisture, and storage.
Open equipment guide βVan reference
The North American ProMaster begins with the 2014 model year. Wheelbase, body length, roof height, front fascia, rear-door configuration, and gas versus electric powertrain are the first checks for bolt-on equipment.
Record the model year, wheelbase, body length, roof height, rear-door type, powertrain, and factory exterior equipment. The 2023 front-end change and ProMaster EV require separate checks in the areas they affect.
The launch-era front-wheel-drive platform. Body, wheelbase, roof, and gas-versus-diesel details are the main starting points.
A revised grille and added configurations arrived for 2019. Later safety, camera, and mirror options matter near sensors and electronics.
Transmission, steering, parking-brake, infotainment, and safety changes make 2022 a separate electrical and drivetrain research break.
The new front fascia and lighting can split bumper and front-accessory fitment. Super-high-roof and roll-up-door configurations create additional roof and rear-door checks.
Battery, floor, suspension, underbody, electrical, charging, HVAC, and weight-related fitment require EV-specific confirmation.
Read the complete Ram ProMaster fitment guide
Ram ProMaster EV: specifications and accessory fitment β
Sprinter, Transit and ProMaster nicknames and reputations β
Every ProMaster product in the VanWiki, by category. Each list can be narrowed by generation and brand, and every entry links to its product page and maker.
Wheelbase, body and roof length, factory mounting provisions, vents, solar, awnings, and access.
Open equipment guide βWheelbase, body length, slider-door coverage, ground clearance, and mounting method.
Open equipment guide βPre-2023 or 2023+ fascia, sensors, cooling, recovery loads, added weight, and clearance.
Open equipment guide βStandard doors or roll-up door, hinges, glass, cameras, ladders, and combined loads.
Open equipment guide βDoor opening, roof and body configuration, sealing, access, and storage.
Open equipment guide βWindow location, factory trim, attachment, blackout, heat control, moisture, and storage.
Open equipment guide β