RAM ProMaster Van Bug Screens: The Complete Buyer's Guide
Share
A RAM ProMaster has three openings where bugs get in: the sliding door, the rear barn doors and the cab doors. A screen for each lets you sleep with the van open, but the right one depends on your roof height, how you use the slider and what your conversion has built beside it. This guide explains how ProMaster screens work, what to check before you order, and what ProMaster owners say goes wrong.
- Fits RAM ProMaster full-size van, 2014 to current
- Covers Slider, rear door, cab door and garage screens
- Sources 30, including owner reports
- Last checked Nov 2026
Quick answer
- Start with roof height. One maker lists Low, High and Super High roofs for its slider and rear screens. Another lists High roof only. Standard-roof vans have the fewest choices.5689
- Check your wheelbase and your slider. One maker's slider screen lists 136 and 159 length vans only and says it is not compatible with electric or automatic sliding doors.8
- Ask for the mesh count. The CDC says many common screens have holes too big to stop biting midges and points to 20x20 mesh.1 No ProMaster screen page I read gives a count.
- Decide how it attaches. Sewn-in magnets come off quickly but let go in wind and grab the floor. Clips tucked under the door's weather seal stay put but take hours to fit.2718
- Think about the walk-through. Where the seam sits matters most beside a galley or cabinet. One maker offsets the opening about 14 in from the edge of the door.6
- Plan for the slider's own quirks. Owners describe a trim piece at the forward edge, a pillar trim that tugs the screen's corner, and a slider that already takes effort to close.71920
What a screen has to stop
"Bug screen" covers two jobs. Mosquitoes and flies are large enough that almost any mesh stops them. Biting midges, called no-see-ums, are why mesh size matters. They are small flies, and the CDC warns that many commonly used window and door screens do not have holes small enough to keep them out.1
The CDC tells readers to look for mesh measuring 20x20 and suggests a fan to blow midges away.1 A van-screen maker draws the same line: standard window screen is roughly 18x16, and no-see-um mesh is 20x20 or finer. It adds that finer mesh trades some airflow for protection.2
A fan helps too. The CDC suggests using one to blow biting midges away when you are outdoors,1 which suits a van with the slider open.
How ProMaster bug screens work
A van bug screen is a mesh panel that fills one opening, with a way to walk through and a way to fix the edges to the van. ProMaster screens are made for three openings, and they do not swap.

The three openings
- Sliding door. The passenger-side slider is the opening you use most. Stellantis lists it at 49 in wide on cargo vans.3 Slider screens usually roll up toward the top of the opening and have a walk-through seam.68
- Rear barn doors. The rear doors swing open 260 degrees and the opening is 60 in wide.3 Rear screens fill that opening. Many have a center zipper, and some add a half-height privacy panel to hide the cargo area.59
- Cab doors. Front door nets are a different product: they cover the cab door windows so you can roll the glass down.101213
How the screen attaches
Clips under the weather seal
A third type sits between the two. One ProMaster maker describes a screen with magnets sewn into the edge of each curtain, a magnetic center divider and tiebacks, and says it can stay in place with the door closed.1415 And a fourth is a rigid sliding screen door that mounts into the opening on a threshold. A ProMaster owner thread from 2017 describes one: it needed the right floor height, a tension adjustment and a dry lubricant on the threshold to slide well.21 That thread is old, so check whether any maker still sells one for your van.
Closure: magnet, zipper or both
The seam is where you walk through. A maker's guide says magnets are hands-free, but weak or misaligned magnets leave gaps, and a screen with magnets only at the seam billows in wind. Zippers seal predictably but cost you a free hand every time.2 A top zipper that lets you remove the mesh for the off-season while leaving the mounting in place is a feature worth looking for.256

The Bug Wall's own advice is to pick the closure by how often you use the door: magnets on a slider you walk through all day, zippers on a rear door a bed blocks.30
What to look for
Use this checklist before you compare brands. Each item says why it matters and how to check it.
- Roof height. Standard, High and Super High roofs have different door shapes, and makers list sizes per roof. One maker's slider and rear pages list Low, High and Super High; another lists High roof only.5689 Check the roof line on the product page, not just "ProMaster."
- Wheelbase. One maker's rear screen names 118, 136 and 159 length vans, while its slider and bundle name 136 and 159 only.8911 If you have a 159 Extended, ask.
- Which openings it covers. Some makers cover slider, rear and cab. Others sell only cab nets or only door screens.8910121314 Mixing brands is common, so confirm each piece.
- Mesh count. Look for 20x20 or finer if no-see-ums are your problem.1 If the page only says "no-see-um," ask.
- Attachment and what you will have to remove. Clip-in screens need access to the weather seal around the whole opening, so trim, panels or furniture over the flange get in the way.719 Magnet screens need exposed metal.2 Check how your build finishes the door opening.
- Seam position. Center is the common choice. If a galley, sink or cabinet sits beside your slider, an offset seam toward the open side keeps the walkway clear.26
- Bottom edge. Foam or padding along the bottom weights the screen and helps it roll up.568 Check how it meets your floor or step. Owners say bottom magnets can grab a metal floor plate.18
- Roll-up size. A rolled slider screen takes room at the top of the opening. A forum poster asking about a cabinet within about an inch of the closed slider was worried the rolled screen would not clear.19
- Powered or manual doors. One maker states its slider screen is not compatible with electric or automatic sliding doors.8 I found no source that says whether a factory power slider exists on the ProMaster, so ask.
- Privacy and garage area. Full mesh shows what is stored behind the rear doors in daylight. Half-mesh versions with a privacy panel, and a lower-half garage screen, hide it.5929
- Warranty and returns. Some covers are special order and non-returnable, and a warranty may cover defects only.17 Others publish return windows or a lifetime warranty on nets.1213
Specs explained
- Mesh count (20x20)
- The number of strands per inch each way. Higher means smaller holes. The CDC points to 20x20 for biting midges; common window screen is coarser.12
- No-see-um mesh
- A marketing label for mesh fine enough to stop biting midges. Without a count, you can't compare two screens that both use the phrase.12
- Roof height (Low, High, Super High)
- Makers use their own names. Ram's cargo-height figures are 66 in for standard roof, 77 in for high roof and 86 in for super high roof.3 The Bug Wall calls its smallest size "Low."56
- Offset opening
- The walk-through seam sits off-center. One maker places it about 14 in from the edge of the door opening, toward the front or the rear of the van.6
- Magnet closure vs. zipper closure
- Magnets close by themselves behind you; zippers seal fully but need two hands.2 Some makers sell the same screen with either choice.56
- Top zipper
- A zipper across the top of the screen that lets you remove the rolled-up mesh for the off-season. The Bug Wall added it to its V2 screens.56
- Half mesh with privacy panel
- A rear screen where the lower half is solid fabric to hide cargo. One maker's version adds an all-weather awning.9
- Chill Curtain
- A clear vinyl or insulated panel that zips into the same frame as a mesh screen for cold or windy weather. The Bug Wall sells one for the ProMaster.29
- Semi-permanent install
- A DIY install meant to stay on the van. You install it once, then roll the mesh up when you don't need it.89
Common problems owners report
These come from owner threads and build write-ups. Most are from ProMaster owners; a couple are from other vans and are flagged, because the mechanism is the same. Some threads compare brands, so the points below describe the problem, not a ranking.
Bottom magnets grab the floor or the door
One ProMaster owner with a slider screen said so many magnets along the bottom grabbed the diamond-plate floor that getting in and out was slow. After taking the bottom magnets out and keeping the corner ones, they called it "so much better."18 Another owner who cut a household magnetic screen to fit said the magnets kept sticking to the sliding door and the screen tore as the door opened.18
What to look for: Ask where the magnets sit, and whether they can be removed. Check what metal sits at the base of your opening.
Unweighted or magnet-only screens blow around
A maker's guide says a screen with magnets only at the seam billows in wind.2 A ProMaster owner expected no-tuck magnetic screens to "fly all over the place in the slightest breeze," while another with side and rear screens said they were fine in a typical breeze but "will not stand up to a big wind."18 A third owner with a slider screen said it never flew open.18
What to look for: A screen that fastens all the way around, or a weighted bottom edge. If you pick removable magnets, expect to put them up each stop.
Pillar trim tugs the bottom corner
A ProMaster owner who installed a clip-in slider screen pulled the seal off all the way to the floor and spent a lot of time adjusting the screen to just touch the floor. They noted the trim at the base of the passenger-side pillar has to come off, and that extra slack is needed there because refitting the trim pulls the screen's lower corner a little.19
What to look for: Leave slack at the bottom corner before you refit trim. Ask the maker how it handles the pillar base.
A plastic piece covers the seal at the slider's forward edge
The Bug Wall's install notes single out ProMaster sliders: the forward edge has a plastic piece over the seal near the bottom of the door. The maker says to remove it if you can and leave extra slack, or loosen its two screws, tuck the screen behind it and retighten.7
What to look for: A maker whose instructions name your van's trim and show what to do with it.
Magnet seams are fussy to tension
The Bug Wall says too much side-to-side tension stops the magnet strip working, and tells installers not to hang the screen "super tight."7 A magazine writer who put one on their ProMaster slider said the magnetic slit snaps back together "sometimes with a bit of fussing to get it perfectly sealed" (a search-result excerpt; the page itself was blocked).22 A one-year review of the same brand on a different van says getting the fabric tight but not too tight "took some tinkering."23
What to look for: Zipper-closure options are less sensitive to tension.7 Ask whether the seam can be re-tensioned after the first weeks.
A cabinet beside the slider leaves no room for a rolled screen
A ProMaster owner with a cabinet about an inch from the closed slider asked whether the door would close on a rolled-up clip-in screen. Another owner said a rolled screen is about 2 in across and compresses to about 1 in, and suggested tacking it up and testing the door before committing.19 (This is from a search-result excerpt of the thread; the full thread was only partly readable.)
What to look for: Measure the gap between the closed slider and your cabinet. Ask the maker about roll-up thickness and return terms.
The slider already takes effort to close
ProMaster owners in a long-running thread say the sliding door can take real force to latch. One suggested the rear edge has little leverage, another said opening a roof vent makes closing "way less effort."20 The thread dates from 2014 and 2015, so treat it as context rather than a current rating. Owners disagree about screens and the door: one says the Bug Wall is designed to let you close the door with the screen down, another says to roll it up every time.24
What to look for: Read the maker's instruction on closing the door with the screen down, and test before you trim.
DIY and cut-to-fit screens take several tries
A ProMaster owner who built a screen said "my fourth one finally got it right," and another said the first three attempts used the wrong fabric.18 A cut-down household screen tucked under the gasket "doesn't always close automatically" and leaves a gap where it overhangs the floor, according to an older DIY write-up.25 Another DIY guide has builders remove the door gasket piece by piece, tuck the screen under it, leave 1 to 2 extra inches and trim afterward.26
What to look for: A ready-made, van-specific screen saves iterations. A DIY screen avoids buying a made screen, but not the time.
Fitment checklist
Work through this before you order anything. The platform details are in the RAM ProMaster fitment guide.
- Confirm it is the full-size ProMaster. The ProMaster City is a different, smaller van; screens for one do not fit the other. See the ProMaster City fitment guide.
- Note your roof height. Ram lists standard, high and super high roofs.34 Makers name them differently, so match by the look and the maker's own description.
- Note your wheelbase. Ram offers three wheelbases and several body lengths.34 One maker lists 118, 136 and 159 for its rear screen and 136 and 159 for its slider.89
- Check your slider. Confirm it is a manual door and whether your van has a second slider on the driver side. No screen page I read says whether its slider screen fits a driver-side slider, so ask.
- Check the cab. Front door nets are built for the cab door windows.101213 If your van is a Crew Van with a rear passenger sliding door and tinted glass, ask whether a cargo-van screen suits it.3
- Check what is on the rear doors. Ladders, racks and tire carriers that bolt to the hinges or door skin share the rear opening with a screen. No maker page I read says whether they interfere with one another, so ask both makers. See the ProMaster rear door racks guide, the ladders guide and the tire carriers guide.
- Check your finish. Wood, trim or insulation covering the door flange blocks clip-in installs. Bare metal is needed for magnets.27
- Standard roof66 in
- High roof77 in
- Super high roof86 in
Ram's published cargo-area heights, 2025 cargo van. Source 3.
| Maker | Roof heights named | Lengths named |
|---|---|---|
| The Bug Wall (slider and rear) | Low, High, Super High56 | Not stated on the page text |
| VanEssential (slider) | High roof8 | 136 and 1598 |
| VanEssential (rear) | High roof, 2014 to current9 | 118, 136 and 1599 |
| VanEssential (bundles) | High roof11 | 136 and 15911 |
| RippleWear (cab, slider, rear) | Not stated141516 | Not stated141516 |
| A-Z Covers (privacy cover for a zipper screen) | High roof17 | Not stated |
Install and long-term ownership

What an install involves
A clip-in install is a DIY job, but not a quick one. Makers and owners describe the same sequence:
- Clean and position. Pull the seal off the top of the opening, clean the flange with alcohol or water, and hang the screen from double-sided tape across the top with half the tape on each side of the flange.7
- Set height and sides. Slider screens have a guide line; rear screens use latch holes or cuts that line up with the rear door latches.7 Hang it about an inch long, because the seal raises it about an inch when refitted.7
- Clip and re-seal. Work down the sides, adding clips and pushing the seal back as you go. Do not hang the screen super tight if it has a magnet strip.7
- Handle the trim. Deal with the forward-edge plastic piece and the pillar-base trim on the slider.719
- Test, then trim. Close the door, check the bottom edge and the cabinet clearance, then trim the excess.727
Allow time for it. One reviewer of a Bug Wall on a different van got the first side-door install in after about an hour, then adjusted it over several weeks.23 A Transit build blog lists four hours and calls the process "iterative," one step forward and two back.27 Some van builders install screens for you, which removes the guesswork.28
Living with it
- Roll it up every time you close the door. Or confirm the maker's guidance on closing with the screen down. Owners disagree, so follow the instructions for your screen.24
- Take the mesh off in the off-season. If your screen has a top zipper, remove the rolled mesh and keep the frame.56
- Check zippers and magnets. Zippers are the most common wear point on a bug screen, according to one maker.2
- Leave winter options open. The Bug Wall makes an insulated or clear Chill Curtain that zips into the same frame.29
- Keep screens and covers separate in your plan. Screens keep insects out; window covers handle privacy and heat. Some cab nets can stay on with the maker's door shades.12
Ask the brand before you order
Ask before you order
- What is the mesh count, or hole size?
- Does this fit my roof height and wheelbase, including a 159 Extended or a super high roof?
- Is the slider screen compatible with my door, manual or powered, and does it fit a driver-side slider?
- How does the screen attach, and what do I need to remove, including the forward-edge piece and the pillar trim?
- What happens at the bottom edge against my floor, and can I remove bottom magnets?
- Can the walk-through seam be offset, and can the screen be flipped later?
- Can I close the door with the screen down, and how thick is the rolled-up bundle?
- Does the rear screen clear a hinge-mounted ladder, rack or tire carrier?
- What are the return and warranty terms on a made-to-order screen?
Examples in the WNDR Built index
These are examples of features, not recommendations. Each links to its WNDR Built listing, which links to the maker's page. Some makers' ProMaster screens are covered on WNDR Built VanWiki pages; see the callouts below.
Example: three roof sizes, magnet or zipper
RAM Promaster Rear Screen (The Bug Wall)
- Low, High and Super High
- Top zipper removes the mesh
Clips under the weather seal, with a foam layer along the bottom and a choice of magnet or zipper closure. A zipper across the top lets you take the rolled screen off in the off-season.5
Example: front door nets that stay with shades
Ram ProMaster Front Door Mosquito Net Set (Vanmade Gear)
- Fits with door shades
- Lifetime warranty
Attaches magnetically to the window frame without rolling the window down, and can stay mounted alongside the maker's front door shades.12
Example: cab nets in dual-layer mesh
CampGuard Bug Nets (The Wanderful)
- 2014 to current ProMaster
- UV-blocking mesh
Dual-layer UV-blocking elastic mesh with rare-earth magnets, sold as a driver and passenger pair with a maximum coverage of 33 in high by 42 in wide.13
Example: privacy cover for a zipper screen
Rear Door Zipper Screen Covers (A-Z Covers)
- ProMaster High Roof option
- Special order, non-returnable
A cover that velcros onto an existing zipper rear screen and adjusts up or down, so you can ventilate at the top and keep privacy below.17
Example: universal no-tuck magnetic slider screen
Universal Van Bug Screen, Sliding Door (Living in a Bubble)
- Multi-van sizing
- Owners split on wind
A center-magnetic screen that does not tuck under the door seal. A ProMaster Forum thread quotes its listing as covering High Roof ProMaster, and owners disagree on how it handles wind.18
Key takeaways
- Match the screen to your roof height, wheelbase and slider type before you compare brands.3589
- Ask for the mesh count; 20x20 or finer is the CDC's line for biting midges.1
- Clip-in screens stay put but take hours; removable magnets are quick but grab metal and blow around.2718
- Plan for the slider's forward-edge piece, pillar-base trim and your cabinet clearance.719
- Check how any screen shares the rear opening with a ladder, rack or tire carrier.
- Use screens for insects and window covers for privacy and heat.
Frequently asked questions
Can I use a Sprinter or Transit screen on a ProMaster?
Makers sell van-specific screens for each platform, and the ProMaster pages name ProMaster roof heights and lengths.5689 A few universal screens list several vans.18 See the Sprinter bug screens guide and the Ford Transit bug screens guide for those vans' options.
Will a screen stop the rear doors from opening?
Ram says the rear doors swing open 260 degrees.3 Screens fasten at the opening, but I found no maker statement about rear doors fitted with hinge-mounted gear, so ask.
Magnet or zipper?
The Bug Wall's advice is magnets for a door you pass through often, such as a slider, and zippers for a rear door that a bed blocks.30 A maker's guide says the best setup has a magnetic seam plus a top zipper to remove the mesh in the off-season.2
Do I have to pull off the weather seal?
For clip-in screens, yes. You tuck the mesh under the seal and refit it.7 Removable magnetic screens don't, but they need exposed metal.2
Will it stop no-see-ums?
It depends on the mesh. The CDC points to 20x20.1 The ProMaster pages I read do not publish a count, so ask the maker.5689
Can I close the door with the screen down?
Owners disagree. One says the Bug Wall is designed for it, another says to roll it up every time.24 Follow the maker's instruction for your screen and test before trimming.
Keep planning your build
- Fitment guide RAM ProMaster fitment guide Roof heights, wheelbases and model-year changes that decide what fits.
- Buyer's guide RAM ProMaster window covers The other half of ventilation and privacy at the same openings.
- Buyer's guide RAM ProMaster rear door racks What shares the rear doors with a screen.
- Buyer's guide RAM ProMaster ladders Hinge-mounted and rack-mounted ladders that can crowd the rear screen.
- Buyer's guide Ford Transit bug screens The Transit version, with roof-height and powered-slider notes.
- Buyer's guide Sprinter bug screens The Sprinter version, with generation and latch differences.
Sources
- CDC — Preventing Oropouche checked Nov 2026
- Sandy Vans — How to Choose a Bug Screen for Your Sprinter Van (maker guide; says it also applies to Transit and ProMaster) checked Nov 2026
- Stellantis Fleet — 2025 Ram ProMaster Cargo Van checked Nov 2026
- PR Newswire — New 2023 Ram ProMaster Unveiled at the Work Truck Week Trade Show checked Oct 2026
- The Bug Wall — RAM Promaster Rear Screen (product page) checked Nov 2026
- The Bug Wall — RAM Promaster Side Sliding Door Insect Screen (product page) checked Nov 2026
- The Bug Wall — Installation Instructions checked Nov 2026
- VanEssential — Ram Promaster Bug Screen, Sliding Door (product page) checked Nov 2026
- VanEssential — Ram Promaster Bug Screen, Rear Door (product page) checked Nov 2026
- VanEssential — Ram Promaster Bug Screen, Front Doors (Pair) (product page) checked Nov 2026
- VanEssential — Ram Promaster Bug Screen Bundle (product page) checked Nov 2026
- Vanmade Gear — Promaster Front Door Mosquito Net (set) checked Nov 2026
- The Wanderful — CampGuard Bug Nets checked Nov 2026
- RippleWear — Ram Promaster Sliding Door Mosquito Screens checked Nov 2026
- RippleWear — Ram Promaster Mosquito Screens, Rear Door checked Nov 2026
- RippleWear — Ram Promaster Front Cab Mosquito Screens checked Nov 2026
- A-Z Covers (Van Upgrades) — Rear Door Zipper Screen Covers checked Nov 2026
- Ram Promaster Forum — Anyone with experience with "living in a bubble" van bug-screen? (owner reports) checked Nov 2026
- Ram Promaster Forum — Will a VanEssential screen work on my build? (owner reports; one post read in full, the rest from a search excerpt) checked Nov 2026
- Ram Promaster Forum — Sliding door hard to shut (2014–2015 owner reports) checked Nov 2026
- Ram Promaster Forum — Sliding screen door (2017 owner reports) checked Nov 2026
- Expedition Portal — The Bug Wall :: Field Tested (page blocked; search excerpt only) checked Nov 2026
- Feed the Habit — The Bug Wall Review: Insect Screens for Camper Vans (search excerpt only; a different van) checked Nov 2026
- Reddit r/VanLife — For those wondering, The Bug Wall is worth the money (owner comments; search excerpt only) checked Nov 2026
- On The Way To Nowhere — DIY magnetic bug screen (owner build write-up; search excerpt only) checked Nov 2026
- Engineers Who Van Life — DIY vs. Professional Bug Screens for Van Life (search excerpt only) checked Nov 2026
- FarOutRide — Mosquito Screen Installation, Ford Transit Van Sliding and Rear Doors (a different van; search excerpt only) checked Nov 2026
- Wayfarer Vans — The Bug Wall, professionally installed (search excerpt only) checked Nov 2026
- The Bug Wall — RAM ProMaster Bug Screen collection (search excerpt only) checked Nov 2026
- The Bug Wall — Home and FAQ (search excerpt only) checked Nov 2026
Fitment and availability change. Confirm with the brand before you buy.
