
White Top Adventures
SPRINTER 144" LOW ROOF STEALTH 2.0 ROOF RACK
Indexed listing. WNDR Built doesn't sell this product; the button opens whitetopadventures.com.
A low-profile platform for rooftop gear
The Stealth 2.0 carries solar panels, gear mounts and cargo on a powder-coated aluminum platform. Its side rails follow the van’s roofline, while movable crossbars let you arrange the rack around your intended rooftop equipment. White Top Adventures describes the 2.0 redesign as a wider, extended platform for solar panels and accessories.
The rack offers smooth and light-bar-compatible front fairing configurations. The light-bar fairing provides a direct mounting location; the maker recommends Baja Designs DUAL Control OnX6+, LED Light Bars (Straight). An integrated bend in the side rail also serves as a grab bar when climbing up. Accessory mounting options include awning brackets, decking panels and solar brackets.
Movable crossbars
Six crossbars can be repositioned to suit your rooftop layout.
Interchangeable front fairings
The design accepts a smooth fairing or a light-bar-compatible fairing.
Accessory interface
White Top Adventures lists compatibility with its F45S Awning Brackets and Solar Panel Mounting Brackets.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by White Top Adventures
2007+ Mercedes-Benz Sprinter 144" Low Roof Vans.
Choose the rack option
The maker’s selector offers these two configurations.
Sprinter 144" Stealth Roof Rack
- Smooth front fairing configuration.
Sprinter 144" Standard Roof Rack w/Light Bar Compatible Fairing
- Front fairing designed for a direct light bar mount.
Low roof only
Not compatible with high roof Sprinters; confirm your roof height before ordering.
Light bar mounting hardware
Follow the light bar manufacturer’s mounting instructions. M6 or M8 rail nuts and a specific screw length may be required for its bracket base; additional hardware may be needed.
Roof-rail mounting
The installation guide mounts the rack to the driver- and passenger-side factory roof rails.
Accessory configurations
For non-standard configurations, White Top Adventures asks buyers to confirm accessory fit by contacting info@whitetopadventures.com.
Installer requirement
White Top Adventures recommends professional installation. If you lack mechanical experience or are unfamiliar with the procedures, the guide requires installation by a qualified professional or someone with the necessary expertise.
Before use
Inspect mounting points and attachments before use, and regularly check for wear or damage.
Specs, parts & installation
Construction & dimensions
| Material & finish | Powder-coated aluminum |
|---|---|
| Rack length | 138" |
| Crossbar width | 60.5" |
| Side rail height | 4.35" |
Maker-listed loads
| Static load | White Top Adventures states 660 lbs, unless otherwise specified by the manufacturer. |
|---|---|
| Dynamic load | White Top Adventures states 330 lbs, unless otherwise specified by the manufacturer. |
What’s in the box
Rails & crossbars
The installation guide lists one driver front rail, one passenger front rail, one driver rear rail, one passenger rear rail, six crossbars and two joint plates.
Fairings & guard
The installation guide lists one standard fairing, one fairing for a light bar and one rubber guard.
Hardware pack
Rail nuts, T blocks, M10 hex-head screws, M8 and M6 button-head screws, flat washers, spring lock washers and M8 nylon lock nuts, as listed in the installation guide.
Installation at a glance
Bolt the rack to the factory roof rails using the rail nuts and supplied mounting hardware. Position the front foot as far forward in the roof rail as it can go.
Set the crossbar positions before final tightening. The guide specifies a 5 mm Allen wrench for crossbar bolts and a 17 mm wrench for the side-rail attachment. Do not overtighten.
Assembly sequence from the guide
- Slide half the rail nuts into each factory roof rail and space them near their final positions.
- Loosely attach the side rails, leaving about an eighth of an inch gap for adjustment; join each side’s front and rear rails with a joint plate.
- Loosely attach the crossbars in the desired locations.
- Center and attach the chosen fairing to its crossbar, then attach the assembly to the side rails; fit the trim to the standard fairing’s bottom edge.
- Tighten crossbar bolts, align the side rails, tighten joint plates, then tighten the rack to the roof rails.
- The guide permits a dab of blue Loctite if concerned about bolts backing out.
Source notes
- White Top Adventures’ product page offers fairing-specific rack options; its linked low-roof installation guide lists both a standard fairing and a light-bar fairing in the package. The included-parts list follows the guide.
- The product page displays different prices in its main and sticky purchase areas; the supplied maker variant selector governs the options and prices.
Lead Time
Free shipping: most continental-US orders on Shipping policy, all lower-48 orders on FAQ, all orders on Homepage banner; remote-location and special-freight fees may apply.
Read White Top Adventures lead time policy on WNDR BuiltWarranty
Read White Top Adventures warranty policy on WNDR BuiltReturns
Returns within 30 days of delivery require unused, uninstalled, unassembled items in original packaging; 15% restocking and customer-paid shipping apply; large freight items have additional fees.
Read White Top Adventures returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon