
White Top Adventures
Promaster High Roof Side Ladder
Indexed listing. WNDR Built doesn't sell this product; the button opens whitetopadventures.com.
Side access to your ProMaster roof
This side ladder gives access to the roof rails or roof rack of a Ram ProMaster. White Top Adventures lists adjusting solar panels, loading gear and checking a rooftop tent among its uses. Its double-kink profile follows the ProMaster's body lines so it sits close to the van.
The aluminum ladder has dimpled steps and a matte black powder coat. It ships in two pieces that slide together, with an upper attachment and a lower mounting plate securing it to the van. White Top's guide illustrates the upper attachment at the roof rack's slotted side rail; the separately stated rail requirements are in Fitment.
Step width
12" wide, dimpled aluminum steps.
Mounting kit
Upper and lower mounting hardware is included; the lower plate requires drilling as described in Fitment.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by White Top Adventures
- 2014+ Ram ProMaster 159" High Roof and 159" Extended High Roof, as White Top states it. White Top's compatibility line reads "2014+ High Roof Ram Promaster Vans with our Roof Rack".
Drilling required
The guide drills four 1/4" holes through the van's pinch weld and uses self-tapping screws up through the lower bracket; see Installation.
Top mount
White Top's FAQ says the ladder mounts to the factory C-channel roof rails and can be installed independently of the roof rack; its ProMaster rack page adds that you need factory or like-factory low-profile C-channel rails on both sides of the van. For third-party ladder racks on the roof, White Top asks owners to contact it before ordering. White Top's guide describes aligning the two holes at the top of the ladder with the two ladder slots on the roof rack.
Installer requirement
White Top recommends a professional installer. If you lack mechanical experience or are unfamiliar with the installation procedures, its guide requires a qualified professional or someone with the necessary expertise.
Before use
White Top's guide requires inspecting mounting points and attachments before use and regularly checking for wear or damage.
Specs, parts & installation
Ladder construction
| Weight | 22.7 lbs, per White Top |
|---|---|
| Material | 1.25" aluminum round tubing |
| Steps | 12" wide, dimpled aluminum |
| Finish | Matte black powder coat |
| Shipping | Ships in two pieces |
Maker load rating
| Static load | 300 lbs per White Top (the page adds "Unless otherwise specified by the manufacturer") |
|---|
What’s in the box
Ladder and mount
Upper ladder section and lower ladder section; lower mounting plate.
Fasteners
M10-40 button head screws ×4, M10 flat washers ×8, M10 nylon lock nuts ×4; M6-20 hex head screws ×4, M6 flat washers ×8, M6 nylon lock nuts ×4; ST5.5-19 self-tapping screws ×4; M6-16 button head screws ×4.
Installation at a glance
White Top describes the install as four steps with basic hand tools.
White Top's ProMaster side ladder guide (undated) needs a drill, a 1/4" drill bit and a pen for marking. The upper attachment is shown at the roof rack's slotted rail; the lower plate attaches through the pinch weld and lower sheet metal.
Assembly and mounting sequence
- Slide the two ladder halves together and tighten four M6-16 button head screws.
- Place the ladder against the side of the roof rack, aligning the two holes at the top with the ladder slots, and loosely fasten it with two M10-40 button head screws, washers and nylon lock nuts, as close to the rear wheel as possible.
- Loosely attach the mount plate to the bottom of the ladder with two M10-40 screws, washers and nylon lock nuts. Check the ladder is vertical, mark the plate holes with a pen and drill 4 holes with a 1/4" bit through the van's pinch weld.
- Fasten the plate through those holes with four M6-20 hex head screws, M6 washers on both sides and nylon lock nuts, then drive four ST5.5 self-tapping screws up through the lower bracket into the lower sheet metal of the van tunnel. Finish by tightening the four M10-40 screws and checking every fastener.
Lead Time
Orders typically ship within 1–2 days unless otherwise specified (shipping policy). White Top Adventures states it does not offer expedited shipping.
This product
White Top's product-page FAQ says in-stock orders ship the same or next business day and arrive in 3–7 business days. It lists UPS/FedEx.
Warranty
Read White Top Adventures warranty policy on WNDR BuiltReturns
White Top accepts returns within 30 days of delivery for items that have not been used, installed or assembled and are in the original packaging, with a 15% restocking fee and customer-paid return shipping; freight return fees also apply to large freight-shipped items.
Read White Top Adventures returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon