
VanMade Gear
Sprinter Ekko - Screen Door
Indexed listing. WNDR Built doesn't sell this product; the button opens vanmadegear.com.
A mesh entry screen with magnetic auto-close
VanMade Gear lists a no-see-um mesh screen door for the Sprinter Ekko, with a magnetic opening edge and auto-close. The screen is intended to keep insects out at the entry, with adhesive Velcro securing it around the inner door frame.
The product design allows you to stow the door out of the way when it's not in use. The installation guide describes unzipping both sides, rolling the screen toward the top and securing it with integrated buckle straps. VanMade Gear says it makes its products in Portland, Oregon.
Door use while fitted
When closed, the screen can remain installed while opening or closing the doors.
Water-repellent materials
VanMade Gear describes the fabrics and materials as water-repellent and ultraviolet-ray-resistant.
Rattle-free design
Designed to be lightweight and rattle-free.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by VanMade Gear
Sprinter Ekko - Screen Door
Original screen and latch removal
The original screen door and latch/lock assembly need to be removed for the product to mount.
Specs, parts & installation
Screen materials
| Mesh | No-see-um screen, per VanMade Gear |
|---|---|
| Fabric | Water-repellent, UV-resistant fabric, per VanMade Gear |
What’s in the box
- Double-sided foam tape, listed as included in the installation guide.
Installation at a glance
No drilling required.
The Sprekko screen door attaches with adhesive Velcro along the inner door frame and uses no-see-um screens.
Clean the full frame perimeter with rubbing alcohol and let it dry completely before applying tape and Velcro. The guide recommends warm conditions when applying tape and Velcro.
Position the bottom edge just touching the floor: it should not drag or leave a large gap. Keep the screen centered and avoid stretching the Velcro.
Regularly check Velcro adhesion and reapply pressure if necessary, especially in high heat or humidity.
Tools listed in the Ekko guide
- 3/32" Allen wrench or hex bit
- #1 square bit driver
- Phillips screwdriver
- Rubbing alcohol and a clean microfiber cloth
- Masking tape and pen/pencil
- Scissors or utility knife
Installation sequence from the guide
- Remove the factory screen door hinge screws, lift off the screen, then remove the latch striker plate and long plastic piece near the handle.
- After cleaning and drying the frame, cut the supplied double-sided foam tape to fit the hinge areas; tape the hinges firmly against the frame to prevent movement.
- Hold up the screen and mark its height and placement. The Velcro on the screen is sewn ½” in from the product edges. Apply the adhesive Velcro across the top and down the sides, pressing firmly along the whole strip.
- Reattach the long plastic piece; the smaller latch plate is no longer needed.
- Align the screen at the bottom Velcro strip, then work up each side. Adjust tension and alignment so the magnets close naturally; test the entry and peel and reposition if necessary.
Lead Time
Approximate lead time is 4 weeks, with free standard shipping within the continental U.S.; email for a quote elsewhere.
This product
VanMade Gear notes that raw-material supply delays may mean this product takes longer to complete and ship than usual.
Warranty
Material and workmanship defects are covered for life; VanMade Gear chooses repair or replacement, and the customer pays shipping both ways.
Read VanMade Gear warranty policy on WNDR BuiltReturns
Approved returns within 60 days of delivery; custom work and warned-against fitment purchases excluded; customers pay shipping unless VanMade error; damaged products risk fees or rejection.
Read VanMade Gear returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon