
A-Z Covers
Promaster Van Insect Screen Rear Cargo Doors - Zipper
Indexed listing. WNDR Built doesn't sell this product; the button opens a-zcovers.com.
Zipper access through a screened rear opening
This rear-door insect screen uses a zipper opening for access into and out of a Ram Promaster. It is built for the van rather than sold as a generic-fitting screen, and the rear doors can close with the screen installed.
Standard Screen is the seller’s high-airflow mesh option. No-see-um Screen is offered for the smallest insects, giving a choice of mesh without changing the zippered opening.
Adjustable bottom edge
The bottom sweep adjusts with Velcro.
Seasonal removal
The screen can be removed and stored for seasonal use.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by A-Z Covers
Ram Promaster rear cargo doors · 2014 and up · High Roof or Low Roof.
Choose the mesh
Both meshes are offered in High Roof and Low Roof versions.
Standard Screen
- High-airflow screen mesh.
No-see-um Screen
- Mesh for the smallest insects.
Cutting may be required
The linked guide says some rear screens need holes cut for door latches and stops after fitting. Hook-tape corners also need cuts to lie flat.
California warning
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Installer recommendation
The linked A-Z Covers guide recommends a reputable independent auto body or installation shop if you are not comfortable working on the vehicle body and door gaskets.
Specs, parts & installation
Manufacture
| Made by | A-Z Covers LLC |
|---|---|
| Country of manufacture | USA |
What’s in the box
Screen & instructions
Selected rear cargo-door screen and installation instructions.
Installation at a glance
The linked A-Z Covers guide says a screen should be installed in an hour.
Remove the factory door gasket, clean its flange, attach the loop and hook Velcro, reinstall the gasket over the tape, then attach the screen and align its sweep to the floor.
The guide says the Dodge Promaster rear-screen striker plate does not need to be removed to remove the gasket. Instructions and technical support are provided.
Installation sequence in the linked guide
- Remove the factory door gasket from the floor on one side to the floor on the other side.
- Clean the inside of the gasket flange with rubbing alcohol or adhesive remover.
- Apply the ½” adhesive-backed loop Velcro to the inside of the flange and press firmly.
- Attach the 2” hook Velcro to the loop tape; the guide specifies 3” for passenger-van sliding doors only and 2” for all rear doors.
- Reinstall the gasket over both pieces of Velcro, keeping the hook flap inside the van and taking care not to separate the tapes.
- Starting at the top corners, attach the screen to the hook flap and align the sweep to the floor.
Lead Time
Items ship as available; manufacturing or shipping delays may occur; customers pay applicable fees and duties.
This product
The product page states this special-order item takes 2-4 days to have ready.
Warranty
Manufacturer warranties only; seller disclaims its own warranty.
This product
The product page states a one-year manufacturer's warranty against manufacturer's defects.
Returns
30-day returns for unused, originally packaged items; sale items and overseas orders excluded; 25% restocking fee may apply; cancellations incur 12%.
This product
The product page states this special-order item is non-returnable.
What are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon