
Van Cafe
RTD Side Ladder: Ram ProMaster
Indexed listing. WNDR Built doesn't sell this product; the button opens vancafe.com.
Side access to the Rooftop Deck
Van Cafe’s RTD Side Ladder provides side access to its Rooftop Deck system. The ladder uses three-section aluminum side rails and formed steps; the hollow side rail can also serve as a conduit for wiring.
The ladder connects to the rack at the top and to pinch-weld brackets at the bottom. This mounting arrangement lets the installation position be adjusted along the supported part of the van’s side.
Step construction
The steps are laser cut, bent and formed on a CNC press brake. Van Cafe describes the ladder as TIG-welded and jig-manufactured.
Logo step placement
The manual lets you choose where to place the VAN CAFE logo step during assembly.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Van Cafe
RAM ProMaster high roof. The exact installation manual lists 2014–2022: 136-inch, 159-inch and 159-inch extended high-roof configurations.
High-roof version only
Van Cafe identifies this version for high-roof vans; the product page lists low- and mid-roof versions as coming soon.
Rocker drain plugs
Depending on position, rocker drain plugs may need to be removed.
Required rack interface
Designed to attach to Van Cafe’s ProMaster Rooftop Deck; the rack is a separate product.
Mounting location
The manual places the ladder behind the front door and ahead of the rear wheel.
Specs, parts & installation
Rails & dimensions
| Side rails | 6063 aluminum tubing. |
|---|---|
| Step width | 15 inches. |
| Total ladder width | 18 inches. |
| Weight | 26lbs. |
What’s in the box
Rails & steps
Six side-rail sections, seven steps (one logo step and six regular steps) and four ladder bungs.
Mounting parts
Two outside pinch-weld brackets, two inside pinch-weld brackets, two push-in grommets and two 3in T-Nuts.
Fasteners
M6 and M8 screws, washers and Nyloc nuts listed in the official manual.
Installation at a glance
Van Cafe specifies no-drill attachment to the Rooftop Deck and the van’s pinch weld.
Assemble the rail sections and steps, position the lower brackets, install the upper T-nuts in the rack, then align and tighten the ladder. Follow the exact manual’s fastener positions and inch-pound torque specifications; the published procedure is linked below.
Assembly & alignment sequence
- Join the rail sections with the bungs and M6 screws with wavy washers; keep VAN CAFE on the bungs upright and leave the screws loose until alignment.
- Assemble the steps face down with M6 screws, lock nuts and washers; engage the Nyloc nuts without final tightening until the ladder is on the van.
- Insert grommets in the outer brackets and loosely assemble the inside and outside pinch-weld brackets.
- Position the bottom brackets 16.5” apart center-to-center or about 12” apart at the ends.
- Install the 3” T-Nuts in the rack with the inside screws 13.5” apart; hang the ladder with washers outside and fit the outer screws, leaving the assembly able to slide in the perimeter track.
- Connect the lower rail brackets to the bottom brackets with M8 screws, small washers on both sides and Nyloc nuts in all four holes.
- Center the brackets, align the steps with the van’s horizontal body-lines and tighten the rail bungs, steps, upper bracket and bottom bracket to the manual’s inch-pound values.
Tools listed in the manual
- 6mm, 5mm and 4mm Allen wrenches
- 13mm and 10mm wrenches
- Rubber mallet
- 1/4in torque wrench (inch pounds)
- Tape measure
- Step ladder
Lead Time
Same-day dispatch before 3:00 pm MST is attempted, not guaranteed; declining Route means no Van Cafe refund or replacement for loss, theft or damage after dispatch.
Read Van Cafe lead time policy on WNDR BuiltWarranty
Read Van Cafe warranty policy on WNDR BuiltReturns
Eligible items: return within 30 days; restocking fees and exclusions apply.
Read Van Cafe returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon