
Vanspeed
Transit Scout Rack 148
Indexed listing. WNDR Built doesn't sell this product; the button opens thevanmart.com.
A roof rack with crossbars you can reposition
The Transit Scout Rack 148 creates a modular platform for roof-mounted storage and accessories. A multi-piece aluminum outer frame surrounds extruded crossbars that can use standard spacing or be repositioned around roof-mounted features such as a vent fan or AC unit.
The frame provides L-track tie-down locations and mounting slots for lighting, while the crossbars accept T-slot hardware for accessory mounting. Fiamma awning adapter plates are part of the rack kit, giving the assembly a separate mounting provision for an awning.
Black-finished aluminum
The outer frame has a textured black powder-coat finish; the machined aluminum crossbars are black anodized.
Front and rear lighting provisions
The front offers mounting surface for a light bar up to 52”; two rear-facing slots are intended for Baja Designs RTL series chase lights.
California manufacture
CNC cut, bent and welded; manufactured in Huntington Beach, CA.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Vanspeed
2015+ Ford Transit 148 (High Roof).
Possible roof-hole trimming
The guide uses existing OEM threaded roof inserts. If an insert is not concentric with the plug-cover opening, it instructs using a die grinder or metal rasp to remove excess material so the mounting bolt has a clear path.
Accessories sold separately
Third-party components such as lights, decking and solar equipment are sold separately, as is accessory T-slot mounting hardware.
Accessory interfaces
Crossbars accept ¼”-20 T-slot hardware. The three included adapter plates are designed for a Fiamma F45S awning.
Roof layout
Pre-measure mounting locations and confirm clearance for other installed build components. The crossbars can be reconfigured around roof-mounted features.
Specs, parts & installation
Frame & crossbars
| Outer frame | 5052 Aluminum with textured black powder coat |
|---|---|
| Crossbars | Machined aluminum extrusions with black anodization |
| Crossbar length | 60”L, as listed in the maker guide |
Mounting provisions
| L-track locations | 16 |
|---|---|
| Aftermarket lighting slots | 41 |
| Rear-facing chase-light slots | 2 for Baja Designs RTL series |
| Front light-bar mounting surface | Up to 52” |
| Accessory hardware interface | ¼”-20 T-slot hardware |
| Awning interface | 3 adapter plates for Fiamma F45S |
What’s in the box
Outer frame
Front and rear left/right side rails, left/right end plates, two coupler plates, rear crossmember, front crossmember and front crossmember brace.
Crossbars & awning plates
Six aluminum extruded crossbars and three Fiamma awning adapter plates.
Sealing & hardware
Butyl tape roll and all hardware necessary for assembly and installation.
Installation at a glance
Mounts to OEM threaded inserts beneath the roof plug covers.
Seal around each mounting hole with the included butyl tape, assemble the frame and crossbars, then align the rack and tighten the hardware. The maker recommends an additional ladder and help from a friend.
Required tools listed by the maker
- Socket Wrench with 13mm Socket
- 5/32” Hex Drive Bit / Socket
- 7/16” Wrench
- Ladder
- Pry Tool or Putty Knife for roof plug covers
- Scissors for butyl tape
Recommended equipment
- Additional ladder and help from a friend
- Blue Threadlocker
- Standard Allen Key Set if you do not own hex drive bits / sockets
Assembly sequence from the maker guide
- Remove the eight roof plug covers to expose the OEM threaded mounting inserts.
- Cut and place butyl tape around the underside of the mounting feet so each mounting hole is sealed.
- Install driver- and passenger-side rails with M8 bolts, lock washers and neoprene sealing washers; the guide calls for blue threadlocker on these bolts.
- Connect the front and rear side rails with coupler plates and fit the crossbars.
- Assemble the rear and front crossmembers with their crossbars, end plates and front brace, then attach them to the side rails.
- Position the rack to avoid interference along the roofline and tighten the hardware from the inside outward.
Optional Fiamma awning installation
- For a passenger-side Fiamma awning, mount one adapter plate near the rear, one near the center and one near the front.
- Refer to the Fiamma awning instructions for the rest of the installation.
Lead Time
The Shipping policy lists order processing within 2 to 4 business days; shipping time varies with inventory and backorders.
Read Vanspeed lead time policy on WNDR BuiltWarranty
Read Vanspeed warranty policy on WNDR BuiltReturns
Returns within 30 days of purchase carry a 20% restocking fee; the Refund policy waives it for gift-card refunds.
Read Vanspeed returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon