
Transit Offroad
Ford Transit Heavy Duty Rear Bumper - By Transit Offroad
Indexed listing. WNDR Built doesn't sell this product; the button opens transitoffroad.com.
A receiver integrated for rear clearance
Transit Offroad’s HD Rear Bumper is intended for drivers seeking more clearance under the back of a Ford Transit on technical terrain. The receiver is integrated directly into the bumper; Transit Offroad states this arrangement gains an extra 4″ to 5″ of clearance under the rear bumper.
The design pairs that integrated hitch with a non-slip textured powder-coated surface.
Trailer connector cut-out
A cut-out accommodates a 7 pin RV-style trailer connector.
Sensor and light cut-outs
The bumper has cut-outs for factory sensors and Baja Designs S2 & S2 Pro Lights.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Transit Offroad
Ford Transit.
Lights sold separately
Baja Designs S2 & S2 Pro Lights are sold separately.
Coating use limit
Transit Offroad states the texture powder coating is not designed for extreme conditions such as those where heavy road salt is used.
Factory hardware reuse
Retain the factory bumper bolts and end-cap push-clips for reuse, as directed by the installation guide.
Specs, parts & installation
Hitch and finish
| Receiver | Transit Offroad lists an integrated 2″ Class 4 Receiver Hitch. |
|---|---|
| Finish | Non-slip texture powder coating |
Maker-listed size and weight
| Weight | 110 lbs |
|---|---|
| Dimensions | 65 × 26 × 7 in |
What’s in the box
- HD rear bumper
- Mounting hardware
Installation at a glance
Transit Offroad describes bolt-on installation with no modifying; the guide recommends a helper when removing the stock bumper.
Remove and reinstall the spare tire, rear-door bottom weather seal and bumper end-cap push-clips.
Disconnect and reinstall back-up sensors if the van has them.
Refasten all 12 stock bolts using red loctite® and add the 4 lock-nuts to the horizontal bolts closest to the front of the van.
Sequence from the HD Bumper Installation guide
- Remove the spare tire to access the bolts connecting the bumper to the Transit.
- Remove the weather seal at the bottom of the rear doors and the small screws holding the plastic cover on top of the stock bumper.
- Remove and retain the end-cap push-clips; disconnect back-up sensors if fitted.
- With a helper recommended for this section, remove and retain all 12 stock bumper bolts, then pull the stock bumper rearward off the Transit.
- Slide the new HD bumper straight forward into position.
- Refasten all 12 stock bolts using red loctite® and fit the 4 additional lock-nuts on the horizontal bolts closest to the front of the van.
- Reinstall back-up sensors if fitted, the weather seal, the bumper end-cap push-clips and the spare tire.
Lead Time
Ford Transit Heavy Duty Rear Bumper and Ford Transit Front Bumper list current lead times of 1–2 weeks; shipping charges and transit times are unstated.
This product
Transit Offroad’s product page states a current lead time of 1-2 weeks.
Warranty
The Universal Folding Hitch Mounted Step lists a lifetime warranty; detailed conditions and rear-bumper coverage are not stated.
Read Transit Offroad warranty policy on WNDR BuiltReturns
Complete, uninstalled, unmodified returns within 30 days of receipt; buyer pays return shipping; 30–90-day returns have fees, with seller-fault label exceptions; none after 90 days.
Read Transit Offroad returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon