
The BugWall
Coahman NOVA and Similar Ram Promaster Sliding Door Insect Bug Screen
Indexed listing. WNDR Built doesn't sell this product; the button opens thebugwall.com.
A roll-away replacement for the factory sliding screen
The BugWall lists a side sliding door insect screen made as a replacement for the factory sliding screen in the Coachman NOVA and similar Class B RVs built on the Ram Promaster. No-See-Um bug netting on marine canvas.
The screen can cover the doorway when insect protection is needed and roll out of the way when it is not. Zipper across the top lets you remove the rolled-up screen for seasons when insect protection is not required (listed as new for Bug Wall V2). Closure choice: magnetic closure for walking in and out, or a zipper in the center.
Side zippers and buckle straps
Zippers on both sides let the screen roll up; rolled flaps are secured with built-in buckle straps.
Weighted lower edge
The BugWall says foam along the bottom adds weight for a better roll-up; this is listed as new for Bug Wall V2.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by The BugWall
- Coachman NOVA or similar Class B RVs built on the Ram Promaster High roof.
- Side sliding door.
Choose the opening type
The maker offers these two closure types.
Magnet
- Magnetic closure for walking in and out.
Zipper
- Zipper in the center.
Trim before closing the sliding door
Do not close the sliding door with excess screen fabric still untrimmed; the guide warns it could get caught.
Magnetic-screen tension
For the Magnet version, too much side-to-side tension prevents the magnet strip from operating correctly; do not install the screen too tight.
Weather-seal and floor clearance
Keep the left zipper clear of the left weather seal. At the top, center the screen between the seal’s left-side bump-out and the right edge of the door, not the very top of the opening. The side-screen guideline sets the screen just past the step/floor; do not install lower than this line. Raise the screen if you want it to scrape or sit just above the floor.
ProMaster lower trim
At the forward edge, the guide recommends removing the plastic piece over the lower seal if possible, leaving extra fabric slack for refitting it. Alternatively, loosen the 2 screws, tuck the screen behind the plastic and retighten.
Trapped weather seal
If the weather seal is trapped behind something and cannot be removed, follow the linked guide’s trapped-seal video.
Roof height
High (Most Class B RVs) is the only roof-height option.
Opening location
FRONT- Opening closer to the front of the door opening- as pictured is the only location offered. The maker recommends it for the Coachman: about 14" from the forward edge of the door opening, reaching the highest point where your head is when exiting.
Rear screens
Rear screens are sold separately. The page says all Ram Promaster rear screens fit the Coachman NOVA or similar Class B vans on the Ram Promaster chassis, and to select High Roof.
Available combinations
- High (Most Class B RVs) + FRONT- Opening closer to the front of the door opening- as pictured + Magnet
- High (Most Class B RVs) + FRONT- Opening closer to the front of the door opening- as pictured + Zipper
Specs, parts & installation
Screen construction
| Materials | US made marine canvas with No-See-Um bug netting and USA made marine grade zippers. The BugWall states the screen is UV stable. |
|---|---|
| Made in | The BugWall states it manufactures its screens in Conway, SC. |
Opening location
| Front entry | About 14" from the forward edge of the door opening. |
|---|
What’s in the box
Screen and straps
Side sliding door insect screen with built-in buckle straps for securing rolled-up flaps.
Installation supplies
Roll of double-sided tape and mounting clips, as stated in the brand-wide installation guide.
Other included item
Bugwall coozie, as stated in the brand-wide installation guide.
Installation at a glance
Mount with double-sided tape, clips and the van’s weather seal, then trim excess fabric.
Follow the updated written instructions; the older videos are a visual guide only. Follow any supplemental instructions supplied with the package as well.
Align the side-screen guideline with the upper flange edge to set the height; for older or rare models without a line, the guide says to hang the screen about an inch too long before wrapping the fabric and fitting clips.
Before reinstalling the weather seal, pinch it back shut; seat it fully around the corners.
Mounting sequence from the maker
- Mark the weather seal and van so the seal can return to its original position; remove the seal across the top of the opening.
- Clean the flange with alcohol or wipe it with water. Apply double-sided tape across the top and around both corners, half on the front and half on the back of the flange, then remove the red cover.
- Position the screen using the tape. Wrap the fabric around the flange with enough room behind the corners for the weather seal to go back fully into place.
- Use the thick clips across the top. Install one in the center and one towards each side, then check the length before adding more: clips are difficult to remove. The guide says the weather seal and side work will lift the screen about another 1/4" or so.
- If the length is correct, install a clip about every 6-8" across the top. Add clips around the corners, including just below the corner and in the turn.
- Work down the sides, using clips that fit the metal thickness and keeping the zippers straight. The guide suggests relief cuts in the fabric at the left-edge bump-out.
- Once satisfied with the position, trim excess fabric; the guide recommends scissors rather than a razor. Pinch the weather seal shut, reinstall it at the reference marks and use a mallet to seat it fully, especially around the corners.
Lead Time
Lead times vary; contact the maker. Product banner: about 1 week to shipment for new orders; international taxes, fees, duties and tariffs are the buyer’s responsibility.
This product
The maker’s product-page banner estimates 1 week until shipment from its shop for new orders due to high demand.
Warranty
Read The BugWall warranty policy on WNDR BuiltReturns
Returns within 30 days; later returns incur a 25% fee and are not accepted after 90 days.
Read The BugWall returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon