
Tec Vanlife
Tec Vanlife Ford Transit Modular Aluminum Roof Rack
Indexed listing. WNDR Built doesn't sell this product; the button opens tecvanlife.com.
A roof layout that can move with your equipment
The Tec Vanlife Transit modular rack provides a platform for solar panels, cargo and other rooftop equipment. Its crossbars can be repositioned around roof fans, skylights and rooftop air conditioners, so the layout can be planned around the equipment in a van conversion.
Extruded aluminum side rails have double-thick corners for mounting awnings with the appropriate brackets. A gap between the front fairing and van body is designed to let air pass beneath the rack and solar panels. The rack also works with Tec Vanlife’s modular decking system to create designated walk-on areas.
Movable crossbars
Reposition the crossbars to accommodate solar panels, cargo boxes, fans, skylights and rooftop air conditioners.
Decking choices
Tec Vanlife’s modular walk-on panels support L-Track or conventional bolt configurations.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Tec Vanlife
- Ford Transit 130 Mid Roof
- Ford Transit 148 Mid Roof
- Ford Transit 148 High Roof
- Ford Transit 148 EXT High Roof
Roof-load limits
Never exceed Ford’s specified dynamic or stationary roof-load limit. Include the rack, decking and every installed accessory in the total roof load; use all available attachment points on the van roof.
Walk-on areas require decking
Fit Tec Vanlife’s modular decking to create designated walk-on areas. Do not walk directly on unsupported crossbars, solar panels or other roof accessories.
Mounting-hole clearance
Drilling through the roof is not normally required, but the installation guide warns that factory inconsistencies may require grinding clearance on the van’s mounting holes to access the threaded holes. Some accessories may require holes in the rack’s aluminum components.
148 EXT weight
Confirm the final rack specification for the 148 EXT configuration before ordering.
Choose the matching configuration
Select the wheelbase and roof height that match your van. The current rack configurations are not intended for Low Roof models.
Factory mounting points
Vehicle-specific brackets attach to the factory roof-mounting locations; the mounting arrangement depends on the selected wheelbase and roof height.
Equipment and accessory checks
Confirm solar-panel dimensions, wiring routes and clearances. Tec Vanlife’s solar-panel brackets are for compatible 1.5-inch roof-rack crossbars. Confirm the roof opening, airflow, service access and clearances for roof fans, skylights and air conditioners. Compatible Fiamma and Thule awnings require appropriate brackets and hardware; confirm the awning length and bracket configuration before ordering. Cargo-box mounting hardware must fit the rack.
Hardware inspection
Inspect and retighten all hardware after the first 160 km or 100 miles, then every 1,000 km or 600 miles or monthly, whichever occurs first. Check again after rough-road travel or if movement, vibration or unusual noise develops. If unsure, send rack plans or photos to info@tecvanlife.com for evaluation before final installation or use. The van owner and/or installer assumes the risks associated with rooftop-mounted items and components.
Specs, parts & installation
Construction
| Side rails | Extruded aluminum with double-thick corners |
|---|---|
| Rail profile height | 5" (128mm) |
| Crossbar length | 52.95" (1345mm) |
Approximate rack weight
| Transit 130 | 25.4 kg or 56 lb |
|---|---|
| Transit 148 | 32.6 kg or 72 lb |
148 High Roof, non-extended only
| Overall rack dimensions | 3,080 mm long × 1,595 mm wide (approximately 121.3 × 62.8 inches) |
|---|
What’s in the box
Rack assembly
Aluminum side rails, modular crossbars and a front wind fairing.
Mounting parts
Vehicle-specific mounting components and required rack-assembly hardware.
Accessories excluded
Decking, awning brackets, solar brackets, cargo boxes and other accessories are not included unless specifically stated in the selected package.
Installation at a glance
The installation guide recommends professional installation.
Remove the factory roof-mounting-point caps, bolt the mounting tabs into the roof mounting holes, then assemble the side rails, front fairing and crossbars.
The guide recommends sealant between the tabs and roof and Loctite on the mounting screws; apply sealant around the mounting-tab bolts at the end.
Tools listed in the installation guide
- Allen key and metric wrenches
- Flat screwdrivers or chisel
- Water-resistant caulk or sealants
- Loctite is recommended
Lead Time
Delivery estimates depend on product availability, handling, destination and carrier service; shipping rates and methods are calculated at checkout.
This product
Tec Vanlife’s product page lists complimentary shipping to the U.S. Lower 48 and Canada. For backordered Canadian configurations it estimates dispatch on November 22, 2026, not guaranteed delivery; in-stock configurations and in-stock U.S. orders are not subject to this preorder date.
Warranty
Read Tec Vanlife warranty policy on WNDR BuiltReturns
Approved returns of unused items in original packaging must be initiated within 30 days of receipt, with a 15% restocking fee and buyer-paid return shipping; sale items and gift cards are excluded, and pre-shipment refunds incur a 6% transaction fee.
Read Tec Vanlife returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon