
Sandy Vans
Sprinter Van Slider Door Bug Screen — Clearance Sale (2007–2024 Side Magnet)
Indexed listing. WNDR Built doesn't sell this product; the button opens sandyvans.com.
A side-closing screen for the slider opening
This previous-generation slider screen uses transparent micro-mesh as a barrier against insects while keeping the view through the open door. Its Side Magnet closure puts the magnetic seam toward the edge of the opening, allowing one large panel to swing clear as you pass through.
The screen mounts with metal clips beneath the factory weather seal rather than magnets attached to the van body. It stays mounted between stops and rolls up with buckles when you want the opening clear. This clearance listing is the mechanical-handle version, not the current handle-adaptable screen.
Two clip sizes
The mounting clips accommodate single-layer and two-layer metal around the door opening.
Side Magnet configuration
This back-stock listing is Side Magnet only; Middle Magnet is offered on the current screen listing.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Sandy Vans
Mercedes-Benz Sprinter 2007–2024 High Roof, slider door with standard mechanical handle.
Excluded vans and handles
Not compatible with Low Roof Sprinters, non-Sprinter vans, or 2025+ Sprinters with the electric slider door handle. This version does not include the Velcro patch accommodation for that electric handle.
Access and trimming required
The clips need access to the metal lip beneath the factory weather seal; check whether finished interior panels cover it. Installation requires cutting excess mesh flush behind the clips. Mesh extending past the weather seal can wick water into the van.
Cannot zip off completely
Sandy Vans’ FAQ says the screens have no zipper across the top: they roll up and buckle in place, but full removal requires uninstalling them.
Sprinter-platform builds
Sandy Vans also lists these Sprinter-platform RV and upfitter builds: Winnebago Revel; Storyteller Overland (MODE, Beast Mode); Outside Van; Airstream Interstate & Atlas; Grech RV (Strada, Turismo, Terreno); Pleasure-Way Plateau; Leisure Travel Vans (Unity, Wonder); Coachmen Galleria; Midwest Automotive Designs; Jayco Terrain; Tiffin Wayfarer; Thor Tranquility. The maker says fitment depends on the exact model, year, suspension lift and body kit, and requires confirmation with its team before ordering.
Layout choice
The maker recommends Side Magnet when a counter, fridge or cabinet occupies one side of the slider opening.
Specs, parts & installation
Screen construction
| Screen dimensions | 64" × 78" (before cutting) |
|---|---|
| Material | Transparent micro-mesh |
| Closure | Magnetic (Side Magnet) |
What’s in the box
Screen
1× Sliding Door Bug Screen (64" × 78").
Mounting items
4× Clamps and 25× Metal Clips in two sizes. The installation unboxing step also lists pry tools.
Installation at a glance
Sandy Vans lists 2 to 3 hours. No drilling or permanent modifications to the van are required; the screen is trimmed to fit.
Metal clips secure the screen to the metal flange under the factory weather seal. Leave slack for the magnets to meet and keep the bottom about 1 inch above the fiberglass factory step.
Sandy Vans offers paid installation at its San Diego facility.
Installation sequence
- Pull the weather seal off the top and sides of the slider opening; the bottom can stay on.
- Hang the screen with the Sandy Vans logo facing out and clamp the two top corners.
- Keep the bottom about 1 inch above the fiberglass factory step, level side to side, with slack on both sides for the magnets to meet.
- Clip the top about every 4 to 6 inches, with three clips around each curved corner; then clip down the sides, keeping slack in the middle.
- Add extra wide clips at the corners and front edge. Use thinner clips for single-layer frame metal and wider clips for two-layer sections.
- Open and close the door to check that the magnets meet. Trim excess screen right behind the clips.
- Reinstall the weather seal from the bottom up, pulling it straight and tapping it in with the rubber mallet.
Tools listed by Sandy Vans
- Scissors
- Rubber mallet
- Clamps (included)
- Small step ladder
Lead Time
Shipping typically takes 5–7 business days; free shipping on Sandy Vans-fulfilled products.
Read Sandy Vans lead time policy on WNDR BuiltWarranty
Direct-fulfilled products cover material or workmanship defects under normal use; partner products follow the manufacturer’s warranty.
Read Sandy Vans warranty policy on WNDR BuiltReturns
Direct-fulfilled items: 30 days from delivery, uninstalled and undamaged; 20% restocking fee and customer-paid return shipping.
Read Sandy Vans returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon