
Rover Vans
2025 Design Rover Vans Tire Carrier & Ladder Combo for Ford Transit
Indexed listing. WNDR Built doesn't sell this product; the button opens rovervans.com.
Carry the spare outside and climb past it
The Rover Vans Transit Tire Carrier & Ladder combines an exterior full-size spare-tire mount with access to the roof rack and rooftop gear. Moving the spare outside leaves that space available inside the van, while the integrated ladder keeps roof access on the same rear-door assembly.
The system mounts using the factory rear-door hinges. Integrated foot pegs and ladder spacing provide room for boots when climbing around the tire. Rover describes the tire access as tool-free and says the design is intended to avoid parking-sensor interference.
Aluminum carrier
The carrier and ladder use powder-coated aluminum construction.
Coated hardware
Rover specifies automotive-grade, OEM-quality fasteners and mounting components with protective anti-corrosion coatings.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Rover Vans
Ford Transit (2015+).
Choose your wheel configuration
Select the maker’s wheel option to match your wheel configuration.
AWD Stock Wheels
- Stock AWD wheels.
2WD Stock Wheels
- Stock 2WD wheels.
Aftermarket Wheels
- Aftermarket wheels.
Identify your rear-door hinges
Each wheel option is offered with both hinge options. Rover identifies hinge type by the number of pins.
Hinges 180
- 180° hinge: single pin.
Hinges 270
- 270° hinge: double pin.
Drilled third mount — 180° guide
The linked 180°-hinge guide requires a third mounting point drilled through the door. Protect the drilled hole with an anti-corrosion agent.
Door-limiter warning — 180° guide
If the upper foot is installed and the door limiter has been removed, the guide warns the foot may hit the light when the door is fully opened. It recommends retaining the limiter or, if necessary, removing the upper foot and fitting it only when required.
Door attachment
Rover says the 2025 design installs onto the factory hinges without removing or realigning the rear door.
Specs, parts & installation
Carrier structure
| Material | Powder-coated aluminum |
|---|---|
| Weight | 19lbs, as listed in Rover Vans’ comparison table |
What’s in the box
Carrier & ladder
Combined tire carrier and ladder with integrated foot pegs.
180°-hinge mounting parts
The 180° guide identifies kit-supplied mounting plates and bolts, including M8x25 and M8x35 bolts.
Installation at a glance
The linked product-page PDF is specifically for 180° hinges.
It calls for removal of the interior rear-door trim, installation of upper and lower hinge brackets and a drilled third mount. Prepare each bracket with its mounting plate before fitting; the guide says the plate cannot be inserted afterward without removing the bracket.
180°-hinge assembly details
- The guide recommends threadlocker before tightening hinge bolts.
- Fit the wheel support and set stud height by measuring from the wheel’s edge to its center, then transferring that measurement from the wheel support to the stud position.
- Secure the wheel with the rubber cone and wing nut; fit the bolt caps and aluminum feet.
Lead Time
Rover Vans’ FAQ says in-stock orders dispatch immediately; out-of-stock lead time is approximately 7 working days.
Read Rover Vans lead time policy on WNDR BuiltWarranty
Rover Vans’ FAQ says guarantee details depend on the type of product ordered.
This product
Rover Vans’ product page states a 5-year product warranty and a 10-year no-fade finish warranty.
Returns
The refund policy allows return requests within 30 days of receipt; the FAQ specifies a 20% restocking fee.
Read Rover Vans returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon