
RB Components
07 + Sprinter Van Fabric - Low Roof Passenger Side Sliding Door Bug Net
Indexed listing. WNDR Built doesn't sell this product; the button opens rbcomponents.com.
A screened sliding doorway
Leave the sliding doorway open with a mesh screen across the opening. RB Components describes this bug net as a way to let fresh air into the van while keeping insects out. Its zip-in screen sits in a fabric frame, and the product page points to the zipper as the way to enter and leave.
The linked sliding-door guide also describes a magnetic center pass-through and a screen that can be rolled up for loading. Those give you different ways to use the doorway without removing the whole fabric frame each time.
Door use
The linked sliding-door manual says the door closes with the net installed.
Seal-mounted frame
The fabric frame tucks behind the sliding door's rubber seal, with no drilling needed.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by RB Components
2007+ Mercedes-Benz Sprinter; low roof; passenger-side sliding door.
Screen adjustment
If the magnetic center does not close on its own, the sliding-door manual says the screen is too tight; adjust the frame so it hangs loose enough for the magnets to meet.
Specs, parts & installation
Screen & construction
| Material | Mesh screen with fabric frame |
|---|---|
| Origin | Made in the U.S.A. (manufacturer statement) |
What’s in the box
Screen & frame
Sliding-door bug net with outer frame and zip-in screen ×1
Installation clips
Fabric locking clips ×5 (Sprinter column of the linked manual)
Installation at a glance
RB Components estimates about 20–30 minutes with two people for the Sprinter.
The manufacturer's October 5, 2026 sliding-door manual describes tucking the fabric frame behind the rubber door seal, then zipping the screen into the frame. No drilling or tools are needed for the Sprinter. Separate the screen from the frame first and start with only the top of the seal peeled back. The product page says no screws are necessary.
Sliding-door frame installation
- Read every step before beginning. Unzip the screen from the outer frame and set the screen aside.
- Peel back only the top of the rubber seal first. Center the frame with its corners evenly spaced and its zippers facing the inside of the van; hold the top with the fabric locking clips.
- Starting on the right side, tuck about 3/4"–1" of frame fabric between the seal and van body, and press the seal into place. Work right to left across the top.
- With the top in place, tuck the right side behind the seal. Work down the left side in 12" sections.
- Zip the screen to the top of the frame first, then zip both sides.
Lead Time
Freight rates are fixed at checkout on the homepage; Terms of Sale allow adjustment at shipment; signature and damage-reporting conditions apply.
Read RB Components lead time policy on WNDR BuiltWarranty
Read RB Components warranty policy on WNDR BuiltReturns
Unused returns within 30 days of purchase; 10% restocking and customer-paid shipping; postmark within 30 days after approval; cancellation fees and refunds vary by page.
Read RB Components returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon