
Living in a Bubble
Ford Transit Window Cover - Rear Door Windows (Pair)
Indexed listing. WNDR Built doesn't sell this product; the button opens livinginabubble.co.
Insulated blackout covers for the rear windows
This pair covers the rear door windows for privacy and insulation. Living in a Bubble states the covers block out 100% of light and help keep the van cool in summer and warm in winter. Their construction combines recycled PET fabric, ripstop polyester and double faced aluminium crosslinked PE foam insulation.
Sewn-in rare earth magnets hold the covers at the window frame. The Full Metal Door version attaches to metal; the Full Plastic Door version uses metal tabs with 3M adhesive to provide attachment points for the magnets.
Foldaway storage
Folds up for storage when not in use.
Two-sided finish
Light Grey inside face and Black outside face.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Living in a Bubble
Ford Transit · 2015-Current · Mid & High Roof
Choose the rear door type
Choose the version matching your rear-door trim.
Full Metal Door
- For full metal rear doors only.
- The maker says these covers only work with Bare Metal or Factory Window.
- Maker-listed conversion vans: Thor Talavera, Thor Palladium and Wayfarer (full metal rear door).
Full Plastic Door
- For full plastic rear doors only.
- Installation uses metal tabs with 3M adhesive.
- Maker-listed conversion vans: Coachmen Beyond and Pleasure Way Ontour (full plastic rear door).
Excluded Transit models
Not compatible with Ford Transit Low/ Standard Roof Van, Ford Transit Connect or Ford Transit Custom.
No made-to-order alterations
The maker says its covers are made for specific van models, cannot be altered and are not made to order.
Adhesive tab curing for full plastic doors
Do not touch the adhesive side or remove or stress the tabs during curing. The maker states 50% strength in 20 minutes, 90% in 24 hours, and full strength in 72 hours.
Available combinations
2015-Current / Mid & High Roof / Full Metal Door; 2015-Current / Mid & High Roof / Full Plastic Door.
Window position
Rear door windows (pair).
Conversion vans requiring maker contact
Contact Living in a Bubble first for El Kapitan, Embassy RV Traveler, Embassy RV Cape Cod, Vanworks, Tourig or Vancraft.
Specs, parts & installation
Materials & finish
| Material | Recycled PET fabric (maker: yarn extracted from recycled mineral water and Coke bottles), UV50+ ripstop polyester, double faced aluminium crosslinked PE foam insulation and rare earth magnets |
|---|---|
| Colors | Light Grey (internal) and Black (external) |
What’s in the box
Window covers
Rear door window covers, sold as a pair.
Full Plastic Door preparation
The Full Plastic Door instructions identify a provided alcohol pad.
Installation at a glance
No drilling or suction cups are required; Full Plastic Door installation also requires adhesive metal tabs.
Full Metal Door: place the black side against the glass, let the magnets latch to the metal sides of the frame, and align all edges.
Full Plastic Door: clean the glass nearest the plastic frame with the provided alcohol pad; locate and adhere the tabs to match the cover magnets, then attach the cover. Follow the adhesive curing caution above.
Full Metal Door sequence
- With the black side against the glass, place the cover on the rear door window so the magnets latch to the metal sides of the window frame.
- Ensure all edges are securely aligned on the window.
Full Plastic Door sequence
- Align the metal tabs with the cover magnets, with the 3M adhesive side facing outward.
- Clean the glass around the window frame using the provided alcohol pad, focusing on the glass closest to the plastic frame.
- Hold the cover against the window and mark or note the tab locations so the built-in magnets sit against the glass near the plastic frame.
- Remove the tape backing and attach the tabs at the identified locations, repeating for all magnet positions.
- Carefully attach the cover to the frame.
Source notes
- Living in a Bubble's embedded product FAQ says its covers fit only Sprinters (2007-Current) and Crafters (2006-2016), but its dedicated compatibility FAQ includes Ford Transit (2015 to current model), and this product's compatibility section specifies Ford Transit 2015-Current, Mid and High Roof vans; this listing follows the dedicated FAQ and product-specific fitment.
- Living in a Bubble's feature text describes installation as fully magnetic; its Full Plastic Rear Door installation guide also requires metal tabs with 3M adhesive, as described in this listing.
Lead Time
US standard postage is free over $50 except Alaska/Hawaii; US/Australian handling normally takes 1–3 business days, with extra Black Friday processing days possible.
Read Living in a Bubble lead time policy on WNDR BuiltWarranty
12-month warranty; selected products qualify for 2 years with QR registration upon receipt.
Read Living in a Bubble warranty policy on WNDR BuiltReturns
Unused change-of-mind returns within 30 calendar days after delivery require original packaging; initial postage and a 10% restocking fee are deducted.
Read Living in a Bubble returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon