
Flatline Van Co.
Winnebago Ekko Rear Bumper, Ladder, & Carrier Swing-Out System
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
Build a rear storage and spare-tire system
Build a rear storage arrangement from a replacement bumper, a swing-out platform, a spare-tire carrier and a rear ladder. Flatline Van Co. offers seven configurations, ranging from individual components to the complete system; the option selector identifies which parts each configuration contains.
The platform swings on a roller-bearing pivot to leave the rear storage door reachable, then closes with a machined cam latch. Its panel can carry a storage box or other gear when no tire carrier is fitted. The tire-carrier component secures the spare with a lockable tire screw and a rubber wheel wedge.
The bumper combines an aluminum skin with steel mounting brackets and step supports. A lowered step serves rear-ladder access, while light pockets and a license-plate bracket are built into the bumper. The one-piece ladder replaces the factory ladder.
Exterior finish
The components have a black exterior-grade UV powder coat and stainless steel hardware.
Auxiliary lighting
The bumper has built-in mounting for Baja Designs S2 auxiliary lights.
Rear mounting space
Cutouts in the ladder leave extra rear mounting space.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
- 2025+ Winnebago Ekko Sprinter (23B)
- 2021+ Winnebago Ekko Transit (22A)
Choose the system components
Select one of Flatline’s seven configurations. Contents depend on the configuration selected.
Rear Bumper + Platform + Tire Carrier + Ladder
- Rear bumper
- Swing-out rear platform
- Tire carrier
- Rear ladder
Rear Bumper + Platform + Tire Carrier
- Rear bumper
- Swing-out rear platform
- Tire carrier
Platform + Tire Carrier (Bumper Required)
- Swing-out rear platform
- Tire carrier
- Requires the rear bumper
Ladder
- Rear ladder
- Installs independently
Rear Bumper
- Rear bumper
- Installs independently
Platform (Bumper Required)
- Swing-out rear platform
- Requires the rear bumper
Tire Carrier (Bumper & Platform Required)
- Tire carrier
- Requires the rear bumper and platform
Required companion components
The rear bumper is required to install the swing-out rear platform, and the platform is required to install the tire carrier. The ladder installs independently and does not connect to the bumper or platform.
Drilling, wiring and interior access
Flatline says the bumper mounts to existing holes with brackets to the subframe and that some drilling is required. Its guides call for opening four factory rear frame holes to 39/64 in, replacing the two forward-most factory hitch-receiver bolts, drilling two holes in the rear body wall for the platform’s upper pivot, drilling the license plate bracket for the LED light, and drilling the roof and rear wall for the ladder. The platform guide also has you temporarily remove part of the interior plastic mattress support and work from the rear garage space. The bumper guide also requires migrating the factory license plate light wiring to the new LED plate light. The ladder requires sealing the drilled and open factory holes.
Before using the ladder
For configurations with the ladder, do not place a load on it or climb until the sealant has fully cured according to the sealant manufacturer’s instructions.
Lights sold separately
Baja Designs S2 light pods fit the bumper pockets but are not included.
California Proposition 65
Flatline warns that this product can expose you to lead and lead compounds, DEHP and bisphenol A (BPA), which California identifies as causing cancer and birth defects or other reproductive harm.
Tire size
The tire carrier fits tires up to 35” x 12.5”.
Installer requirement
Flatline recommends professional installation generally. If you have no mechanical experience and are not thoroughly familiar with the installation procedures, a professional installer or other qualified person must install the product.
Before use
Check mounting points and attachments before use, and regularly inspect the product for wear or damage, as required by Flatline’s guides.
Specs, parts & installation
Construction & finish
| Materials | Aluminum construction apart from steel parts: steel mounting brackets and step support on the bumper, steel pivots with roller bearings on the platform, and a CNC-machined aluminum and stainless cam latch. Stainless steel hardware on all components. |
|---|---|
| Finish | Exterior-grade UV powder coat, black |
What’s in the box
Bumper configurations
Bumper skin assembly, side brackets, pivot plates, license plate bracket and light-pocket cover plates, when the bumper is selected.
Platform configurations
Swing-out platform with cam latch and gas strut, with pivot assemblies, bearing hardware and backer plates, when the platform is selected.
Tire-carrier configurations
Tire carrier, lockable tire screw and rubber wheel wedge, when the tire carrier is selected.
Ladder configurations
Ladder weldment, eight ladder tube spacers and two backing plates, with ladder mounting hardware, when the ladder is selected.
Mounting hardware
Mounting hardware, tube spacers, backer plates and threadlocker per the installation guides for the selected components.
Installation at a glance
Flatline publishes separate guides for the bumper, the platform and tire carrier, and the ladder, each listing about 2 hours; it states no total time for the full system.
The bumper guide removes the factory bumper, opens the factory frame holes and bolts brackets and a pivot plate to the hitch-receiver locations and rear wall. The platform guide requires the bumper to be installed first, packs the pivot bearings with waterproof grease, drills the rear wall with sealant, and bolts a backer plate inside the garage space. The tire carrier is an optional final step. The ladder guide removes the factory ladder and roof sealant, then rivets the ladder to the roof, screws it to the rear wall and bolts the lowest holes through to a backing plate inside, with a second person needed for the interior step.
Additional platform installation details
- The upper pivot requires two rear body-wall holes finished with a 39/64” drill bit, tube spacers and exterior sealant.
- The inside upper pivot backer also requires marking and drilling its lower holes with a 13/64” drill bit, with help for fastening. Reinstall the mattress support, modifying it as needed.
- Pack the roller bearings with waterproof wheel-bearing grease and grease the tire center support’s internal threads.
- Install the cotter pin through the pivot nut, bend its legs back and fit the dust cap.
Lead Time
Flatline Van Co. says in-stock items ship within 1–2 business days from its Arizona warehouse. Items sent by LTL freight typically take 7–21 business days to arrive. Its FAQ says shipping is free to the lower 48; its Shipping policy lists flat-rate shipping and possible free economy shipping with longer lead times.
Read Flatline Van Co. lead time policy on WNDR BuiltWarranty
One-year limited warranty from the original purchase date for the original purchaser, covering product cost only. It excludes installation, labor and freight, and damage from racing, competition or trail use, and is void for alteration, modification or improper installation.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Returns are accepted within 30 days of receipt with a pre-authorized RMA number, for unused items in resalable condition and original packaging. A 20% restocking fee applies, and the customer pays return shipping unless the return is due to Flatline’s error; LTL freight returns must be coordinated with Flatline. Clearance, garage-sale and final-sale items are not returnable, and custom or made-to-order items may also be non-returnable.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Owner reports
Quotes from owners and installers, with links to where they were posted. These are owner reports, not manufacturer-confirmed information, and may describe a different van or year than yours. Verify before you buy.
We are so happy with the quality and detail of it! It makes such a difference and the craftsmanship is unbelievable!
View originalSearches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon