
Flatline Van Co.
Sprinter Van Rear Plate Step
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
A rear step that leaves the hitch accessible
The Rear Plate Step adds a platform for stepping into the back of the van while leaving access to the rear hitch. Its brackets attach to the sides of the factory tow hitch, keeping the hitch itself available for use.
An aluminum plate forms the stepping surface, with dimples for traction and stainless steel brackets beneath it. The brackets also provide mounting positions for recovery shackles, bringing stepping and shackle attachment into the same rear assembly.
Dimpled aluminum plate
Formed dimples in the aluminum stepping surface provide traction.
Shackle mounting positions
The brackets have bosses for 3/4-inch recovery shackles with a 7/8-inch pin.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
Fits Sprinter VS30 · 1500/2500/3500/3500XD as applicable · 144 / 170 / 170 EXT · Low/High Roof · with the factory tow hitch; dually vans excluded.
Factory tow-hitch mounting
Fits vans with the factory tow hitch; the brackets mount directly to its sides.
No dually vans
Flatline states that the Rear Plate Step is not compatible with dually vans.
Installer requirement
Flatline’s installation guide says that if you have no mechanical experience and are not thoroughly familiar with the installation procedures, you must have the product installed by a professional installer or other qualified persons.
Factory sensors
Flatline states that the step works with all OEM sensors.
Shackle fit
The installation guide specifies 3/4-inch recovery shackles with a 7/8-inch pin.
Specs, parts & installation
Step & mounting
| Step | Aluminum with dimpled traction plate |
|---|---|
| Mounting brackets | Stainless steel in the description; DETAILS list 1/4 in steel brackets |
| Added weight | Flatline lists 12.5 lb |
| Hardware | Flatline’s DETAILS list Grade 10 stainless steel hardware |
| Recovery shackle fit | 3/4 in recovery shackles with a 7/8 in pin |
What’s in the box
Step & brackets
One rear plate step, one driver-side bracket weldment and one passenger-side bracket weldment.
Mounting hardware
Mounting screws, nylon insert locknuts, flat washers and carriage bolts.
Installation at a glance
Flatline’s feature block says installation takes about 15 minutes; its description says under an hour.
The stainless steel brackets mount directly to the sides of the factory tow hitch.
If the van has a factory step on the side of the tow hitch, remove it before proceeding.
You may need to clip the zip tie holding trailer wiring through a mounting hole and relocate the wiring.
Use the outward set of mounting holes with a factory bumper and the inward set when installing alongside an FVC Rear Bumper.
Lead Time
In-stock dispatch: 1–2 business days; LTL delivery: typically 7–21 business days; preferred service uses flat rates; economy may be free with longer lead times.
This product
Flatline’s product page says in-stock products ship the following business day.
Warranty
Flatline-made products have a one-year limited warranty for the original purchaser; purchaser-paid claim returns and exclusions apply; other manufacturers’ products carry only their applicable manufacturer warranties.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Returns within 30 days of receipt require RMA, unused original-packaged items and 20% restocking; customer-paid shipping unless Flatline error; clearance/garage-sale/final-sale excluded; identified custom/made-to-order exclusions may apply.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon