
Flatline Van Co.
Sprinter Van Side Steps
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
Side entry steps with room for a ladder
These Sprinter side steps provide entry platforms alongside the van, including stock and lifted vehicles. The driver-side traction step stops short of the rear wheel arch to leave space for a side ladder, while the longer passenger-side tread is designed to pair with Flatline's Step Extension.
Flatline uses square and round steel tubing with dimpled tread plates and a powder-coated finish. The steps sit high and close to the van body.
Dimpled traction surfaces
Dimpled tread plates sit within the step hoops to provide traction.
Two-piece side assemblies
Bayonets and joining brackets connect the front and rear step weldments.
Bracket mounting
Standard Sprinter versions use hangar brackets and underbody braces; the Revel version mounts through its existing Revel brackets.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
- 2007+ Sprinter 1500/2500/3500/3500XD | 144"/170"/170" EXT | Low/High Roof
- Winnebago Revel option
Choose your van version
Flatline offers three versions with different mounting arrangements.
Sprinter 144"
- For the 144" Sprinter; uses hangar brackets and underbody braces.
Sprinter 170"
- For the 170" Sprinter; uses hangar brackets and underbody braces.
Winnebago Revel
- Direct mounting to existing Revel mount brackets; the guide reuses factory carriage bolts, washers and Nylock nuts.
E-Sprinter exclusion
Not compatible with E-Sprinter.
Drilling — standard Sprinter versions
The 144" and 170" guides require drilling and rivet nuts for the underbody braces, plus drilling/self-tapping screws for the pinch-seam hangar brackets; the listed drill bits are 3/16" and 17/32", and the rivet nut tool requires a 3/8-16 mandrel. Lifting the step assemblies into position requires a helper or floor jack.
Undercarriage interference and bracket trimming
Passenger vans with rear heat/AC may require modifications; Flatline asks buyers to message it for details. The 144" and 170" guides also cover cargo vans with undercarriage accessories: dry-fit before drilling because heaters, A/C units, water tanks or other components may interfere. Trim only the hangar brackets if needed, without compromising their mounting holes.
Auxiliary heater lines and the D1 brace
The standard Sprinter guides say fixed auxiliary heater lines can prevent fitting the D1 brace. If the lines cannot safely be moved, omit that brace: Flatline says the step remains safe for its intended use as a step, with a minor reduction in stiffness. Alternatively, rerouting the lines requires specialized knowledge and tools; the guides warn of pressurized fluid and/or fuel lines and highly recommend a certified technician.
Revel factory brackets and sealing
The Revel version requires its existing mount brackets and factory carriage bolts, washers and Nylock nuts. Its guide requires plugging the stock-Sprinter mounting holes in the step weldments with the supplied screws and bonded sealing washers.
California Proposition 65 warning
Flatline warns this product can expose you to Carbon Black & Titanium Dioxide, known to California to cause cancer.
Ladder and step-extension compatibility
Flatline lists its Apex, Wheel Wrap and Standard Side Ladder as compatible without modifications, and says the passenger step is designed to pair with its Step Extension.
Standard Sprinter layout reference
For 2019+ VS30 vans, the guides use the front jack point as the layout reference. For 2007-2018 NCV3 vans, they use the body seam where the front door meets the front wheel-well panel and add an inch to the guide's listed layout dimensions.
Installer requirement
Flatline recommends professional installation for aftermarket accessories; if you have no mechanical experience and are not thoroughly familiar with the procedures, a professional installer or other qualified person must install the product.
Before use
Flatline requires checking mounting points and attachments before use and regularly inspecting the product for wear or damage.
Specs, parts & installation
Construction and tread dimensions
| Tubing | 2" x 2" square tube and 1.75" steel round tube |
|---|---|
| Finish | Powder-coated steel |
| Driver-side traction step | 33.5" long, as stated on the product page |
| Passenger-side traction step | 53.5" long, as stated on the product page |
What’s in the box
Step assemblies — all versions
One front and one rear passenger step weldment; one front and one rear driver step weldment; two bayonets and two joining brackets.
Sprinter 144" mounting parts
Five short hangar brackets, two tall hangar brackets, one D1 brace, two D2 braces, one P1 brace, two P2 braces, seven double bracket spacers and six single bracket spacers.
Sprinter 170" mounting parts
Five short hangar brackets, three tall hangar brackets, one D1 brace, two D2 braces, one P1 brace, two P2 braces, eight double bracket spacers and six single bracket spacers.
Winnebago Revel mounting part
The Revel guide's package list specifies one Revel side step bracket.
Hardware by version
All versions list flanged hex-head screws, button-head screws, bonded sealing washers, 1/4 flat washers and 1/4 nylon locknuts. The 144" and 170" versions also list drilling screws and six 3/8-16 heavy-duty rivet nuts; the 170" and Revel hardware lists each include one threadlocker bottle.
Installation at a glance
The guides list 2 HOURS for the Sprinter 144" and 170" versions, and 1 HOUR for Winnebago Revel; all suggest additional help for a few steps.
The standard Sprinter guides offer a step-assembly-first mounting method and a measured bracket-layout method.
Both standard Sprinter guides require sealing unused bottom mounting holes in the weldments with screws, bonded sealing washers and Loctite.
For Revel, assemble the steps, fit the supplied bracket to the existing factory brackets and secure the steps; its guide specifies 20ft-lbs for the 3/8" screws.
Standard Sprinter tools listed in the guides
- Impact driver, drill and 3/8" driver bit
- 3/16" and 17/32" drill bits
- 7/32" and 5/32" Allen keys
- Rivet nut tool with 3/8-16 mandrel
- 9/16" and 7/16" sockets, ratchet, blue Loctite, tape measure and marker
- The installation steps also call for a 3/4" wrench/socket and an extension; the assembly-first method uses masking tape.
Revel tools listed in the guide
- 9/16" deep-well socket or wrench, Loctite and 5/32" Allen wrench
- The sealing step also calls for a 7/32" Allen wrench; the assembly step uses a ratchet.
If hangar-bracket trimming is required — standard Sprinter only
- The service bulletin lists an angle grinder with metal cutoff wheel, bench vise, safety glasses and gloves, and metal file.
- Mark the interference and cut line, secure the bracket in a vise, remove only the needed material, smooth the cut edges and dry-fit again before continuing.
Standard Sprinter mounting sequence
- Join the front and rear step sections with bayonets and joining brackets.
- Seal the unused weldment mounting holes and fit the spacers, brackets and braces in the locations shown for the selected version.
- Fit the assemblies to the van, secure the braces and hangar brackets by the chosen guide method, align the steps and tighten the fasteners.
- Join the two halves of the passenger tread plate with the specified button-head screws, washers and locknuts.
Lead Time
In-stock dispatch: 1–2 business days; LTL delivery: typically 7–21 business days; preferred service uses flat rates; economy may be free with longer lead times.
Read Flatline Van Co. lead time policy on WNDR BuiltWarranty
Flatline-made products have a one-year limited warranty for the original purchaser; purchaser-paid claim returns and exclusions apply; other manufacturers’ products carry only their applicable manufacturer warranties.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Returns within 30 days of receipt require RMA, unused original-packaged items and 20% restocking; customer-paid shipping unless Flatline error; clearance/garage-sale/final-sale excluded; identified custom/made-to-order exclusions may apply.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon