
Backland Expedition Gear
APEX - Side Steps - 170 - Drop Down - Aluminum
Indexed listing. WNDR Built doesn't sell this product; the button opens backlandgear.com.
Drop-down access with a body-following aluminum platform
These APEX aluminum steps add a wide, flat foothold along the van for entry and exit, particularly when the van is parked for camping. Their shape follows the rocker panels and covers the pinch seam, while Backland describes the INDY-coated surface as nonslip even in snowy conditions.
The aluminum construction is offered as a lower-weight alternative to the steel APEX Rock Sliders. Backland describes the steps as reinforced to bear the van’s weight and protect the pinch seam during lifting; the same platform can serve as the first step for the IBEX side ladder.
Stainless steel mounting brackets
Backland specifies stainless steel brackets for resistance to rust and corrosion.
INDY stepping surface
The steps use polyurea-based INDY Protective Coating, which Backland describes as nonslip and rust-resistant.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Backland Expedition Gear
- Mercedes Sprinter · 170 in wheelbase
Drilling required
Backland states installation does not use factory holes; its linked V1 guide calls for six 1/4 in pinch-seam holes per side on a 170 van and additional rivnut holes in the rocker panels and steps.
Tank interference
If a water or fuel tank may interfere with installation, contact Backland for custom brackets.
Ladder and drain configurations
These steps work with Backland’s IBEX side ladder as its first step; Backland offers a compact variant for pinch-seam-mounted ladders or black/gray water-tank drains.
Protection alternative
Backland points to steel APEX Rock Sliders for greater impact protection.
Specs, parts & installation
Step construction
| Material | Aluminum |
|---|---|
| Mounting brackets | Stainless steel |
| Finish | INDY Protective Coating |
| Step position | 9 in below the interior step |
| Weight | 95 lb |
What’s in the box
Step pair
1 set of side steps: 2 side steps.
Mounting hardware
All necessary hardware, including bolts.
Instructions
Installation instructions.
Installation at a glance
Backland’s linked V1 guide uses two floor jacks to hold the steps in position.
The brackets attach using M10 rivnuts, bolts and washers, with their locations chosen around the van’s fitted equipment.
Backland offers installation as an add-on; its staff contacts customers about timing.
Sequence in Backland’s linked V1 guide
- The linked V1 guide calls for 6 evenly spaced 1/4 in holes per side for a 170-wheelbase van, in the middle of the pinch seam at the chosen mounting location.
- Apply silicone, seam sealer, gasket maker or a similar product around the drilled pinch-seam holes.
- Use 2 floor jacks to hold the steps in position, centered between the front and rear of the van.
- Fasten from behind with the supplied metal screws and washers; the guide recommends a 1/8 in pilot hole to guide the screws.
- Locate the Front/Rear/Driver/Passenger brackets around the van’s fitted equipment and mark the M10 rivnut positions on the rocker panels and steps.
- Drill and install the M10 rivnuts without damaging the exterior rocker panels, then fasten the brackets with M10 bolts and washers; the guide recommends spray-on rustproofing on the self-tapping screws.
Lead Time
Backland’s Shipping policy treats shipping and delivery dates as estimates only; for oversized freight, the customer must provide suitable access and unloading arrangements and pay delivery services or fees not expressly included in the quote.
This product
Backland’s product-page description says shipping within 3–5 business days, while its stock notice estimates 3–7 business days; delivery times are not guaranteed. The page lists Canada-only shipping and asks U.S. customers to contact Backland for installation options.
Warranty
Read Backland Expedition Gear warranty policy on WNDR BuiltReturns
Request returns within 10 calendar days of delivery and obtain written approval; eligible items must be unused, uninstalled, undamaged, clean and complete in original packaging, with a 5% restocking fee unless Backland erred and customer-paid return shipping unless Backland erred or approves otherwise in writing; custom, special-order, made-to-order, finished-to-order and final-sale items are non-returnable without written approval.
Read Backland Expedition Gear returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon