
Backland Expedition Gear
APEX - Side Steps - 170 - Drop Down - Shorter Driver Side - Aluminum
Indexed listing. WNDR Built doesn't sell this product; the button opens backlandgear.com.
Drop-down access with a shorter driver-side step
This APEX aluminum set provides a full-length passenger-side step and a shorter step on the driver’s side. The steps follow the curves of the rocker panels and use an INDY-coated surface that Backland describes as nonslip and resistant to stone chips and wear.
The shorter driver-side layout is intended to make room for existing ladder or tank-drain setups while retaining a lower foothold for van entry. Backland describes the construction as covering the pinch seam and providing reinforced support for jacking and maintenance; it directs buyers wanting greater impact resistance to the steel version.
Stainless steel mounting brackets
Backland specifies stainless steel brackets for resistance to rust and corrosion.
INDY stepping surface
The steps use INDY Protective Coating; Backland describes it as nonslip and resistant to rust and wear.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Backland Expedition Gear
- Mercedes Sprinter · 170 in wheelbase · 2007–current
Drilling required
Backland states installation does not use factory holes; its linked V1 guide calls for six 1/4 in pinch-seam holes per side on a 170 van and additional rivnut holes in the rocker panels and steps.
Tank interference
If a water or fuel tank may interfere with installation, contact Backland for custom brackets.
Short driver-side configuration
Full-length passenger side and shorter driver side, intended for builds with pinch-seam-mounted side ladders or gray/black water-tank setups and tank drains.
More ground clearance
Backland points to its Regular Side Step option for more clearance.
Specs, parts & installation
Step construction
| Material | Aluminum |
|---|---|
| Mounting brackets | Stainless steel |
| Finish | INDY Protective Coating |
| Step position | 9 in below the interior step |
| Weight | 70 lb |
What’s in the box
Step pair
1 set of side steps: 2 side steps.
Mounting components
All necessary hardware and mounting brackets.
Installation at a glance
Backland’s linked V1 guide uses two floor jacks to hold the steps in position.
The brackets attach using M10 rivnuts, bolts and washers, with their locations chosen around the van’s fitted equipment.
Backland offers installation as an add-on; its staff contacts customers about timing.
Sequence in Backland’s linked V1 guide
- The linked V1 guide calls for 6 evenly spaced 1/4 in holes per side for a 170-wheelbase van, in the middle of the pinch seam at the chosen mounting location.
- Apply silicone, seam sealer, gasket maker or a similar product around the drilled pinch-seam holes.
- Use 2 floor jacks to hold the steps in position, centered between the front and rear of the van.
- Fasten from behind with the supplied metal screws and washers; the guide recommends a 1/8 in pilot hole to guide the screws.
- Locate the Front/Rear/Driver/Passenger brackets around the van’s fitted equipment and mark the M10 rivnut positions on the rocker panels and steps.
- Drill and install the M10 rivnuts without damaging the exterior rocker panels, then fasten the brackets with M10 bolts and washers; the guide recommends spray-on rustproofing on the self-tapping screws.
Lead Time
Backland’s Shipping policy treats shipping and delivery dates as estimates only; for oversized freight, the customer must provide suitable access and unloading arrangements and pay delivery services or fees not expressly included in the quote.
This product
Backland’s product page estimates shipping within 3–7 business days, with delivery times not guaranteed, and states that this item ships to Canada and the USA.
Warranty
Read Backland Expedition Gear warranty policy on WNDR BuiltReturns
Request returns within 10 calendar days of delivery and obtain written approval; eligible items must be unused, uninstalled, undamaged, clean and complete in original packaging, with a 5% restocking fee unless Backland erred and customer-paid return shipping unless Backland erred or approves otherwise in writing; custom, special-order, made-to-order, finished-to-order and final-sale items are non-returnable without written approval.
Read Backland Expedition Gear returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon