
Aluminess
Touring Roof Rack - Sprinter - 2007-26 Sprinter
Indexed listing. WNDR Built doesn't sell this product; the button opens aluminess.com.
A lowered front loop for forward-facing lights
The Touring Roof Rack pairs a lowered front bar for forward-facing lights with raised rails along the passenger side, driver side and rear. The front lighting position sits below the raised loops used to secure cargo around the rest of the rack, giving lighting and gear different mounting arrangements.
Aluminess custom-builds the rack to accommodate the van’s specific vent and roof layout. Its mounting feet attach to a factory or aftermarket roof-track system using threaded inserts, with the supplied mounting hardware varying according to the number of feet.
Aluminum pipe frame
The rack is built from 1" aluminum pipe (1.315" Outside Diameter).
Two flooring types
Aluminess offers Slats or Perforated flooring for each of the listed high-roof rack configurations.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Aluminess
- 2007-2026 Mercedes-Benz Sprinter · High Roof; choose the wheelbase and body option below.
- 2010-2026 Mercedes-Benz Sprinter 2500 and 3500
- 2018-2026 Mercedes-Benz Sprinter 3500XD
- 2019-2025 Mercedes-Benz Sprinter 1500 and 4500
Choose the wheelbase and body
Both flooring types are offered for every listed roof option.
144" High Roof
- Slats or Perforated flooring
170" High Roof
- Slats or Perforated flooring
170" Extended Body High Roof
- Slats or Perforated flooring
Choose the flooring
The maker lists two flooring types.
Slats
- Slatted flooring
Perforated
- Perforated flooring
Aftermarket vehicle conversions
Aluminess states all its products are designed to fit factory manufactured vehicles and that some aftermarket vehicle conversions are incompatible with Aluminess products.
Satellite antenna interference
Roof racks and roof-rack accessories may interfere with factory roof-mounted satellite antennas; antenna relocation may be required for full satellite radio functionality.
California warning
Aluminess’s product page carries the California warning: “Cancer and Reproductive Harm - www.P65Warnings.ca.gov.”
Roof mounting
Stock or aftermarket roof rails are required on all Sprinter models.
Vehicle load limit
The installation instructions require referring to the vehicle manufacturer’s recommended maximum weight rating before operating the vehicle.
Use and legal compliance
Aluminess states its products are designed for off-road vehicle use and may exceed the vehicle’s factory-designed capabilities. It does not guarantee compliance with local vehicle laws; purchasers must establish suitability and legal compliance before use.
Forward-facing light bar
Aluminess lists compatibility with a light bar up to 40".
Specs, parts & installation
Frame and flooring
| Frame | 1" aluminum pipe (1.315" Outside Diameter) |
|---|---|
| Flooring options | Slats; Perforated |
Shipping dimensions & weight
| Height | 68 IN. |
|---|---|
| Width | 150 IN. |
| Depth | 16 IN. |
| Shipping weight | 250 LBS. |
What’s in the box
Touring rack
Roof rack in the selected Slats or Perforated flooring configuration, with a lowered front loop and raised side and rear rails.
Roof-track hardware
The installation sheet lists stainless-steel fender washers, stainless-steel Nylock nuts, threaded inserts and one 2g anti-seize packet; quantities depend on whether the rack has 6, 8 or 10 mounting feet.
Supplemental hardware
The guide says some rack sizes may include an additional bag labelled “SUPPLEMENTAL KIT” for remaining mounting feet.
Installation at a glance
The installation sheet requires two people and pre-installed factory or aftermarket roof tracks.
Slide the threaded inserts into the tracks from the rear, lower the rack with studs aligned to its mounting feet, then position the rack.
Apply anti-seize to the threaded inserts and secure the washers and Nylock nuts using only 6 ft-lbs. of torque.
Required tools: standard wrench set and leveling tool.
Hardware quantities by mounting-foot count
- 6 mounting feet: 12 fender washers, 12 Nylock nuts and 6 threaded inserts.
- 8 mounting feet: 16 fender washers, 16 Nylock nuts and 8 threaded inserts.
- 10 mounting feet: 20 fender washers, 20 Nylock nuts and 10 threaded inserts.
- If hardware runs out before all mounting feet are secured, check the original packaging for the supplemental kit described in the guide.
Lead Time
Read Aluminess lead time policy on WNDR BuiltWarranty
This product
Aluminess’s installation sheet states that threaded inserts are not covered under warranty.
Returns
This product
Aluminess’s Refund Policy considers all roof racks special orders, nonrefundable unless a new buyer is found.
What are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon