
Aluminess
Explorer Roof Rack - Sprinter - 2007-26 Sprinter
Indexed listing. WNDR Built doesn't sell this product; the button opens aluminess.com.
An arced rack with lighting beneath the floor
The Explorer Roof Rack places its forward-facing lights underneath an arced front section, leaving continuous perforated flooring above them. The rack has slightly recessed upper rungs that follow the Sprinter’s body lines, and its front mounting tabs are offered for either a curved OnX6 light bar or Linkable lights.
Aluminess also offers lighting provisions beneath the rack at the sides and rear. Integrated wire chasing routes wiring inside the rack and out above the B-pillar instead of using external zip ties, combining the lighting layout with internal wire routing.
Load lights beneath an awning
Aluminess states that optional passenger-side load lights remain functional with an expanded awning because they sit below it.
Vent cut-outs
Standard vent cut-outs are included; non-standard and off-center-line vent cut-outs are available upon inquiry.
Wall-mounted awning brackets
Optional awning brackets accommodate a Fiamma F45 or similar wall-mounted awning.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Aluminess
- 2007-2026 Mercedes-Benz Sprinter · High Roof; choose the wheelbase and body option below.
- 2010-2026 Mercedes-Benz Sprinter 2500 and 3500
- 2018-2026 Mercedes-Benz Sprinter 3500XD
- 2019-2025 Mercedes-Benz Sprinter 1500 and 4500
Choose the wheelbase and body
Both front-light mounting options are offered for every listed roof configuration.
144" High Roof
- OnX 50" ARC tabs or Linkable XL tabs; lights not included
170" High Roof
- OnX 50" ARC tabs or Linkable XL tabs; lights not included
170" Extended Body High Roof
- OnX 50" ARC tabs or Linkable XL tabs; lights not included
Choose the front-light mounting tabs
Select the tab option matching the planned lighting; lights are sold separately.
Mounting Tabs for Baja Design OnX 50" ARC lightbar (lights NOT incl.)
- The description specifies a Baja Designs OnX6 50" curved light bar.
Mounting Tabs for Baja Design Linkable XL lightbar (lights NOT incl.)
- The description specifies Baja Designs Linkable lights.
Optional load-light positions
Aluminess offers load-light provisions for Baja Designs S2 lights below the rack; lights are sold separately.
Passenger side
- Optional load-light provision
Rear
- Optional load-light provision
Driver side
- Optional load-light provision
Aftermarket vehicle conversions
Aluminess states all its products are designed to fit factory manufactured vehicles and that some aftermarket vehicle conversions are incompatible with Aluminess products.
144 low roof excluded
Aluminess states this rack is currently not available for 144 wheel-base low-roof vans.
Satellite antenna interference
Roof racks and roof-rack accessories may interfere with factory roof-mounted satellite antennas; antenna relocation may be required for full satellite radio functionality.
Lights are separate
Front lights and the optional Baja Designs S2 load lights are sold separately.
Install the light bar first
Both Explorer installation sheets direct fitting the light bar before installing the rack on the van, referring to the Baja Designs installation instructions.
California warning
Aluminess’s product page carries the California warning: “Cancer and Reproductive Harm - www.P65Warnings.ca.gov.”
Roof mounting
Stock or aftermarket roof rails are required on all Sprinter models.
Vehicle load limit
The installation instructions require referring to the vehicle manufacturer’s recommended maximum weight rating before operating the vehicle.
Use and legal compliance
Aluminess states its products are designed for off-road vehicle use and may exceed the vehicle’s factory-designed capabilities. It does not guarantee compliance with local vehicle laws; purchasers must establish suitability and legal compliance before use.
Vent layout
Standard vent cut-outs are included; non-standard and off-center-line vent cut-outs are available upon inquiry.
Specs, parts & installation
Roof surface and lighting provisions
| Flooring | Continuous perforated flooring |
|---|---|
| Front-light options | Baja Designs OnX6 50" curved light bar or Baja Designs Linkable lights; lights sold separately |
| Load-light option | Baja Designs S2 lights below the rack; lights sold separately |
Shipping dimensions & weight
| Height | 68 IN. |
|---|---|
| Width | 150 IN. |
| Depth | 16 IN. |
| Shipping weight | 250 LBS. |
What’s in the box
Rack layout
Continuous perforated flooring, standard vent cut-outs and front-light mounting tabs in the selected configuration.
Roof-track hardware
Stainless-steel fender washers, stainless-steel Nylock nuts, threaded inserts and one 2g anti-seize packet; quantities depend on whether the rack has 6, 8 or 10 mounting feet.
Linkable version
The Linkable installation sheet also lists one bolt-on center bracket; the ARC sheet does not list that bracket.
Supplemental hardware
The guides say some rack sizes may include a bag labelled “SUPPLEMENTAL KIT” for additional mounting feet.
Installation at a glance
Both Explorer installation sheets require two people and factory or aftermarket roof tracks already mounted to the roof.
After the light bar is fitted, slide the threaded inserts into the tracks from the rear and lower the rack with studs aligned to the mounting feet.
Apply anti-seize to all threaded inserts, position the rack and fasten the washers and Nylock nuts using only 6 ft-lbs. of torque.
Required tools: standard wrench set and leveling tool.
Mounting hardware by foot count
- 6 mounting feet: 12 fender washers, 12 Nylock nuts and 6 threaded inserts.
- 8 mounting feet: 16 fender washers, 16 Nylock nuts and 8 threaded inserts.
- 10 mounting feet: 20 fender washers, 20 Nylock nuts and 10 threaded inserts.
- Check the original packaging for a supplemental hardware kit if mounting feet remain after the first hardware kit is used.
Lead Time
Read Aluminess lead time policy on WNDR BuiltWarranty
This product
Aluminess’s Explorer installation sheets state that threaded inserts are not covered under warranty.
Returns
This product
Aluminess’s Refund Policy considers all roof racks special orders, nonrefundable unless a new buyer is found.
What are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon