
Aluminess
Side Ladder - 2014-26 RAM Promaster
Indexed listing. WNDR Built doesn't sell this product; the button opens aluminess.com.
Side access to your roof rack
The Aluminess Side Ladder provides a way to reach roof-rack cargo to strap it down. Its all-aluminum ladder mounts at the roof rack and the vehicle’s lower pinch weld, rather than through the rear door.
The lower plate hooks under and behind the pinch weld, while pipe clamps secure the top at the rack. This side-mounted arrangement lets the ladder sit between the door and the rear wheel. Aluminess offers separate high-roof and low-roof configurations.
Aluminum construction
Aluminess describes the ladder as all-aluminum.
Side placement
The maker states that the ladder can be located anywhere between the door and the rear wheel.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Aluminess
- 2014–2026 RAM ProMaster 1500
- 2014–2026 RAM ProMaster 2500
- 2014–2026 RAM ProMaster 3500
Choose your roof configuration
Select the configuration for your van’s roof height.
With High Roof
- For a high-roof van.
With Low Roof
- For a low-roof van.
Drilling required
The installation guide requires drilling two ¼” holes through the bottom plate and the vehicle’s pinch weld.
Required roof rack
An Aluminess Roof Rack is required to mount the ladder.
Rack-height adjustment
Depending on the roof rack height, the included pinch weld extension plate may be required; the guide specifies mounting it by the same method as the lower plate.
Factory-vehicle fit
Aluminess designs its products for factory-manufactured vehicles; some aftermarket conversions are incompatible. Contact Aluminess customer service with product compatibility questions.
Specs, parts & installation
Construction
| Ladder | All-aluminum |
|---|
Shipping dimensions
| Height | 11 IN. |
|---|---|
| Width | 91 IN. |
| Depth | 16 IN. |
| Shipping weight | 22 LBS. |
What’s in the box
Mounting hardware
The guide lists stainless steel button-head Allen bolts, eight 1/4 x 5/8 washers (.03” thick) and four 1/4-20 Nylock nuts.
Extension plate & lubricant
One pinch weld extension plate, shown as 3” x 15”, and one 2g antiseize packet.
Installation at a glance
Mount the ladder to an Aluminess roof rack and the lower pinch weld; drilling the lower plate and pinch weld is required.
Apply anti-seize assembly lubricant to each bolt’s threads before assembly, as recommended by Aluminess to prevent stainless steel hardware binding.
Use the guide’s Cruiser Roof Rack section if you have a Cruiser rack.
Unless otherwise specified, use the general torque values in the guide.
Verify all hardware remains tight after the first 100 miles and check periodically thereafter.
Standard rack attachment
- Hook the lower plate under and behind the vehicle’s pinch weld.
- Loosely fasten the pipe clamps using the ¼” x 1 ½” socket cap screw.
- Hold the lower plate tight against the pinch weld with a clamp or two; fit the extension plate if the rack height requires it.
- After drilling the lower mounting holes, fasten the lower mount with button-head bolts, washers and Nylock nuts.
- Tighten the top-bracket bolts and check that all hardware is tight.
Cruiser rack attachment
- Loosely fasten the pipe clamps between the rack side rails, with the top bolt through the pipe clamp and the top slot as pictured in the guide.
- Follow the Cruiser section for the lower mounting and final tightening steps.
Source notes
- Aluminess’s installation guide lists 1/4-20 x 1” bolts in Included Hardware, but its standard and Cruiser lower-mount steps specify ¼”-20 x 1 ¼” bolts; bolt length is omitted here.
- Aluminess’s product title lists 2014–2026; its Detailed Specs lists 2014–2027 for ProMaster 1500, 2500 and 3500. This listing uses the title’s range.
Lead Time
Bumpers and roof racks ship by LTL freight and do not qualify for free shipping; destination charges may apply. Inspect and record shipping damage before signing.
Read Aluminess lead time policy on WNDR BuiltWarranty
Lifetime warranty for the original retail purchaser requires correct installation under official instructions; modifications void coverage; exclusions apply, and claim shipping both ways may be customer-paid.
Read Aluminess warranty policy on WNDR BuiltReturns
Authorized nondefective returns within 15 days; custom/special orders excluded; roof racks require another buyer; refunds deduct all shipping, including Aluminess-paid outbound costs, and any restoration costs.
Read Aluminess returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon