
Aluminess
Rear Door Rack Base Unit - 2019-26 Sprinter
Indexed listing. WNDR Built doesn't sell this product; the button opens aluminess.com.
A modular rear-door base for boxes and bikes
This base unit gives storage boxes and bike carriers a mounting point on the Sprinter’s passenger-side rear door. It bolts to hinge brackets and a door-seam bracket, using existing mounting locations rather than drilling through the door. The base lets you build an exterior storage setup with separately selected accessories instead of using interior space for that gear.
The modular system supports horizontal bike mounts, storage boxes or an optional PowerLift for motorized bike loading. Clamp-on support posts attach to the base for box mounting, and longer posts are available for expanded setups. The base unit is the starting point: boxes, bike trays and the PowerLift battery are sold separately. Hinge requirements and accessory restrictions are listed under Fitment.
Three mounting locations
Upper and lower hinge brackets and a door-seam bracket attach the base to the passenger-side rear door.
Box supports
The included 8-inch support posts clamp onto the base; optional 22-inch support posts are available for expanded setups.
Back-up sensors
Aluminess states that the rack is compatible with back-up sensors without false alerts or interference.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Aluminess
- 2019–2026 Mercedes Sprinter, including Revel and Storyteller, as titled by Aluminess.
- Aluminess’s Detailed Specs list 2019–2025 Sprinter and Sprinter 1500; 2019–2026 Sprinter 2500, 3500 and 3500XD; and 2019–2025 Sprinter 4500.
Choose accessories on Aluminess’s page
Select optional accessories on the maker’s purchase page. Each accessory selector also offers None.
PowerLift Bike Rack V2
- Version compatible with Dewalt 20V
- Version compatible with Milwaukee M18
Storage box
- Deluxe Box
- Explorer Box
- Slim Box, without PowerLift
Bike tray
- Rocky Mount
- 1-Up Standard Duty
- 1-Up Super Duty, recommended by Aluminess for e-bikes
Hinge kit
- Optional 180° hinge kit
PowerLift requires 180° hinges
PowerLift use requires 180° hinges; a hinge kit is available separately. The Slim Box cannot be ordered with PowerLift.
Load limit
Aluminess’s installation guide specifies a maximum load of 200 lbs evenly distributed on the base unit while traveling.
Door clearance
The guide requires checking clearance between the product and the van at full opening, at the lower hinge while slowly closing, and at the brackets while opening and closing both rear doors. Adjust as needed.
California warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Hinges
Standard base-unit use is compatible with 180° and 270° hinges; Aluminess states that no hinge swap is required for standard use.
Vehicle modifications
Designed for factory-manufactured vehicles. Some aftermarket conversions are incompatible; Aluminess requires the purchaser to determine fitment with aftermarket accessories or vehicle modifications before purchase.
Specs, parts & installation
Finish & supports
| Finish | Textured black powder coat |
|---|---|
| Included support posts | Two 8-inch support posts |
| Optional support posts | 22-inch support posts, sold separately |
Shipping dimensions, not installed dimensions
| Height | 6 IN. |
|---|---|
| Width | 60 IN. |
| Depth | 32 IN. |
| Shipping weight | 29 LBS. |
What’s in the box
Base & support posts
Rear door rack base unit and two 8-inch support posts.
Mounting brackets & spacers
Upper and lower passenger-side hinge brackets, door-seam bracket and three M8 machined spacers.
Door protection & emblem parts
Center, lower-hinge and upper-hinge protective tape; replacement emblem and logo shim.
Optional strap installation parts
Door-limiting strap, webbing anchor, hard-stop strap bracket and strap clamp. The guide labels limiting-strap installation optional.
Hardware
Mounting bolts, nuts, washers, weld nuts and anti-seize.
Sold separately
Boxes, bike trays, PowerLift battery and other accessories are sold separately.
Installation at a glance
Bolt-on installation uses the passenger-side rear-door hinges and existing door-seam holes; remove the Mercedes emblem and two door plugs as directed.
Apply anti-seize to the threads of every stainless steel bolt before assembly.
Apply protective tape out of direct sunlight, above 60 ˚F, after washing your hands thoroughly; prepare the surfaces and wetting solutions as the guide directs.
When replacing hinge bolts, leave the upper bolt installed while replacing the lower bolt.
Check mounting hardware after the first 100 miles of driving and periodically thereafter. Follow separate instructions for additional Aluminess products.
Tools listed in the guide
- Standard/metric wrenches and sockets
- Standard Allen keys and Torx bit
- Isopropyl alcohol, liquid soap, spray bottle and clean rag
- Squeegee or plastic card
Protective tape preparation
- Clean around each hinge with isopropyl alcohol and a rag.
- Prepare separate wetting solutions: 95% water and 5% soap; 75% water and 25% isopropyl alcohol.
- Follow the guide’s wet application and edge-wrapping procedure.
Optional limiting strap
- Install the strap and webbing anchor at the lower hinge bracket.
- Install the hard stop at the van-side lower hinge as shown in the guide; direct the strap toward the lower hinge when tightening the clamp.
Base & support attachment
- Loosely install the base mounting bolts before tightening.
- Tighten the hinge brackets and check door clearance.
- Position the support posts facing outward at the bottom pipe, with the side where the clamp top is flush with the post on top; tighten the pipe clamps.
Source notes
- Aluminess’s title lists 2019–2026 Sprinter, its description says 2019+, and its Detailed Specs end at 2025 for Sprinter, 1500 and 4500, but 2026 for 2500, 3500 and 3500XD.
- The installation guide’s hardware table lists 1/4-20 x 1-inch bolts and two 1/4-inch flat washers; step 35c calls for 1/4 x 3/4-inch bolts and four washers at the center door seam. Disputed sizes and quantities are omitted here.
Lead Time
Bumpers and roof racks ship by LTL freight and do not qualify for free shipping; destination charges may apply. Inspect and record shipping damage before signing.
This product
Aluminess’s product page says lead times may apply and directs buyers to info@aluminess.com for current timing.
Warranty
Lifetime warranty for the original retail purchaser requires correct installation under official instructions; modifications void coverage; exclusions apply, and claim shipping both ways may be customer-paid.
Read Aluminess warranty policy on WNDR BuiltReturns
Authorized nondefective returns within 15 days; custom/special orders excluded; roof racks require another buyer; refunds deduct all shipping, including Aluminess-paid outbound costs, and any restoration costs.
Read Aluminess returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon