
Aluminess
Front Bumper - Transit 2015-19
Indexed listing. WNDR Built doesn't sell this product; the button opens aluminess.com.
Front-end protection with a winch cradle
Aluminess designed this front bumper to combine front-end protection with winch recovery. Its aluminum body incorporates a steel winch cradle, and built-in tow hooks provide attachment points for vehicle recovery.
Aluminess says the compact design is intended to preserve ground clearance and approach angle. Rectangular openings provide space for auxiliary lights on both sides, and a separate hitch receiver is available as an add-on.
Light openings
The rectangular openings are designed to fit a pair of square LED pod lights on each side.
Powder-coated aluminum
The bumper uses 6061 and 5052 aluminum with a textured black powder finish.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Aluminess
- 2015-2019 Ford Transit
- 2015-2019 Ford Transit-150
- 2015-2019 Ford Transit-250
- 2015-2019 Ford Transit-350
- 2015-2019 Ford Transit-350 HD
Choose your bumper configuration
Aluminess offers two configurations.
With Brush Guards and Center Hoop
- Includes brush guards and a center hoop.
Without Brush Guards
- Bumper configuration without brush guards.
Winch solenoid relocation
Aluminess states that most winches will require remote-mounted solenoids to retain the bumper’s compact design, ground clearance and approach angle. Solenoid relocation will likely be required.
Factory-vehicle fit
Aluminess designs its products for factory-manufactured vehicles. Some aftermarket vehicle conversions are incompatible; contact Aluminess customer service with product compatibility questions.
California warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Sensor holes
The maker’s product page offers Sensor Holes (Drilled): Yes or No. Buyers must choose Yes or No under Sensor Holes (Drilled) on Aluminess’s site when ordering, in addition to choosing a bumper configuration.
Specs, parts & installation
Construction
| Bumper material | 6061 and 5052 aluminum |
|---|---|
| Winch cradle | Steel |
| Finish | Textured black powder finish |
Guard configuration
| Center guard, with guards selected | 2″ (2.375” OD) |
|---|---|
| Outer guards, with guards selected | 1.5″ (1.9” OD) |
Shipping dimensions and weight
| Shipping height | 36 IN. |
|---|---|
| Shipping width | 87 IN. |
| Shipping depth | 48 IN. |
| Shipping weight | 220 LBS. |
What’s in the box
Bumper and selected configuration
Front bumper with built-in tow hooks and a steel winch cradle; brush guards and center hoop are supplied with the With Brush Guards and Center Hoop configuration.
Not included
Lights, shackles, receivers, winches and brush guard crossbars are not included with the standard bumper. The hitch receiver is sold separately.
Lead Time
Read Aluminess lead time policy on WNDR BuiltWarranty
Read Aluminess warranty policy on WNDR BuiltReturns
Read Aluminess returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Owner reports
Quotes from owners and installers, with links to where they were posted. These are owner reports, not manufacturer-confirmed information, and may describe a different van or year than yours. Verify before you buy.
I had mine shipped to Colorado and it was damaged in shipment the first time around.
View originalExecutive Summary: Looks great and is well made with a few minor QC issues and a PITA install process that is at the very extreme end of "bolt-on".
View originalTo remove the spot welds I cut the outer ones with a cut-off wheel, and drilled out the inner ones with a 12" long 5/16" drill bit.
View originalI recommend using a socket and 12" extension so you can get around all the A/C stuff in the way.
View originalThere is a plastic shroud for routing air into the radiator that will interfere with the bumper.
View originalI made it work by gluing the washers to the nuts ahead of time and bending the end of the light tube slightly out of the way for more clearance.
View originalAgain Aluminess provided bolts that were too long here and they needed to be replaced with shorter ones (or at least bolts without a shank).
View originalI ended up settling on ~1/4" gap which looks more even all around.
View originalSearches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon