
Agile Off Road
Sprinter Water Tank & Tire Carrier Bundle
Indexed listing. WNDR Built doesn't sell this product; the button opens agileoffroad.com.
Water storage below, spare tire on the rear door
This bundle pairs a spare-tire-basket water tank with a rear-door tire carrier. Moving the spare onto the driver-side rear door makes its original basket available for water storage. The tank sits in the factory basket and can carry fresh or grey water.
The carrier follows the swing of the rear door and distributes the tire load across the hinges. Its locating lug pin helps position the wheel during mounting, while an included reinforcement brace supports the rear door. An optional fill kit connects to the tank’s existing spun-welded ports for refilling.
Basket-mounted water storage
The tank uses the factory spare-tire holder and hardware rather than a separate tank mounting frame.
Door-mounted spare
The steel carrier has a textured black powder-coated finish, a billet aluminum logo badge and stainless steel mounting hardware.
Optional fill plumbing
Select the fill kit to add hoses, a water inlet and quick-release fittings for the spare-tire-basket tank.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Agile Off Road
- Mercedes-Benz Sprinter 2500 and 3500 · Third generation (VS30) · 2019+.
- Optional fill kit: Agile’s component page lists 2021+ Sprinter-based vans.
Choose wheel hardware
Choose the hardware for the wheel mounted on the carrier. Each choice is available with or without the fill kit.
3500 Dually
- Sprinter 3500 dually wheel adaptor and hardware.
- Genuine Mercedes ball-seat lug nuts.
Aftermarket Alloy
- (3) 17mm cone-seat aftermarket alloy wheel lug bolts.
Factory Alloy
- (3) factory alloy wheel lug bolts.
Factory Steel
- (3) factory steel wheel lug bolts.
No Hardware
- Carrier and mounting hardware, without spare-tire wheel hardware.
Splined Aftermarket Alloy
- (3) “Shorty” 38mm wheel studs.
- (3) splined lug nuts and (1) wheel lug nut key.
Choose the fill kit
The bundle offers a Yes/No fill-kit selection.
Yes
- Adds a fill kit for the spare-tire-basket water tank.
No
- Water tank and tire carrier without the fill kit.
180° hinges required
The carrier only fits vans with 180° rear-door hinges, identifiable by two circular holes in the center. Vans with 270° hinges need the 180° driver-side replacement hinges offered by Agile.
Door clearance
Agile states the door opens 180 degrees with a factory wheel and tire. Window flares or oversized aftermarket tires (285+ width) may contact the van with the door fully open; Agile says the included limited-travel doorstops can be installed for those applications.
Non-pressurized tank
The tank is designed for non-pressurized systems and must be vented.
Drilling and cutting
Carrier installation requires two holes behind the rear-door emblem. Installing the included reinforcement brace requires eight holes through the inside door panel. The fill-kit manual’s gravity-fill setup requires a 2-1/4” hole through the flooring and sheet metal, cutting the gravity-port membrane and hoses, and two 1/4” bracket holes.
Additional fill-kit parts
The black garden hose is not included. Additional vehicle-compatible hardware may be required; the fill-kit manual requires separately supplied deck-filler screws and notes that adding a pump or filter may require additional parts.
Off-road reinforcement
For frequent off-road use, Agile recommends installing the included rear-door reinforcement brace to prevent damage from tire movement. The brace fits only the driver-side rear door, not the passenger side.
Tank basket
The tank fits the Sprinter 2500 spare-tire basket. Sprinter 3500 models need a Sprinter 2500 tire basket.
Extended and dually vans
Sprinter 170 Ext may have different brackets; Agile asks buyers to confirm before ordering. On dually Sprinter 3500 vans, lowering brackets or cutting spacers from the frame may be needed; Agile says to measure before ordering because the dually wheel is narrower.
Fill-kit integration
Agile lists integration with the existing water system on 2021+ Winnebago Revel 4x4 and 2021+ Storyteller Mode 4x4 vans. A 2020 STO Mode can be modified to function similarly; contact Agile for details.
Specs, parts & installation
Water tank
| Capacity | 28-gallon |
|---|---|
| Material | BPA Free, food grade plastic |
| Use | Fresh or grey water; non-pressurized, vented system |
Tire carrier
| Construction | Steel; textured black powder-coated finish |
|---|---|
| Hardware | Stainless steel mounting hardware; billet aluminum logo badge |
| Weight limit | Agile states 100 lbs. |
| Depth | Agile lists approx. 16″ from rear glass (2500) |
Bundle
| Product weight | 55.0 lb |
|---|
What’s in the box
Base bundle
(1) 28-gallon Sprinter spare-tire-basket water tank and (1) rear-door tire carrier for 2019+ Sprinter.
Carrier equipment
Mounting hardware, limited-travel doorstops, rear-door reinforcement brace and replacement rear emblem. Wheel hardware follows the selected option; No Hardware excludes spare-tire wheel hardware.
Optional fill kit
Included only when With Fill Kit is set to Yes.
Installation at a glance
Install according to Agile’s instructions using qualified personnel; Agile recommends professional installation.
The tank sits in the factory spare-tire basket with the spare removed. Carrier installation uses hand tools and a drill. Read the separate reinforcement-brace and fill-kit manuals before starting; the fill-kit manual covers a gravity-fill installation.
Fill-kit manual — gravity-fill setup
- Use the manual’s tank orientation and fitting diagrams before cutting or drilling.
- After drilling the floor opening, file or sand sharp sheet-metal edges and paint the exposed metal.
- Cut the clear hose to the measured length; the manual specifies 30-35 inch lbs. for the worm-drive clamp and 25-30 ft lbs. for the cage hook bolts.
- Fit the deck filler with appropriate-length screws, which are not supplied.
- Route the breather hose down the tank’s front driver-side corner, secure it to the cage and cut it approx 1” below the tank bottom.
- Connect the drinking-water hose, fill the tank and check for leaks.
Reinforcement-brace manual
- Remove the driver-side rear door panel if equipped.
- Position the reinforcement plate without covering existing panel holes; mark its eight mounting points.
- Use a center punch, then a 5/16 in. drill bit; Agile recommends a drill-bit stop collar to avoid the outer door skin.
- Install the nut plate and reinforcement plate with the supplied hardware, tighten all bolts and reinstall the door panel.
Source notes
- Agile’s bundle page lists 2019+ VS30 fitment, while its fill-kit page lists 2021+ Sprinter-based vans, with a modification route for 2020 STO Mode; this listing uses the narrower fill-kit fitment.
- Agile’s bundle description lists a fill kit in the contents, but its live selector offers With Fill Kit Yes or No; this listing follows the selector.
- Agile’s separate fill-kit page offers configurations with or without gravity fill, but the bundle selector does not identify which configuration Yes supplies; gravity-fill components in the fill-kit manual are not confirmed bundle contents.
- Agile’s carrier description says it needs only two drilled holes behind the emblem; the included reinforcement kit’s guide additionally calls for eight holes inside the driver-side door, which this listing follows when installing that brace.
- Agile’s tank description gives overall dimensions of 28″ W x 30″ L x 10″ H, while its component specification table says 25 x 29 x 13 without units; tank dimensions are omitted.
- Agile’s carrier description says it weighs 19 lbs., while its specification table lists 30.0 lb; carrier weight is omitted.
- Agile’s fill-kit manual parts table lists a 3/4” NPT X 1/2” Barb elbow adapter, while step 4 specifies a 1/2” NPT to 3/4” barb elbow fitting; this listing omits the disputed fitting size.
Lead Time
Read Agile Off Road lead time policy on WNDR BuiltWarranty
Warranty coverage varies by product; eligible Agile components are covered for the original purchaser during ownership.
Read Agile Off Road warranty policy on WNDR BuiltReturns
Contact Agile within 90 days of purchase for eligible returns; a 10% restocking fee applies after 30 days, and customers pay return shipping.
Read Agile Off Road returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon