
White Top Adventures
Sprinter Rear Tire Carrier with Molle Panel
Indexed listing. WNDR Built doesn't sell this product; the button opens whitetopadventures.com.
A rear-door spare mount with space for gear
White Top Adventures’ Rear Tire Carrier with MOLLE Panel moves a spare wheel onto the rear door and provides a mounting surface for tools, pouches and other accessories. It combines the spare carrier and gear panel in one assembly rather than using the door only for the tire.
A support loop carries the wheel, while an adjustable center rod, wheel bushing and tire handle secure it. The rod can be positioned to suit the wheel setup; the guide also describes leaving it out when mounting a box instead of a tire. The carrier attaches at the upper and lower door hinges and a third mounting point through the door.
MOLLE accessory mounting
The integrated panel provides attachment points for MOLLE pouches, tools and recovery gear.
Outdoor finish
The aluminum carrier has a matte black powder-coat finish. White Top Adventures describes it as rust-resistant for year-round outdoor use.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by White Top Adventures
- 2019+ Mercedes-Benz Sprinter VS30, driver-side rear door, with 180° hinges.
- 2020+ Winnebago Revel and Storyteller Overland Mercedes Sprinter models with 180° hinges.
3500 Dually
Not compatible with the 3500 Dually unless additional OEM parts are purchased from Mercedes-Benz, according to White Top Adventures’ product compatibility statement.
Aftermarket tire clearance
The product-page FAQ reports that 315s can prevent full rear-door opening by contacting the Mercedes emblem; 305s may clear depending on rim offset. White Top Adventures asks owners with non-stock tires to contact it before ordering to confirm their setup.
Drilling required
Installation requires drilling through the rear door for the third mount and enlarging the outside hole to 20mm. Panel-style door trim requires additional drilling and an inside hole enlarged to 28mm, according to the matching MOLLE guide.
Hinge setup
The carrier requires 180° rear-door hinges. The installation guide requires replacing 270° hinges with 180° hinges and notes that the factory rubber bump stop may need transferring to the replacement hinges. The product-page FAQ says to verify hinge type before ordering for 4x4 models and Winnebago Revel builds.
Wheel mounting
White Top Adventures lists standard Sprinter spare tire sizes. The guide specifies the M16 - 450mm center bolt for a dually or when a longer bolt is needed; the center rod’s height and depth are adjustable for the wheel setup. Use the larger wheel bushing if the wheel does not have a standard hub size.
Installer requirement
White Top Adventures recommends a professional installer. If you lack mechanical experience or are unfamiliar with the procedure, its guide requires a qualified professional or someone with the necessary expertise.
Before use
Inspect mounting points and attachments before use and regularly check for wear or damage, as required by the installation guide.
Specs, parts & installation
Construction
| Material | Solid aluminum |
|---|---|
| Finish | Matte black powder coat |
Wheel retention
| Center rod options in the guide | M16 - 300mm or M16 - 450mm; the longer bolt is specified for a dually or when extra length is needed. |
|---|---|
| Adjustment | Center rod height and depth adjust for the wheel setup. |
What’s in the box
Carrier and mounts
One door frame, one door mounting plate, one lower hinge backing plate, one upper hinge backing plate and one frame-to-door bushing, as listed in the MOLLE guide.
Wheel support and accessories
One tire support loop, one tire handle, one rubber wheel bushing, one larger wheel bushing and two foot pegs, as listed in the MOLLE guide.
Hardware
The MOLLE guide lists M10 mounting screws, M10 washers and locknuts, M16 center bolts with washers and a nut, and M8 X 50 socket-head screws.
Installation at a glance
Drilling the rear door is required; White Top Adventures recommends professional installation.
If applicable, remove the lower interior door panel and clear wires, insulation and other obstructions from the mounting area.
Align the lower hinge bracket’s door stop so it engages the factory bump stop. Do not overtighten the third-mount bolt: the guide says to tighten if the bushing moves and back off if it bulges.
Third-mount preparation in the MOLLE guide
- Align the door mounting plate with the body lines and mark the mounting position.
- Use a M5 Drill Bit through the first and second layers of metal, followed by a M10 Drill Bit through all layers. Use a step bit to enlarge the outside hole to 20mm.
- For panel-style trim, drill through to the backside sheet metal and enlarge the inside hole to 28mm for an 18mm deep socket.
- The guide recommends rust-inhibiting paint on exposed metal. Clean the exterior mounting surface with alcohol or a residue-free cleaner, remove the backing from the plate’s 3m VHB tape and press the plate into place.
Carrier and wheel setup
- Attach the support loop with the guide’s M10 - 80mm bolts using a 10mm Allen wrench. The guide calls for a 24mm socket or wrench and another 24mm wrench when securing the center rod.
- Fit the hinge backing plates and leave the carrier loose for alignment; the guide describes a friend holding the plates and door, or tape holding the plates with the door closed.
- With the carrier aligned and all mounts secured as the guide directs, center the rod in the resting wheel, fit the appropriate wheel bushing and tighten with the tire handle.
- If mounting a box instead of a tire in this location, the guide says the wheel center lock rod is not needed.
Source notes
- White Top Adventures’ MOLLE guide hardware table lists four M10*30 hinge screws; Step 4.1 calls for four M10-25mm screws, while Figure 12 labels M10 *30 screws. The hinge screw length is unconfirmed and omitted from the parts list.
- The same guide’s hardware table lists three M10 nylon locknuts; Step 4.1 calls for four M10 Nylock nuts at the hinges and the third-mount instructions use another M10 nut. The supplied nut count is unconfirmed and omitted from the parts list.
- The MOLLE guide’s package list calls the larger wheel bushing nylon; Step 6.2 calls it vinyl. This listing leaves its material unspecified.
- The product-page FAQ names the Sprinter Rear Tire Carrier Ladder and says it fits high-roof vans only; the matching MOLLE guide states 2019 and newer vans with 180-degree hinges without a roof-height restriction. This listing follows the matching MOLLE guide and does not use the FAQ’s linked ladder manual.
- White Top Adventures’ FAQ says all lower-48 U.S. orders include free UPS Ground shipping; its Shipping Policy says most continental-U.S. orders ship free and some locations or freight services incur fees.
Lead Time
Free shipping: most continental-US orders on Shipping policy, all lower-48 orders on FAQ, all orders on Homepage banner; remote-location and special-freight fees may apply.
This product
The product-page FAQ states that in-stock orders ship the same day or next business day and arrive in 3–7 business days.
Warranty
Read White Top Adventures warranty policy on WNDR BuiltReturns
Returns within 30 days of delivery require unused, uninstalled, unassembled items in original packaging; 15% restocking and customer-paid shipping apply; large freight items have additional fees.
Read White Top Adventures returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon