
White Top Adventures
SPRINTER REAR TIRE CARRIER LADDER
Indexed listing. WNDR Built doesn't sell this product; the button opens whitetopadventures.com.
A spare tire carrier with a ladder to the roof
This rear-door unit stores a spare tire and provides a ladder to the roof on a Mercedes-Benz Sprinter. White Top Adventures says the spare on the door frees space under the van for items such as water or auxiliary fuel tanks, and that the ladder can also serve as a secondary ladder for extra reach.
The carrier uses a 2" aluminum tube frame with a stainless-steel wheel mount, machined aluminum foot pegs and dimpled rungs, and a silicone dampener at the third mounting point to limit body wear.
Center-rod wheel attachment
White Top's V1.3 guide uses a tire support loop and a center rod secured with a tire handle. The rod height adjusts to center it in the resting wheel.
Third mounting point
A frame-to-door bushing connects the carrier to the door mounting plate, in addition to the upper and lower hinge attachments.
Optional foot pegs
White Top's V1.3 guide makes fitting the supplied foot pegs optional and says to install them last to avoid scratching the paint or tail light.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by White Top Adventures
- 2019+ Mercedes-Benz Sprinter vans with 180° hinges (VS30, driver's side), and 2020+ Winnebago Revel and Storyteller Overland (Mercedes Sprinter models) with 180° hinges (driver's side), as White Top states it.
- White Top's FAQ says the ladder is designed for the high roof Sprinter and extends to the top of the van, and that a standard or low roof Sprinter is not compatible; it also says the carrier is compatible with all Sprinter high roof vans from 2019 onward with standard 180° hinges.
Drilling required
The V1.3 guide requires drilling through the door for the third mount: an M5 pilot through the first and second layers, then M10 through all, with the outside hole enlarged to 20mm. Panel-style door trim also requires an inside hole drilled to 28mm for an 18mm deep socket.
Door-stop alignment
The guide requires opening the door to ensure the door stop on the lower hinge bracket engages the factory bump stop before tightening the hinge fasteners. Do not over-tighten the third-mount bolt: the guide says to tighten if the bushing has movement and back off if it bulges.
Hinges
The rear doors must open 180°. White Top says most 2019+ Sprinters have 180° hinges from the factory; if the doors stop at about 90°, the hinges need upgrading before installation. For 4x4 models and Winnebago Revel builds, White Top says to confirm the hinge type before ordering. White Top sells OEM-style 180° hinges separately, and its guide says a van with 270° hinges needs them swapped to 180° and the factory rubber bump stop may need to move to the new hinges.
Tire size
White Top says the carrier fits all tire sizes up to 285mm wide without modifications. Its FAQ says 315 mm tires have been reported to stop the rear door opening fully without hitting the Mercedes emblem, and that 305 mm tires may clear depending on rim offset. White Top asks buyers with non-stock tires to contact it before ordering to confirm clearance for their specific setup.
Dually
For a 350 dually, White Top says to contact it so the correct wheel puck size is sent; the guide lists a longer M16-450 mm center bolt for a dually or a longer-bolt need.
Installer requirement
White Top's V1.3 guide strongly recommends professional installation. If you lack mechanical experience or are unfamiliar with the installation procedures, it requires a qualified professional or someone with the necessary expertise.
Before use
White Top's guide requires inspecting mounting points and attachments before use and regularly checking for wear or damage.
Specs, parts & installation
Frame & construction
| Weight | 33.5 lbs, per White Top |
|---|---|
| Frame | 2" aluminum tube; powder-coated aluminum construction |
| Wheel mount | Stainless steel |
| Climbing surfaces | Machined aluminum foot pegs and dimpled rungs |
| Third mount | Silicone dampener |
Maker load ratings
| Static load | White Top states 300 lbs; its page adds "Unless otherwise specified by the manufacturer". |
|---|---|
| Dynamic load | White Top states 300 lbs; its page adds "Unless otherwise specified by the manufacturer". |
What’s in the box
Carrier & plates
Main frame, door mounting plate, lower hinge backing plate and upper hinge backing plate.
Wheel support & bushings
Tire support loop, tire handle, rubber wheel bushing, larger wheel bushing and frame-to-door bushing.
Foot pegs
Two foot pegs; installation is optional under the V1.3 guide.
Hardware
M10 mounting screws, flat washers and nylon locknuts; M10x65 button head screw ×1; M10x80 socket head screws ×2; M16x300 hex head screw ×1; M16x450 hex head screw ×1; M16 washers ×2; M8x50 socket head screws ×2; M16 hex nut ×1.
Installation at a glance
White Top's V1.3 guide uses hinge backing plates and a drilled third door mount. Have a helper hold the carrier and backing plates while positioning them.
The door mounting plate adheres with its 3M VHB tape after cleaning the surface with alcohol or a residue-free cleaner. The guide recommends rust-inhibiting paint on exposed metal.
Installation sequence from the V1.3 guide
- Remove the lower interior door panel, if applicable, and clear obstructions such as wires and insulation from the mounting area. Trim types require their own removal methods.
- Align the door mounting plate to the body lines, mark and drill the third mount as described above, touch up exposed metal and adhere the plate.
- Attach the wheel support loop with two M10-80mm socket head bolts and an 8mm Allen wrench.
- Fit the M16-300mm center rod, or the M16-450mm rod for a dually or a longer-bolt need, with its washers and nut. Use a 24mm socket or wrench and another 24mm wrench; adjust the rod to the wheel before final tightening. The center rod is not needed if mounting a box instead of a tire.
- Place hinge backing plates behind the 180° hinges. Position the carrier with help and leave the hinge attachments loose for alignment. Assemble the third-mount screw, washers, nut and frame-to-door bushing through the door.
- Align the carrier with the door/window body lines, check the door stop against the factory bump stop, then tighten hinge fasteners and the third mount without over-tightening the bushing.
- Lift the wheel onto the carrier and center the rod in the resting wheel. Fit the rubber wheel bushing, or the larger bushing for a non-standard hub, and secure it with the tire handle.
- If fitting the optional foot pegs, install them last with the M8*50 socket head screws to avoid scratching the paint or tail light.
Tools and supplies named in the V1.3 guide
- Plastic panel removal tools; drill with M5 and M10 bits and a step bit for the 20mm outside hole and, where applicable, the 28mm inside hole.
- 18mm deep socket; 8mm Allen wrench; 24mm socket or wrench and a similar 24mm wrench.
- Rust-inhibiting paint and alcohol or residue-free cleaner; double-sided tape is suggested to hold backing plates, washers or nuts during positioning.
Source notes
- White Top’s V1.3 guide hardware page lists four M10*30 hinge screws, while step 4.1 and the step 5 diagram specify M10-25mm screws; hinge screw length is omitted here.
- The V1.3 hardware page lists three M10 nylon locknuts; step 4.1 calls for four at the hinges, and the third-mount assembly calls for another M10 nut. The disputed total is omitted here.
- The V1.3 package page calls the larger wheel bushing nylon, while step 6.2 calls it vinyl; this listing leaves that material unspecified.
- White Top’s product FAQ also links the 2606 guide, which uses a wheel bracket and lug nuts; its installation download links V1.3, which uses a support loop and center rod with tire handle. This listing follows V1.3.
- The product FAQ says White Top does not offer installation as a standard service; its general FAQ offers local installation appointments at its Tustin warehouse.
Lead Time
Free shipping: most continental-US orders on Shipping policy, all lower-48 orders on FAQ, all orders on Homepage banner; remote-location and special-freight fees may apply.
This product
This product’s FAQ says in-stock orders ship the same or next business day and arrive in 3–7 business days.
Warranty
Read White Top Adventures warranty policy on WNDR BuiltReturns
Returns within 30 days of delivery require unused, uninstalled, unassembled items in original packaging; 15% restocking and customer-paid shipping apply; large freight items have additional fees.
Read White Top Adventures returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon