
VanMade Gear
Transit Passenger Van - Rear Door Shades (set)
Indexed listing. WNDR Built doesn't sell this product; the button opens vanmadegear.com.
Rear-window privacy with adjustable zip openings
VanMade Gear lists a set of insulated rear door shades for the Transit Passenger Van. The shades use a flexible four-layer construction that VanMade Gear describes as providing heat reflection and thermal isolation while remaining soft and pliable for stowing.
Top-down dual Lenzip™ zippers let you vary how far the shades are open. For open storage, the rear-door instructions show rolling each shade all the way down and zipping it back up slightly on each side. VanMade Gear says it makes its shades in Portland, Oregon.
Top-edge closure
A metal strip across the top edge provides quick closure.
Water-repellent fabric
VanMade Gear uses water-repellent, ultraviolet-ray-resistant fabrics.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by VanMade Gear
Transit Passenger Van - Rear Door Shades (set)
Specs, parts & installation
Materials
| Fabric | Water-repellent, UV-resistant fabric, per VanMade Gear |
|---|---|
| Construction | 4 layers: outdoor grade polyester fabric (inside face) + 3M Thinsulate™ + aluminized Tyvek™ + ballistic polyester |
Colors
| Interior Color | Black, Silver Dust, Sandstone, Moss |
|---|---|
| Exterior Color | Black |
What’s in the box
Rear-door shades
Rear door shade set.
Top-edge mounting strips
Each shade comes with a pre-cut strip of painted steel with VHB adhesive, according to the Transit Passenger guide.
Installation at a glance
Install the supplied adhesive steel strips and tuck the shades behind the rear-door trim.
Clean the glass and let it dry before mounting the strips; the guide gives optimal temperatures as >=50 degrees Fahrenheit.
Release the upper and side plastic trim, and pop the upper corners of the lower trim panel free with a trim-removal tool or flathead screwdriver.
Let the perimeter magnets attach to the edges, tuck the bottom edge in first, then pop the removed trim panels securely back into place.
Fit the adhesive top strips
- Test-fit each strip at the top edge of the window and trim as needed.
- Peel 3-4 inches of backing from one end, leaving the peel hanging straight down.
- Position the strip to expose as much of it as possible without letting light leak through, then stick the peeled end to the glass.
- Slowly pull the rest of the backing straight down while holding the entire strip tightly against the window.
Lead Time
Approximate lead time is 4 weeks, with free standard shipping within the continental U.S.; email for a quote elsewhere.
Read VanMade Gear lead time policy on WNDR BuiltWarranty
Material and workmanship defects are covered for life; VanMade Gear chooses repair or replacement, and the customer pays shipping both ways.
Read VanMade Gear warranty policy on WNDR BuiltReturns
Approved returns within 60 days of delivery; custom work and warned-against fitment purchases excluded; customers pay shipping unless VanMade error; damaged products risk fees or rejection.
Read VanMade Gear returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon