
Flatline Van Co.
Transit Van Rear Ladder + Tire Carrier
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
One rear-door assembly for the spare and roof access
This combined ladder and tire carrier moves the spare onto the Transit’s driver-side rear door while providing access to roof gear, solar panels and decking. Flatline says relocating the spare creates space underneath the van for tanks and other accessories.
The third door mount uses a dual-shock silicone dampener. Flatline says it absorbs shock in both directions to handle the added spare-tire weight and bounce-back momentum when the door closes. The combined layout leaves the passenger-side rear door available for other rear-door products.
Frame & climbing surfaces
A 1.75 in aluminum tube frame carries dimpled steps and machined aluminum foot pegs.
Wheel mounting
The stainless steel wheel mount uses corrosion-resistant studs, locking lug nuts and a lug-nut key; the lock rod adjusts for different wheels.
Spacer plate
A machined aluminum spacer plate is included for wheel-clearance adjustment.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
- 2015+ Transit 150/250/350 | 130"/148"/148" EXT | Mid/High Roof
- 2023–2024 Transit Trail | 148"/148" EXT | Mid/High Roof
Choose your wheel mount
Flatline lists these stock and aftermarket wheels for each option.
Short Wheel Mount
- Ford Transit Stock 2WD Wheel
- Ford Transit Stock Trail Wheel
- Method 701 & 703 Wheels in 5x160mm bolt pattern
- Black Rhino Sequoia Wheel
- XD 820 Grenade Wheel
Long Wheel Mount
- Ford Transit Stock AWD Wheel
- Ford Transit Stock Dually Wheel
- Method 701 & 703 Wheels in 6x180mm bolt pattern
- Black Rhino Arsenal Wheel
- Owl Talon Wheel
Rear-door opening limit
The guides warn that opening the driver-side rear door past 90° can bring the carrier into contact with the van.
Drilling required
Prepare the front-facing third-mount hole with a 3/16 in pilot, enlarge it to 27/64 in, then deburr and paint the edges. Drill the 9/32 in or similar side hole only if the door does not already have it.
Hitch lock not included
The lock rod is compatible with a traditional hitch lock. The Long Wheel Mount guide specifies a 5/8 in diameter hitch-pin lock, such as CURT 23518, which is not included.
California Proposition 65
Flatline warns that this product can expose you to lead and lead compounds, DEHP and bisphenol A (BPA), which California identifies as causing cancer and birth defects or other reproductive harm.
Door attachment
Mounts to the driver-side rear door hinges and is compatible with both hinge types.
Wheel & spacer clearance
For lower-offset aftermarket wheels, the guides allow the included spacer plate for additional clearance. If the wheel/tire setup is uncertain, test-fit the spare before proceeding; use the spacer plate if the tire compresses excessively against the carrier when tightened. Flatline states that the 65 mm studs accept up to a 15 mm spacer.
Installer requirement
Flatline recommends professional installation of aftermarket accessories; its guide requires a professional installer or other qualified person if you have no mechanical experience and are not thoroughly familiar with the installation procedures.
Before use
Flatline requires checking mounting points and attachments before use and regularly inspecting the product for wear or damage.
Specs, parts & installation
Frame & construction
| Frame | 1.75 in round aluminum tube |
|---|---|
| Finish | Powder-coated aluminum |
| Third mount | Dual-shock silicone dampener |
| Foot pegs | Machined aluminum |
Wheel-mounting hardware
| Wheel mount | Stainless steel |
|---|---|
| Wheel studs | M14x1.5, 65 mm length, yellow zinc finish, grade 10.9; Flatline states they accept up to a 15 mm spacer |
| Lug nuts | Locking lug nuts and key |
| Lock rod | Adjustable for different wheels |
| Spacer plate | Machined aluminum |
What’s in the box
Carrier & brackets
Combined ladder/tire-carrier frame, wheel bracket, two backer plates, upper and lower hinge brackets, internal door brace and lower frame brace.
Third mount & templates
Bushing cap, tall and short bushings, sealing washer, front drill template and side drill template.
Wheel & climbing hardware
Adjustable lock rod, machined aluminum spacer plate, three wheel studs, three locking lug nuts, lug-nut key, two foot pegs and foot-peg wrench.
Mounting supplies
Mounting screws, washers and locknuts; the Long Wheel Mount guide also lists threadlocker.
Installation at a glance
Flatline’s guides estimate 1–2 hours and suggest additional help for some steps.
Remove the lower door trim, peel back the vapor barrier and prepare the third mount. Support the door to prevent twisting while fitting the hinge brackets, then check closing clearance before tightening the factory hinge bolts. With help, secure the carrier, internal brace and lower frame brace and check door operation.
Wheel & foot-peg installation
- Apply threadlocker to the short ends of the wheel studs before threading them into the wheel bracket and spacer plate, if used.
- Fit the wheel and tighten the lug nuts using the supplied key.
- Apply threadlocker to the foot-peg threads, then tighten with the supplied foot-peg wrench.
- The guides permit omitting the lock rod when using locking lug nuts.
Lead Time
Flatline’s FAQ lists in-stock dispatch in 1–2 business days and free lower-48 shipping; its Shipping policy lists flat-rate/economy options, with no-charge economy sometimes offered for longer lead times and typical LTL delivery of 7–21 business days.
Read Flatline Van Co. lead time policy on WNDR BuiltWarranty
Flatline’s Refund policy gives the original purchaser a one-year, non-transferable limited warranty covering product cost only, excluding installation, labor, freight and damage from racing, competition or trail use; alteration, modification or improper installation voids coverage.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Flatline’s Refund policy accepts returns with a pre-authorized RMA within 30 days of receipt for unused, resalable items in original packaging, with a 20% restocking fee and customer-paid return shipping unless Flatline erred; freight returns require coordination, clearance/garage-sale/final-sale items are excluded, and custom or made-to-order items may be non-returnable.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon