
Unaka Gear Co.
Ford Transit Side Mount Ladder - Medium Roof
Indexed listing. WNDR Built doesn't sell this product; the button opens unakagearco.com.
Roof access from the side of the Transit
This side-mounted ladder connects the roof rack to a lower body plate near the van’s rear wheel. The upper and lower ladder halves join before mounting, and the top attachment hangs from the rack’s side 8020 channel.
The rack connection stays loose while the installer positions the ladder and attaches its lower bracket. Unaka’s final adjustment step sets the ladder’s position before the remaining hardware is tightened. Standard and Premium rack installations use different upper-mount arrangements, detailed in Fitment.
Textured step plates
Unaka describes the updated step face plates as having a more aggressive, grippy surface.
Rung accessory mounts
Unaka Easy Mount holes on each rung provide attachment points for gear, storage and other accessories.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Unaka Gear Co.
2015+ Ford Transit Medium Roof with a Unaka Premium Rack, Unaka Standard Rack or DIY 8020 rack.
Standard or DIY rack adapter required
Unaka’s product page requires a separately purchased adapter kit for a Unaka Standard Rack or DIY 8020 rack; the adapter is not part of the ladder kit.
Body drilling required
The lower bracket attaches on the driver side behind the pinch weld near the rear wheel. Remove the factory plastic plug, drill 1/8 in pilot holes and enlarge them to 3/8 in, then deburr, clean and paint exposed metal.
Ladder use limits
Unaka says not to use the ladder without appropriate fall protection and personal protective equipment, during storms, when wet, under the influence of drugs or alcohol, or while the van is moving.
Roof-rack attachment
A roof rack is required: the ladder attaches to its side 8020 channel.
Torque checks
Unaka requires torque checks after 4–7 days, after one month, every 3–4 months thereafter, and after moderate driving on bumpy or gravel roads.
Specs, parts & installation
Assembly & attachment
| Sections | Upper and lower ladder halves |
|---|---|
| Rack fasteners | 5/16-18 roll-in T-nuts |
What’s in the box
Ladder & lower mount
One upper ladder half, one lower ladder half and one Transit body plate.
T-nuts & bolts
4 roll-in 5/16-18 T-nuts; 7 5/16-18 × 1 in hex bolts, one 5/16-18 × 1.25 in hex bolt and four 5/16-18 × 3/4 in button-head bolts.
Nuts, washers & lower bolts
Four 5/16-18 locknuts, 16 5/16 in washers and 9 5/16 in lock washers; two 3/8-16 × 1.25 in hex bolts, two 3/8-16 locknuts, four 3/8 in washers and two 3/8 in lock washers.
Installation at a glance
Installation requires a separate ladder; Unaka recommends a qualified professional or following its detailed instructions.
Join the ladder halves and tighten their joint to 11 ft-lb. Hang the ladder from the rack with its top hardware loose so it can slide during positioning.
Fit the lower body plate and connect the ladder to it, leaving the mounting hardware loose until final positioning; then tighten the hardware left loose to 11 ft-lb.
Tools and preparation listed by Unaka
- Separate installation ladder; 1/2 in box wrench, socket and wrench; 3/16 in hex key; torque wrench with 11 ft-lb capacity or higher and socket/Allen adapters.
- Drill with 1/8 in and 3/8 in bits; file or deburring tool, sandpaper, paint-cleaning/preparation materials and paint.
- Unaka suggests an optional dab of anti-seize on bolts paired with nylock nuts; anti-seize is not included.
- The lower-body bracket step also lists a 9/16 in wrench/socket.
Rack-specific mounting details
- Premium rack: insert the supplied roll-in T-nuts through the side-rail slot into the 8020 channel. Alternatively, remove the indicated lower side-rail screw(s) and slide the existing T-nut(s) into position.
- Standard or DIY 8020 rack: use the separate adapter kit with its adapter bracket at the upper attachment and its spacer between the lower ladder and the body/pinch plate. Leave hardware loose until the ladder manual’s tightening step.
- The Transit manual notes that the body lines are not exactly level, so final positioning may need adjustment.
Lead Time
Unaka’s Shipping Information excludes oversized items from free shipping, and its Shipping policy excludes items shipped by LTL freight.
This product
Unaka’s product page advertises free shipping on large Unaka products, including roof racks and ladders, to the Lower 48.
Warranty
Unaka-designed and fabricated parts have a defects warranty for the original purchaser during the product’s production lifetime; third-party kit components and wear parts are excluded, coatings have 180-day coverage, and modification or misuse voids the warranty.
Read Unaka Gear Co. warranty policy on WNDR BuiltReturns
The Refund policy’s Returns section requires an RMA, new condition, original packaging and freight-prepaid returns, with no refunds after 30 days from invoice and a minimum 10% fee if the customer covers shipping or 20% otherwise; its Terms & Conditions of Sale instead lists 15 days from receipt and a 15% fee. Custom, electronic, discontinued and specially priced items are excluded; the Sale terms also exclude opened or installed parts.
Read Unaka Gear Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Owner reports
Quotes from owners and installers, with links to where they were posted. These are owner reports, not manufacturer-confirmed information, and may describe a different van or year than yours. Verify before you buy.
excellent build quality, fit exactly as expected. fast shipping,
View originalSearches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon