
Flatline Van Co.
Winnebago Ekko Rear Ladder
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
A one-piece replacement for the factory rear ladder
Replace the factory rear ladder with a one-piece aluminum climbing structure. Flatline Van Co. supplies the ladder assembled, with a black powder-coated finish and stainless mounting hardware.
Cutouts leave additional mounting space at the rear. The ladder covers the mounting holes left by the factory unit; Flatline describes that coverage as providing a watertight seal. Follow the sealing and curing requirements in Fitment and the linked installation guide.
Tread and step
Flatline describes improved tread grip and a weight stability step.
Companion rear step
The optional Ekko Rear Bumper provides a lowered step to the ladder.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
Winnebago Ekko only: 2025+ Winnebago Ekko Sprinter (23B) and 2021+ Winnebago Ekko Transit (22A). Flatline’s page copy also describes it as engineered for the Sprinter (23B) and the Ford Transit AWD (22A) Ekko.
Drilling, sealing and curing
Drilling and sealing are required: marked holes are drilled through the rear wall and roof, the lowest holes are opened up to 39/64 in, and sealant goes on every hole. Let the sealant cure before climbing on the ladder. The guide also requires sealing the open factory holes.
Interior access and helper
The lowest mounts bolt through to backing plates inside the garage space; another person is needed for this step.
California Proposition 65
Flatline warns that this product can expose you to lead and lead compounds, DEHP and bisphenol A (BPA), which California identifies as causing cancer and birth defects or other reproductive harm.
Replaces factory part
Installs in place of the factory ladder. The guide removes the factory ladder and roof sealant, and it says to find a mounting position that does not interfere with other rear accessories or overlap the factory holes.
Companion parts
Works with or without the Flatline Ekko Rear Bumper, platform and tire carrier; none of them is required.
Installer requirement
Flatline recommends professional installation generally. If you have no mechanical experience and are not thoroughly familiar with the installation procedures, a professional installer or other qualified person must install the product.
Before use
Check mounting points and attachments before use, and regularly inspect the product for wear or damage, as required by Flatline’s guides.
Specs, parts & installation
Construction & finish
| Materials | All-aluminum construction with stainless steel hardware |
|---|---|
| Finish | Black exterior powder coat |
| Construction | One-piece weldment, no assembly |
Installation time
| Time | Flatline’s guide lists 2 hours; the product page says under 2 hours. |
|---|
What’s in the box
Ladder & mounting parts
Ladder weldment; eight ladder tube spacers and two backing plates.
Hardware
Bolts, locknuts, washers, self-drilling screws and blind rivets for the roof, wall and garage-space mounts.
Installation at a glance
Flatline’s guide lists 2 hours; the product page says under 2 hours.
Remove the factory ladder, drill and seal the new mounting holes, and attach the ladder to the roof, rear wall and garage-space backing plates.
Installation sequence and tools
- Flatline’s guide lists about 2 hours
- Remove the roof sealant and factory ladder, clean the surfaces, dry-fit the new ladder and mark its holes
- Drill pilot holes in the rear wall and roof, step the lowest holes up to 39/64 in for the tube spacers, and seal every hole
- Rivet the ladder to the roof with a rivet tool, screw the upper and middle holes into the rear wall with the self-drilling screws, and bolt the lowest holes through to backing plates inside the garage space, which takes a second person
- Seal around the mounting plates and let the sealant cure before use
- Tools listed include a power drill, bits from 3/16 to 39/64 in, a rivet tool, 5/16 and 7/16 in sockets and a 5/32 in Allen wrench.
Lead Time
Flatline Van Co. says in-stock items ship within 1–2 business days from its Arizona warehouse. Items sent by LTL freight typically take 7–21 business days to arrive. Its FAQ says shipping is free to the lower 48; its Shipping policy lists flat-rate shipping and possible free economy shipping with longer lead times.
Read Flatline Van Co. lead time policy on WNDR BuiltWarranty
One-year limited warranty from the original purchase date for the original purchaser, covering product cost only. It excludes installation, labor and freight, and damage from racing, competition or trail use, and is void for alteration, modification or improper installation.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Returns are accepted within 30 days of receipt with a pre-authorized RMA number, for unused items in resalable condition and original packaging. A 20% restocking fee applies, and the customer pays return shipping unless the return is due to Flatline’s error; LTL freight returns must be coordinated with Flatline. Clearance, garage-sale and final-sale items are not returnable, and custom or made-to-order items may also be non-returnable.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon