
Aluminess
Side Ladder - 2015-26 Ford Transit
Indexed listing. WNDR Built doesn't sell this product; the button opens aluminess.com.
Driver-side access to your Transit roof rack
Aluminess’s Transit Side Ladder provides a driver-side route to the roof rack. It mounts at the rack and the vehicle’s lower pinch weld, so roof access does not depend on drilling through a rear door.
The ladder sits away from the van’s body to leave space for climbing while following the side of the vehicle. Its upper attachment uses pipe clamps, with a separate installation section for the Recon rack.
Aluminum construction
The ladder is made from aluminum.
Rack-specific attachment
The guide includes standard-rack and Recon-rack installation sections.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Aluminess
- 2015–26 Ford Transit.
- The maker also lists 2015–2026 Transit-150, Transit-250, Transit-350 and Transit-350 HD.
Drilling required
The ladder avoids rear-door drilling, but the guide requires drilling at the vehicle pinch weld to fasten the supplied mounting plate.
California warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Roof configuration
Choose With Medium Roof, With High Roof or With Low Roof to match the van.
Required roof rack
An Aluminess Roof Rack is required and must be installed before positioning the ladder. For a standard rack, mount the ladder to the loop with flooring; if the flooring is on the lower loop, mount to the lower loop.
Ladder position
Installs between the rear wheel and driver door. If fitting nerf bars with the ladder, it must be directly in front of the rear tire.
Converted vehicles
Aluminess designs its products for factory-manufactured vehicles; some aftermarket conversions are incompatible.
Specs, parts & installation
Construction & mounts
| Material | Aluminum |
|---|---|
| Distance from van | Aluminess states: about 5" |
| Top mounting bracket | 1-5/16" pipe clamp |
| Flat mounting plate | 4” x 9” |
Shipping package
| Height | 11 IN. |
|---|---|
| Width | 92 IN. |
| Depth | 16 IN. |
| Weight | 21 LBS. |
What’s in the box
Lower mount
One flat mounting plate.
Hardware
Five 1/4-20 x 1" button-head Allen bolts, five 1/4-20 Nylock nuts, ten washers and one 2g anti-seize packet, as listed in the guide.
Installation at a glance
The guide requires two people.
Install the roof rack first, then loosely fit the upper pipe clamps using the matching standard-rack or Recon-rack instructions. Remove the lower plastic trim to access the pinch weld and drill to attach the mounting plate with three bolts.
Refit the trim and use the remaining two bolts to attach the ladder to the plate, then tighten the upper and lower hardware. The guide recommends anti-seize on stainless bolt threads.
Verify that hardware remains tight after the first 100 miles and check periodically thereafter.
Tools listed in the guide
- Standard wrench set.
- Drill ¼” bit.
- Vise grips or clamp.
Recon upper attachment
- Loosely fasten the pipe clamps between the rack side rails, with the top clamp bolt through the top rail slot as illustrated in the guide.
- Complete the lower pinch-weld mounting-plate installation and tighten the hardware.
Lead Time
Read Aluminess lead time policy on WNDR BuiltWarranty
Read Aluminess warranty policy on WNDR BuiltReturns
Read Aluminess returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon