
Shuksan Vans
Ascent Series Roof Rack - Sprinter
Indexed listing. WNDR Built doesn't sell this product; the button opens shuksanvans.com.
Roof coverage with integrated lighting
The Shuksan Vans Ascent roof rack combines a crossbar platform with six integrated lights for use after sunset. Its vent-area crossbar assemblies extend the usable roof area around the vent, rather than leaving that section open. Laser-cut decking is an optional addition.
The rack offers upper and lower crossbar positions, plus a rear fairing and an extra crossbar for elevating gear. A rear roller bar runs on flanged bearings. The side rails, fairings, roller bar, crossbars and optional decking are aluminum, with a mini-texture black powder-coated finish.
White and amber lighting
Six Diode Dynamics SS3 lights combine four white lights and two amber lights. Shuksan Vans states that the six lights produce over 13,000 lumens.
Vent-area layout
The rack has separate crossbar assemblies for front-vent and rear-vent layouts.
Made in Washington
Shuksan Vans states that the rack is manufactured and assembled in the Pacific Northwest.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Shuksan Vans
- Mercedes Sprinter High Roof 144: 2019+, following the Ascent Sprinter 144 installation guide.
- Mercedes Sprinter High Roof 170: 2007+, as listed on the product page.
Choose the van model
Match the model option to your high-roof Sprinter.
Sprinter High Roof 144
- 144 model
Sprinter High Roof 170
- 170 model
Choose the vent location
Select the layout for your vent position.
Vent in Front
- Front-vent crossbar assembly
Vent in Back
- Rear-vent crossbar assembly
Choose decking
Both decking options are listed for each model and vent layout.
No Decking
- Rack without optional decking
Fully Decked
- Rack with laser-cut aluminum decking
Light wiring required
Wiring is left to the installer. Included pigtails require a harness with a relay or a controller such as an Auxbeam Controller or an sPod Controller.
Hand-tighten only
The Sprinter 144 guide requires hand-tightening with a wrench; do not use an impact driver.
Roof rails
Compatible with factory and aftermarket roof rails.
Accessory compatibility
Compatible with the Fiamma F45S awning and Shuksan Side Ladder; the ladder is sold separately.
Specs, parts & installation
Construction
| Rack components | Aluminum side rails, front and rear fairings, roller bar, crossbars and optional decking |
|---|---|
| Finish | Mini-texture black powder coating |
| Roller bar bearings | The Sprinter 144 guide lists flanged bearings under bright stainless finish. |
| Hardware finishes — Sprinter 144 guide | Bright stainless and black oxide; aluminum roof-rail pucks with stainless inserts |
Lighting
| Lights | 6 Diode Dynamics SS3 lights: 4 white, 2 amber |
|---|---|
| Output | Shuksan Vans states over 13,000 lumens from the six lights |
What’s in the box
Rack and lighting
Side rails, front and rear fairings, full-width crossbars, vent-area crossbar assembly, roller bar, six lights and light pigtails.
Sprinter 144 rack parts — guide quantities
Two front side rails, two rear side rails, one front fairing, one rear fairing, two 54” front fairing bars, one roller bar and six light pigtails. The guide also lists mounting hardware, roof-rail pucks and the 5/32 and 5/16 hex wrenches.
Sprinter 144 vent-layout parts
Vent in Front: four 16” vent crossbars and two 28” vent bars. Vent in Back: six 16” vent crossbars and two 38” vent bars.
Optional Sprinter 144 decking — guide quantities
Nine 10” X 54” decking panels, two 17” X 30” panels, 88 button-head bolts, 88 flat washers and 88 drop-in T-nuts.
Installation at a glance
The Sprinter 144 guide says an extra set of hands is helpful but not required.
Preassemble the fairings and vent crossbar assemblies on a sturdy surface, then mount the rack to the roof rails with the supplied pucks and hardware. The guide calls for Loctite during assembly and installation.
Protect the van with a blanket, cardboard or an old yoga mat. The front fairing assembly may be heavy; take precautions while installing it.
Sprinter 144 tools listed in the guide
- 5/32 hex wrench and 5/16 hex wrench, both shown as provided in the kit.
- 7/16” wrench, socket or crescent.
- 3/4” wrench, socket or crescent.
Sprinter 144 roof-rail positioning
- Slide eight rail pucks into each roof rail, with the “UP” sticker facing the sky.
- With factory roof rails, slide the forward-most puck against the small black post.
- If you do not have factory roof rails, position the forward edge of the forward-most puck 8.5” from the front roof seam; the guide refers to the video for details.
Sprinter 144 assembly sequence
- Assemble the front fairing and light brackets, rear fairing and the matching front-vent or rear-vent crossbar assemblies.
- Fit the front side rails and first crossbar, then the front fairing and remaining crossbars for the selected vent layout.
- Fit the rear side rails, roller bar and rear fairing. Press-fit the roller bar onto its bearings; if it will not press-fit readily, the guide directs installing and tightening the rear fairing to draw the side rails together.
- Tighten the fairing and crossbar bolts first, then the side-rail foot bolts.
Optional Sprinter 144 decking
- Starting at the front or rear, loosely lay down the first 10” X 54” panel and fit drop-in T-nuts at its small holes.
- Use 0.5” black oxide bolts, flat washers and Loctite; loosely attach all bolts on each panel before tightening.
- Repeat along the full-width crossbar sections; use the 17” X 30” panels at the vent crossbar area.
Source notes
- Shuksan Vans’s product page lists 2007+ high-roof Sprinter fitment; its Ascent Sprinter 144 guide is titled 2019+. This listing follows the guide for the 144 model.
- Shuksan Vans’s product page lists 13 full-width crossbars for the Sprinter 144; the guide’s package table lists 13 for Vent in Front and 12 for Vent in Back.
- The Sprinter 144 guide’s package table lists 13 full-width bars for Vent in Front and 12 for Vent in Back; steps 2a, 4c, 6a and 7c specify 1, 1, 3 and 7 bars for Vent in Front, or 1, 1, 5 and 4 for Vent in Back. The disputed counts are omitted.
- Shuksan Vans’s product page says all hardware is stainless steel; its Sprinter 144 guide identifies both bright stainless and black oxide hardware. This listing follows the guide.
- Shuksan Vans’s product page describes ABS roller-bar bearings; page 8 of its Ascent Sprinter 144 guide lists flanged bearings under bright stainless finish. This listing follows the guide for the 144 model.
Lead Time
Free shipping over $99 to the lower 48; import duties and fees are customer responsibility.
Read Shuksan Vans lead time policy on WNDR BuiltWarranty
Read Shuksan Vans warranty policy on WNDR BuiltReturns
30 days after receipt; 25% restocking fee; custom work, sale items, and gift cards excluded.
Read Shuksan Vans returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon