
Roambuilt
Mercedes Sprinter (2019-Current) Full Guard Front Bumper
Indexed listing. WNDR Built doesn't sell this product; the button opens roambuilt.com.
A full-guard bumper with recovery and lighting mounts
The Full Guard bumper combines an aluminum shell and guard tubes with a steel winch cradle and steel shackle mounts. Internal ribbed gussets, vertical and horizontal gusseting, and wrap-around steel frame brackets reinforce the structure. Roambuilt describes the bumper as providing frontal DEF tank protection for on- and off-road use.
Large hand cutouts give access to the winch and a view of its line. Four square light pockets provide positions for LED lights, and an integrated front receiver adds another attachment point.
Sensor provisions
Pre-cut sensor holes and housings accommodate the vehicle’s sensors; sensor cap deletes are included.
Skid-plate pairing
The bumper is compatible with Roambuilt’s skid plate.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Roambuilt
- Mercedes Sprinter Van: 2019–2025, including 2500, 3500, 2WD and 4x4 models, subject to the checks below.
- Roambuilt also names Revel, Storyteller, EKKO and GH1 builds.
2025 Sideguard Assist exclusion
Before ordering for a 2025 van, verify whether a Sideguard Assist sensor is on the passenger-side front corner beneath the headlight. If that sensor is present, this bumper is not compatible; Roambuilt requires the LoPro bumper instead.
Required brackets and frame drilling
2WD and Sprinter 3500 dually installations require Roambuilt frame brackets. The 3500 requires DEF tank removal to drill holes in the frame. Roambuilt directs buyers to Sales at 480.674.0001 for details.
Retain the blue piece
For 2025+ model year vans, Roambuilt requires keeping the blue piece for installation; the last product image identifies it.
If removing factory fog lamps
For 2019+ Sprinters with the factory fog lamps eliminated during bumper replacement, Roambuilt’s FAQ describes cutting the factory fog-lamp wiring and connecting a 50w 5ohm resistor to address the warning. Turn the vehicle off and disconnect the battery first; the resistor gets hot and must be kept away from other wiring.
Winch and shackle compatibility
Roambuilt lists Warn VR-EVO and Warn 12k Zeon series winches, up to 12k, and ¾” shackles.
Lighting compatibility
Four square light pockets are listed as compatible with most LED lights; Roambuilt recommends Diode Dynamics SS5 White Sport and SS5 Yellow Sport.
Vehicle systems
Roambuilt states that the bumper works with Cruise Control and Active Brake Assist.
Specs, parts & installation
Shell and guard
| Shell | 3/16" 5052 aluminum |
|---|---|
| Center guard tube | 2 3/8" aluminum |
| Outer guard tubes | 2" |
| Winch cradle and shackle mounts | Steel |
| Finish | Black textured powder coat |
| Weight | 149 lbs |
| Origin | Made in the USA |
Attachment points
| Receiver hitch | 2” |
|---|---|
| Light pockets | Four square pockets |
What’s in the box
Bumper and sensor provisions
Full Guard front bumper with pre-cut sensor holes and housings, plus sensor cap deletes.
Installation at a glance
Bolts directly to the frame and uses frame extensions.
The product page describes wrap-around steel frame brackets; vehicle-specific required brackets, drilling and retained-part conditions are listed in Fitment.
FAQ procedure when eliminating factory fog lamps
- With the vehicle off and battery disconnected, remove the factory bumper and leave the fog lamps hanging from the harness.
- Cut the wiring harness just behind the factory fog-lamp plug, remove the protective tape and bare the two wire ends.
- Connect a 50w 5ohm resistor between the two leads; the FAQ prefers soldering but also describes terminal connectors or matching-rating resistors with leads and crimp-style wire taps.
- Secure the resistor inside the replacement bumper with 3M VHB double-sided adhesive, out of the weather and away from other wiring because it gets hot.
- Once the remaining sensors are installed, turn on the ignition so the running lights come on and check that no fog-lamp warning remains.
Lead Time
Flat-rate shipping to the lower 48; large residential deliveries add a $200 lift-gate fee; international shipping is sometimes possible by special request.
Read Roambuilt lead time policy on WNDR BuiltWarranty
Lifetime structural coverage for the original purchaser; powder coat covered for 60 days.
Read Roambuilt warranty policy on WNDR BuiltReturns
Returns within 30 days after delivery; 30% restocking fee and inspection apply.
Read Roambuilt returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon