
Black River
Side Mount Ladder
Indexed listing. WNDR Built doesn't sell this product; the button opens blackriverbysummit.com.
Roof access along the side of your van
The Side Mount Ladder gives you a way to reach rooftop cargo, storage boxes and solar panels from alongside the van. Its contour-following shape places the ladder at the side rather than on the rear doors. Black River describes this layout as helping preserve rear-door functionality and exterior space.
The ladder is intended for tasks such as loading roof-rack gear, maintaining solar panels and reaching camp equipment. Upper and lower sections bolt together to form the ladder, with attachments at roof level and the lower pinch weld. The two vehicle versions use different upper mounting hardware.
Non-slip steps
Black River lists non-slip steps and a climbing grip.
Weather-resistant coating
The ladder has a weather-resistant finish for exterior use.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Black River
- Mercedes Sprinter
- RAM Promaster with a Black River Roof Rack
Choose the vehicle version
The upper mounting method differs by vehicle.
Mercedes Sprinter
- Upper bracket hooks attach to the Mercedes roof rail using two quarter-turn bolts, washers and M6 nuts.
- The Sprinter guide requires the Mercedes roof rail as the upper attachment point.
RAM Promaster (Must have Black River roof rack)
- Requires a Black River Roof Rack.
- Three T-bolts attach the upper bracket to the roof-rack rail.
Drilling required
Both guides require two 1/8" pilot holes enlarged to 3/8" through the lower pinch weld. Paint the raw metal edges with bare metal primer.
Mounting location
Both installation guides place the ladder between the front and rear axle. Keep it straight and check placement before permanent mounting so it does not bind or interfere with surrounding components, the fuel door, window operation or cassette toilet door operation.
Specs, parts & installation
Design & finish
| Ladder assembly | Upper and lower sections bolt together. |
|---|---|
| Finish | Weather-resistant coating |
| Steps | Non-slip steps |
What’s in the box
Ladder sections
Upper and lower ladder sections, as shown in the matching installation guide.
Sprinter hardware — manual parts list
Two quarter-turn bolts; two M6 x 1 nylock nuts; two 5/16" - 18 carriage bolts; two 5/16" - 18 nylock nuts; four flat washers; four 5/16" - 18 button head cap screws.
Promaster hardware — manual parts list
Three 5/16-18 T-slot bolts; two 5/16" - 18 carriage bolts; five 5/16" - 18 nylock nuts; five flat washers; four 5/16" - 18 button head cap screws.
Installation at a glance
Both guides recommend moderate mechanical skill.
Bolt the ladder sections together, attach the upper bracket to the matching roof rail or roof-rack rail, and fasten the lower bracket through the pinch weld after drilling and priming the holes. Read the guide for the selected vehicle below.
Tools listed in both guides
- Ladder
- Drill with standard drill bits up to 1/2"
- 1/2" wrench
- 3/16" Allen wrench
- 1/2" socket; the Sprinter guide also lists a 10MM socket.
Installation sequence from both guides
- Align the upper and lower ladder sections and connect them using two 5/16" button head cap screws and a 3/16" Allen wrench.
- For Sprinter, install the two quarter-turn bolts, washers and M6 nuts on the upper bracket hooks and set the ladder on the Mercedes roof rail. For Promaster, install the three T-bolts into the roof-rack rail, set the ladder in position and start the washers and nuts.
- Confirm placement and clearance before marking the two lower mounting holes.
- Move the ladder aside, drill the pinch weld as specified above and prime the raw metal edges.
- Move the ladder back, insert the two 5/16" carriage bolts through the lower bracket and pinch weld, tighten the lower lock nuts and washers, then tighten the upper bracket nuts.
Lead Time
Rebel Box, Rebel HB and Matrix: manufacture up to 8 weeks, plus transit; other products: receipt up to three weeks. Destination terms conflict.
Read Black River lead time policy on WNDR BuiltWarranty
Published warranty lengths conflict with the blanket one-year FAQ; MATRIX registration is required within 30 days of delivery, before discovery of a warranty issue.
Read Black River warranty policy on WNDR BuiltReturns
Returns within 30 days; 20% restocking fee; ordinary returns have customer-paid freight; approved error/defect/wrong-product freight returns have Black River-paid shipping; freight eligibility conflicts; custom goods excluded except Black River error.
Read Black River returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon