
Aluminess
Weekender Roof Rack - Sprinter - 2007-26 Sprinter
Indexed listing. WNDR Built doesn't sell this product; the button opens aluminess.com.
A roof-top basket for cargo and a place to sit
The Aluminess Weekender adds a roof-top place for cargo boxes, surfboards or time spent lounging above a Sprinter. Its double-loop, low-profile basket comes with a choice of flooring, so the deck can be selected around how it will be used.
Aluminess describes slatted flooring as walkable and suited to tying down cargo. The perforated version is presented as a platform for lawn chairs, tripods or sleeping. The rack is made from aluminum pipe. Available mounting and flooring combinations depend on the vehicle configuration.
Aluminum pipe
Built from 1" aluminum pipe with a 1.315" Outside Diameter.
Vent clearance
Aluminess describes custom cuts for vent clearance.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Aluminess
- 2007-2025 Mercedes-Benz Sprinter
- 2010-2026 Mercedes-Benz Sprinter 2500
- 2010-2026 Mercedes-Benz Sprinter 3500
- 2018-2026 Mercedes-Benz Sprinter 3500XD
- 2019-2025 Mercedes-Benz Sprinter 1500
- 2019-2025 Mercedes-Benz Sprinter 4500
Choose the flooring
Aluminess describes these uses for the full-floor versions.
Slats
- Walkable flooring for tying down cargo.
Perforated
- A platform for lawn chairs, tripods or sleeping.
Optional air dam
The maker offers None or an air dam sized by roof height.
Small
- Fits Sprinter High Roof.
Large
- Fits Sprinter Low Roof.
Satellite antenna interference
Roof racks and accessories may interfere with factory roof-mounted satellite antennas. Antenna relocation may be required for full satellite radio functionality.
Two-person installation
The linked track-mount guide requires two people.
Vehicle weight limit
The track-mount guide requires referring to the vehicle manufacturer’s recommended maximum weight rating before operating the vehicle.
Track-mount fasteners
Apply anti-seize to the threaded inserts. The installation step specifies only 6 ft-lbs. of torque; do not over-tighten.
Available combinations
- 144" · With Low Roof: Track Mount / Slats, Track Mount / Perforated, Penthouse Top Mount / Half Perforated, Penthouse Top Mount / Full Perforated.
- 144" · With High Roof: Track Mount / Slats, Track Mount / Perforated.
- 170" · With High Roof, With Regular Body: Track Mount / Slats, Track Mount / Perforated.
- 170" · With High Roof, With Extended Body: Track Mount / Slats, Track Mount / Perforated.
Roof rails
Aluminess’s product page states that stock or aftermarket roof rails are required on all Sprinter models. The linked track-mount guide requires factory or aftermarket roof tracks to be installed before the rack.
Conversions and accessories
Aluminess designs its products for factory-manufactured vehicles. Some aftermarket conversions are incompatible; Aluminess does not guarantee fitment with aftermarket accessories or modified vehicles. Determine fitment before purchase.
Use and vehicle codes
Aluminess states its products are designed for off-road vehicle use. The purchaser must determine suitability for the intended use and compatibility for on-road and off-road travel, and review applicable vehicle codes before purchase.
Specs, parts & installation
Construction
| Material | Aluminum |
|---|---|
| Pipe size | 1" pipe; 1.315" Outside Diameter |
Shipping package
| Shipping height | 68 IN. |
|---|---|
| Shipping width | 140 IN. |
| Shipping depth | 16 IN. |
| Shipping weight | 230 LBS. |
What’s in the box
Track-mount hardware
The track-mount guide lists stainless steel fender washers, stainless steel nylock nuts, threaded inserts and one 2g anti-seize packet.
Track-mount quantities
For 6 / 8 / 10 mounting feet respectively: 12 / 16 / 20 washers, 12 / 16 / 20 nuts and 6 / 8 / 10 threaded inserts.
Supplemental hardware
Depending on rack size, extra hardware may be packed in a bag labelled “SUPPLEMENTAL KIT”; check the original packaging if there are feet left to fasten.
Installation at a glance
The linked track-mount guide requires two people.
Install onto pre-installed roof tracks using threaded inserts, washers and nylock nuts. Apply anti-seize and tighten the mounting nuts to the guide’s specified 6 ft-lbs.; do not over-tighten.
Track-mount tools
- Standard wrench set.
- Leveling tool.
Track-mount sequence
- Slide threaded inserts into the pre-installed roof tracks from the rear.
- Lower the rack so the studs align with the mounting feet, then slide it into position.
- The guide describes normal positioning with the back of the rack parallel to the vehicle’s rear curvature.
- Apply anti-seize, then fit washers and nylock nuts and tighten as specified.
Lead Time
This product
Aluminess’s Warranty/Shipping Information page states that roof racks ship LTL freight and do not qualify for free shipping.
Warranty
This product
Aluminess’s linked track-mount guide excludes threaded inserts from warranty coverage; replacement inserts are available at additional cost.
Returns
This product
Aluminess’s Refund Policy classifies all roof racks as special orders, refundable only if a new buyer is found.
What are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon