
DVA Mechanics
Mercedes Sprinter: LoadSpan-T™ Roof Rails with L-Track & 25mm T-Slot
Indexed listing. WNDR Built doesn't sell this product; the button opens dvamechanics.com.
Two mounting standards along one roof rail
LoadSpan-T is DVA Mechanics’ front-to-back roof rail system for combining cargo tie-downs with bolt-on roof equipment. Instead of adding a secondary track to change mounting standards, the rail integrates L-Track and 25mm T-Slot channels in one profile.
DVA describes the rail’s rigid, interlocking sections as a shared load path: forces are spread along the rail and into multiple factory roof mounting locations. The design is intended for builds that use crossbars, solar mounts or rack hardware alongside L-Track cargo fittings. This is the dual-standard version of DVA’s L-Track-only LoadSpan rail.
Anodized aluminum
The product page specifies anodized 6061-T6 aluminum.
M6 and M8 slider hardware
DVA lists support for accessories designed for OEM and third-party rails using standard M6 and M8 slider hardware.
Cargo-roof working limits
DVA’s product page and the Mercedes-Benz 907 guideline table give 331 lb (150 kg) dynamic for Standard and High cargo roofs; DVA lists 661 lb (300 kg) static when parked level.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by DVA Mechanics
- Mercedes-Benz Sprinter (VS30 chassis, 2019–Present); Cargo and Passenger variants.
- 144" / 170" / 170" Extended; Standard and High roofs.
Choose your Sprinter length and color
Match the length to your van; DVA offers Silver and Black for each of the three listed lengths.
144"
- Sprinter 144" - Silver
- Sprinter 144" - Black
170"
- Sprinter 170" - Silver
- Sprinter 170" - Black
170" Extended
- Sprinter 170" Extended - Silver
- Sprinter 170" Extended - Black
Earlier Sprinters excluded
Not compatible with NCV3 (2007–2018) Sprinters; the FAQ also excludes 2018 and earlier models.
Super High and other roof variants
DVA requires direct fitment confirmation before ordering for Super High and other roof variants.
Interior access required
The rails use the VS30 factory roof-rail attachment locations without new roof holes, but interior access is required to secure the through-fastened hardware. Plan headliner and trim access before ordering; DVA’s guide says a generic rivnut method is not the LoadSpan-T installation.
Vehicle and system load limits
LoadSpan-T does not increase the Mercedes-Benz vehicle roof limit. Carrier and accessory mass count, the load must be evenly distributed through the documented carrier system, and the exact vehicle/build documentation controls; use the lowest documented limit in the complete roof system. The Mercedes-Benz guideline bases its roof-load figures on factory C-rails (code D13) used with a carrier system designed for that roof load.
Select the van length
Select the correct Sprinter length: 144, 170 or 170 Extended. DVA says to add roof type and model year in the order notes if confirmation is needed.
Accessory compatibility
The channels accept L-Track fittings and 25mm T-Slot hardware simultaneously, without adapters between these two mounting standards. DVA asks buyers to contact it to verify their specific roof-rack, cargo-box or solar-panel setup.
Installer choice
DVA’s linked installation guide recommends a professional when cabinetry, insulation, wiring, airbags or finished headliner obstruct the attachment path; when the product revision, fastener stack, sealing method or structural condition is uncertain; or when corrosion, prior holes, water entry or repaired roof structure is present.
Roof-carrier layout
The linked Mercedes-Benz guideline requires evenly distributed roof loads and regularly spaced support feet, with proportionally reduced loads for shorter racks. Its basic recommendation is 50 kg/110 lbs per pair of feet and strut. Its roof-bow table lists ≥ 5 bows for 3665 mm/144 in and ≥ 6 bows for 4325 mm/170 in.
Cargo-roof working limits
For Standard and High cargo roofs, this listing uses 331 lb (150 kg) dynamic, as stated by DVA’s product page and the Mercedes-Benz 907 guideline table, and 661 lb (300 kg) static parked level, as stated by DVA. Use the lowest documented system limit; carrier and accessory mass count.
Specs, parts & installation
Rail construction
| Material | Anodized 6061-T6 aluminum |
|---|---|
| Channel | Full-length L-Track + 25mm T-Slot |
| Rail sections | Rigid interlocking sections; DVA lists 2–3 per side. |
| Colors | Silver or Black |
Length and weight by Sprinter version
| 144" rail length | 113.3 in / 287.8 cm |
|---|---|
| 144" listed weight | 3.8 kg / 8.4 lb |
| 170" rail length | 158.5 in / 402.6 cm |
| 170" listed weight | 5.1 kg / 11.3 lb |
| 170" Extended rail length | 173.5 in / 440.7 cm |
| 170" Extended listed weight | 5.6 kg / 12.3 lb |
Cargo-roof working limits
| Standard and High cargo roofs, dynamic | DVA’s product page and the Mercedes-Benz 907 guideline table state 331 lb (150 kg). |
|---|---|
| Standard and High cargo roofs, static | DVA’s product page states 661 lb (300 kg), parked level. |
What’s in the box
Rails and end caps
All required front-to-back LoadSpan-T rails for the selected Sprinter length, plus end caps.
Mounting and sealing
Complete mounting hardware kit and butyl tape for sealing the mounting points.
M8 sliders
4 × M8 single-hole sliders and 4 × M8 four-hole sliders.
Installation at a glance
DVA’s product page estimates 60–90 minutes with basic hand tools and describes the installation as reversible.
The linked installation guide says to map the factory attachment locations and interior obstructions, remove or lower interior material for access, and dry-fit the rail and accessory layout before final sealing.
Use the hardware, sealing method, fastener sequence and inspection steps in the current DVA instructions for the exact rail revision.
Before mounting cargo, inspect every attachment and seal from both exterior and interior, and follow the current product instructions for final tightening and reinspection.
After the first weather exposure, check the interior attachment path for water entry; after the first loaded drive, inspect the rails, crossbars and accessory restraints again.
Source notes
- DVA’s roof-rail installation guide lists 661 lb dynamic for a Standard-roof cargo van and 331 lb dynamic for a High-roof cargo van; its product page lists 331 lb (150 kg) dynamic for both roofs.
- The linked Mercedes-Benz 907 guideline, Edition 2025-6, page 81 table lists LH1/LH2 at 150 kg/331 lbs dynamic; page 129’s roof-hatch/pop-up-roof section lists Cargo van LH1 at 300 kg/661 lbs and High-roof cargo van LH2 at 150 kg/330 lbs.
- This listing uses the lower 331 lb (150 kg) dynamic working figure for both Standard and High cargo roofs; the installation guide’s 661 lb Standard-roof dynamic figure is unconfirmed.
- DVA’s product page and installation guide list 661 lb static for both cargo roof heights when parked level.
Lead Time
Free U.S. shipping; in-stock dispatch target: 48 hours; homepage processing: 1–2 business days, typical U.S. delivery: 2–5 business days after shipment.
This product
DVA’s product page lists free continental U.S. shipping, processing in 1-2 business days and U.S. delivery in 2-5 business days.
Warranty
Limited warranty from delivery, in years: electronics, 1; non-electronic products, 3; normal use and proper installation required.
This product
DVA’s LoadSpan-T product page states a limited lifetime structural warranty covering the extrusion and mounting structure for as long as you own it, plus manufacturing-defect coverage.
Returns
DVA accepts eligible return requests within 30 days of delivery; return shipping is paid by the customer except for DVA errors.
Read DVA Mechanics returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon