
Dark Star Offroad
Mercedes Sprinter Rear Tug Step
Indexed listing. WNDR Built doesn't sell this product; the button opens darkstaroffroad.com.
Rear access with recovery attachment points
The Rear Tug Step provides a platform at the Sprinter's rear cargo area and incorporates recovery attachment points into its mounting brackets. It is designed to sit close to the bumper; Dark Star Offroad says this positioning minimizes its effect on departure angle.
The design retains use of the factory hitch and complements the maker's side steps. The bracket attachment points accept recovery shackles, which are sold separately from this rear-step listing.
Step and recovery brackets
The mounting brackets combine step support with integrated shackle attachment points.
Bumper-close position
Dark Star Offroad says the step tucks close to the bumper to minimize its effect on departure angle.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Dark Star Offroad
Fits 2019+ Sprinter · AWD / 4x4 · 144 / 170 / 170 EXT · with the OEM rear hitch.
Factory hitch required
This step will not work without the factory rear hitch installed.
Factory step and wiring-harness preparation
If the factory hitch has a passenger-side step, remove it before installing the brackets. If a wiring-harness zip tie passes through a mounting hole, cut that zip tie.
Shackles sold separately
Recovery shackles are not included with this rear-step product.
Hitch access
The product page says the factory (OEM) hitch remains usable.
Recovery attachment
The product page specifies attachment points for 3/4" recovery shackles with a 7/8" pin. The guide describes the recovery points as designed for steel or soft shackles.
Specs, parts & installation
Recovery attachment
| Shackle size listed on product page | 3/4" recovery shackles with a 7/8" pin |
|---|
What’s in the box
Step & brackets
One Rear Tug Step, one driver rear bracket and one passenger rear bracket.
Bracket fasteners
Four 1-¾” flange bolts, four ½” washers and four nylon-insert nuts.
Deck fasteners
Six 1” black countersunk bolts, six washers and six nylon-insert nuts.
Documentation
Installation instructions.
Installation at a glance
No drilling is required, according to the product page.
The guide mounts the brackets through existing OEM hitch holes, then attaches the step deck to the brackets.
Bracket and deck attachment from the maker guide
- If the factory passenger-side step is present, remove its three bolts with a ⅝” socket/wrench; the removed step and hardware are not reused.
- Position the brackets with the bends facing outward and pass two flange bolts per side through the OEM hitch and bracket, bolt heads on the inside.
- Add washers and nylon-insert nuts on the bracket side; the guide specifies 100 ft/lbs.
- Place the deck on the brackets with its bend mirroring the factory bumper; use three countersunk bolts per bracket, with washers and nylon-insert nuts underneath.
- The guide says to tighten the deck fasteners until snug — 6 ft/lbs.
Tools listed by Dark Star Offroad
- ¾” socket/wrench
- 7/16” socket/wrench
- 3/16” Allen key
- ⅝” socket/wrench if removing the factory step
Lead Time
Read Dark Star Offroad lead time policy on WNDR BuiltWarranty
Read Dark Star Offroad warranty policy on WNDR BuiltReturns
New, unused parts may be refunded after return and inspection; return shipping is not covered.
Read Dark Star Offroad returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon