
Tec Vanlife
Sprinter Rear Door Aluminum Gear Rack - No Drill
Indexed listing. WNDR Built doesn't sell this product; the button opens tecvan.com.
A no-drill mounting platform for the passenger-side rear door
Tec Vanlife lists a no drill aluminum rear door gear rack for Mercedes Sprinter vans, offered in 580 mm and 500 mm widths as a base rack or with modular panels. It provides a mounting base for exterior equipment on the passenger-side rear door.
The rack attaches at the factory hinges and uses the OEM Mercedes badge openings as a third anchor point. A lower door clamp distributes and stabilizes the load without drilling or permanent body modifications. The narrower option leaves more room around the door handle; either width keeps the handle accessible.
Attachment slots
L-track holes and slotted rails for attaching storage boxes, bike carriers, fuel containers, and other rear door equipment.
Frame construction
Extruded aluminum frame.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Tec Vanlife
Mercedes Sprinter, 2019+, equipped with 180° rear door hinges only.
Choose the rack width
The maker bases the width choice on door-handle clearance.
500 mm
- Leaves the door handle fully exposed.
580 mm
- Partially covers the door handle, leaving approximately half exposed; the handle remains accessible.
Choose the rack configuration
Either width is offered with these add-on selections.
Base Rack
- Base rack configuration.
With Modular Panels
- Rack with modular panels.
Accessory clearance
Maker states clearance should be checked against the size of the accessories mounted so taillights remain visible and sensors are unobstructed.
Hinge mounting check
The guide requires each rear-door hinge to have two exposed mounting holes on the outside.
Hinge restriction
Vehicles with 270° hinges can be converted by replacing the hinges using parts available from Mercedes-Benz dealers.
Side restriction
Passenger side only; the rack cannot be mounted on the driver side.
Available combinations
580 mm / Base Rack; 580 mm / With Modular Panels; 500 mm / Base Rack; 500 mm / With Modular Panels.
Specs, parts & installation
Frame and capacity
| Material | Extruded aluminum frame. |
|---|---|
| Height | 49.2" (1250 mm) |
| Width, listed 580 mm rack | 22.8" (580 mm) |
| Depth | 2.2" (55 mm) |
| Weight | 24 lbs (10.7 kg) total system weight |
| Load rating | Tec Vanlife states loads up to 180 lbs. |
What’s in the box
Rack assembly
Gear rack in the selected width and configuration; lower door clamp.
Mounting hardware
Required mounting hardware, including hinge bolts and self-locking nuts, oval and square washers, frame assembly hardware and emblem mounting bolts.
Installation at a glance
One person can complete the installation, though two people make it easier; typical installation time is around one hour.
Maker states no drilling is required: the rack mounts to the factory hinge locations and uses the OEM Mercedes badge openings as a third anchor point; installation involves removing the factory Mercedes badge to access the mounting points, and no interior trim removal is required. All steps can be completed with standard hand tools and no modification to the vehicle body is required. The guide recommends professional installation. Inspect and tighten all hardware after the first 100 miles; inspect the rack every 600 miles or monthly, whichever occurs first.
Mounting sequence
- Assemble the frame, verify the hinge mounting holes and remove the original rear-door emblem.
- Fit the oval washer to the upper hinge and the square washer to the lower hinge, inserting the M10x35 bolts from inside to outside.
- Mount the frame on the hinges with M10 self-locking nuts. Align the rack emblem with the OEM emblem location and fasten it from the door side with two M6x16 bolts.
- Hook the lower support bracket onto the bottom edge of the right rear door and tighten its two center bolts.
- Check alignment, adjust if needed and fully tighten all bolts and nuts.
Lead Time
The shipping policy offers free shipping to the continental 48 states on orders over $150 unless product-specific or incremental weight/dimensional charges apply; contact Tec Vanlife for destinations outside the continental U.S.
This product
The product description states free shipping to the Lower 48 states; Portland Warehouse pickup is usually ready in 24 hours.
Warranty
Read Tec Vanlife warranty policy on WNDR BuiltReturns
Initiate authorized returns within 30 days of receipt for unused items with tags and original packaging; a 15% restocking fee plus original and return shipping applies, sale items and gift cards are non-returnable, and refunds before shipment incur a 6% transaction fee.
Read Tec Vanlife returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon