
Owl Outdoor
Sprinter Side Ladder
Indexed listing. WNDR Built doesn't sell this product; the button opens owlvans.com.
Roof access and gear mounting along the van side
The Owl Explorer Sprinter Side Ladder provides side access to roof racks, cargo boxes, solar panels and other rooftop equipment. Its aluminum ladder sits close to the van body; Owl describes that layout as reducing the risk of trail impact. Extended tread steps provide footing for the climb.
The ladder also serves as an exterior mounting surface for recovery boards, fuel containers, tools and other gear. Its modular treads and steps let it support more than roof access. Owl uses aluminum breakaway bolts at the lower attachment: the maker says these are designed to shear under a heavy lateral load, allowing the bottom of the ladder to break free and limit damage to the van.
Two-section assembly
The upper and lower ladder sections join with included mount bolts and captive nuts, as shown in Owl’s installation guide.
Roof-rail bracket
The installation guide describes an upper bracket with a central cut-out to accommodate different roof racks and twist lock rails that secure into the roof rail.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Owl Outdoor
- 2019–present Mercedes-Benz Sprinter vans (VS30 platform); does not fit low-roof Sprinters.
- Owl also lists Winnebago Revel, Storyteller Overland, Tiffin GH1, Thor Sanctuary & Tranquility, Jayco Terrain and Airstream.
Choose the flat mount bracket option
Owl offers the ladder with or without the add-on flat mount bracket.
No Bracket
- Ladder without the add-on flat mount bracket.
Add Flat Mount Bracket
- Required for roof racks with flat sides, such as the Backwoods Driftr or flat racks from other companies. Owl asks buyers who are unsure to contact its support team.
Drilling required
Owl’s installation guide calls for drilling through the lower pinch weld with a drill bit, installing the supplied breakaway bolts and nuts, and painting the holes and exposed metal to prevent corrosion.
Ladder position
On a 170" Sprinter, Owl states the ladder can mount in front of or behind the rear wheel.
Rack and side-step clearance
Owl lists compatibility with Flatline Roof Racks and asks buyers to confirm roof-rack or side-step compatibility before ordering. The ladder takes up 13" from the opening of the wheel well to the front of the ladder.
Upper attachment
The guide installs the upper bracket into the roof rail using twist lock rails.
Specs, parts & installation
Construction
| Ladder | Aluminum |
|---|---|
| Hardware | Owl lists all stainless steel or aluminum hardware. |
| Finish | Powder-coated black |
| Weight | 18 lbs. |
Load rating
| Working load figure | Owl’s Specifications section states an RVIA-certified load rating of 300 lbs. |
|---|
What’s in the box
Ladder and roof-rack mount
Side ladder and included steel roof-rack mount, as listed on the product page.
Assembly and mounting parts
The installation guide identifies included mount bolts, accessory-kit twist lock rails, and provided aluminum breakaway bolts and nuts.
Optional flat mount bracket
Included only when the Add Flat Mount Bracket option is selected.
Installation at a glance
The upper bracket attaches to the roof rail; the lower attachment requires drilling the pinch weld.
Assemble the two ladder sections, loosely position the upper bracket and ladder, adjust height and alignment, then secure the lower mount following Owl’s linked guide.
The guide calls for painting drilled holes and exposed metal, checking that all bolts are tight and removing loose items and tools from the roof.
Details from Owl’s installation guide
- Lay the upper and lower ladder sections on a soft surface and join them with the included mount bolts and captive nuts; tighten until snug.
- Position the twist lock rails parallel to the roof rail, slide them in and attach the upper bracket with washers and nuts. An existing roof rack may require maneuvering around it.
- Attach the ladder to the upper bracket with bolts and nuts. Adjust its height and alignment with the body seam before tightening.
- Thread the softer aluminum breakaway bolts carefully to avoid cross-threading.
Source notes
- Owl’s product-page Specifications section states “RVIA certified rated to 300 lbs. (tested up to 1000 lbs.)”; this listing uses the lower stated 300 lbs. rating.
- The same product page’s Breakaway Hardware section instead states a weight limit of 400 lbs.; its comparison table says “300Lbs (Tested Up To 1,200Lbs)”. The higher rating and differing test load remain unconfirmed.
- Owl’s product description says the installation requires no drilling; its linked side-ladder installation guide calls for drilling the lower pinch weld with a drill bit. This listing follows the guide.
- Owl’s product page states a limited lifetime warranty for the original owner; its comparison table instead lists “3yr - 36k OR 4yr - 40k if installed by Owl”.
- Owl’s product-page highlights say “Built in the USA”; the same page’s comparison table lists Owl’s Country of Origin as “Europe”. Origin is omitted from the specifications because these claims disagree.
- Owl’s product-page comparison table says “Assembly Fully Tig Welded”; its linked side-ladder installation guide instructs joining the top and bottom sections with included mount bolts. This listing follows the guide for two-section assembly.
Lead Time
This product
Owl’s product page states “Ships Within 1 Week.”
Warranty
This product
Owl’s product page states a limited lifetime warranty for the original owner.
Returns
Ordinary returns: 30 days from receipt or purchase, depending on the section; EU orders have a separate 14-day cooling-off right with customer-paid returns.
This product
Owl’s product-page Returns section accepts returns up to 30 days from the date of shipment.
What are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon