
Sandy Vans
SV Starboard Rack
Indexed listing. WNDR Built doesn't sell this product; the button opens sandyvans.com.
Accessory mounting on the passenger-side rear door
The SV Starboard Rack turns the passenger-side rear door into a mounting surface for cargo accessories. Its secondary anchor uses the factory holes behind the Mercedes emblem, alongside the hinge mounting points, so installation does not involve drilling through the door panel. Sandy Vans describes the attachment as reversible: the emblem can be reinstalled if the rack is removed.
The rack shares the Port Rack’s accessory pattern, letting the same SV accessories mount on either side. Sandy Vans lists the Boost Box Mini, its spare tire bracket and KUAT bike rack brackets as compatible accessories. Pairing the Starboard Rack with the driver-side Port Rack creates mounting space across both rear doors.
Aluminum construction
An aluminum rack with a black powder-coat finish.
Accessory mounting grid
The face combines a 3/8" carriage bolt pattern with a 1/4" threaded hole grid.
Bump stops
Large and small bump stops protect the van body from a loaded rack’s rearward swing.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Sandy Vans
- 2019+ Mercedes-Benz Sprinter VS30 & eSprinter · 144" / 170" / 170" EXT · High Roof · with passenger-side factory 180° rear door hinges.
- Drivetrains: 2WD & AWD (4x4).
Choose the rack or hinge bundle
Choose according to whether your van already has passenger-side 180° hinges.
Starboard Rack Only
- For vans already equipped with passenger-side 180° hinges.
Starboard Rack + 180 degree Rear Door Hinges (Passenger Side)
- Includes the passenger-side 180° hinges for a VS30 or eSprinter without that upgrade.
Hinge and vehicle exclusions
The product description and buying guide specify factory 180° rear door hinges and exclude 270° hinges and standard factory hinges. Ford Transit, Ram ProMaster and Sprinter NCV3 (2007–2018) are not compatible; NCV3 vans do not fit even with aftermarket 180-degree hinges.
Loaded door opening
With accessories mounted, the door will not open to a true 180°: cargo contacts the bump stops before full extension.
Load planning
Sandy Vans’ pre-order checklist says to keep the total accessory load under 200 lbs.
Door attachment
Passenger-side rear door; mounts to the two bolt holes built into the factory 180° hinges and the factory Mercedes emblem holes.
Sprinter-platform RVs and upfitter builds
Sandy Vans lists Winnebago Revel; Storyteller Overland (MODE, Beast Mode); Outside Van; Airstream Interstate & Atlas; Grech RV (Strada, Turismo, Terreno); Pleasure-Way Plateau; Leisure Travel Vans (Unity, Wonder); Coachmen Galleria; Midwest Automotive Designs; Jayco Terrain; Tiffin Wayfarer; and Thor Tranquility. Fitment depends on the exact model, year, suspension lift and body kit; confirm with Sandy Vans before ordering.
Specs, parts & installation
Rack construction
| Material | Aluminum |
|---|---|
| Finish | Powder Coat Black |
| Rack weight | 26 lbs |
| Load capacity | Sandy Vans states 200 lbs. |
Accessory attachment
| Carriage bolt pattern | 3/8" |
|---|---|
| Threaded hole grid | 1/4" |
What’s in the box
Rack and mounting parts
Starboard Rack (1); Extension Bracket (1); Hinge Spacers (2); Bump Stops — large (1) and small (1).
Undisputed listed hardware
1/4"-20 Nuts (4); 1/4" Washers (4); 3/8"-16 x 1" Bolts (4); 3/8"-16 Lock Nuts (4); 3/8" Washers (4).
Hinge bundle
The rack-and-hinges option also includes passenger-side 180° rear door hinges.
Installation at a glance
Sandy Vans states a 1–2 hour DIY install with basic tools; the manual uses two people to position and bolt the rack.
All mounting uses factory holes; no drilling through the door panel is required. Remove the bolted and adhered Mercedes emblem, attach the extension bracket, mount the rack with its hinge spacers, then install the bump stops.
The product page lists free professional installation at SV HQ in San Diego.
Tools listed by Sandy Vans
- Impact driver with 9/16" socket; 9/16" wrench; socket wrench; 7/16" wrench; 4mm Allen key; T20 Torx bit; needle-nose pliers; flat-head screwdriver; hammer or mini sledgehammer.
Emblem and extension bracket
- Remove the Torx bolts first, then pull the emblem straight back with steady, even force to release its adhesive; avoid twisting it to one side to prevent cracking the paint surround.
- Peel the bracket’s VHB backing, align its holes with the emblem holes, and press into place before tightening. Align before adhesive contact because repositioning is difficult.
Rack mounting and tightening sequence
- Have one person hold the rack while the other positions the hinge bolts. Insert the hinge spacers and 3/8" bolts from inside the door through the hinges; fit washers and nuts outside and leave loose.
- The small gap in the lower hinge spacer faces up.
- Attach and fully tighten the rack-to-extension-bracket hardware first, then tighten the extension bracket-to-door bolts, and finally the hinge bolts. The product page warns that tightening out of sequence can pull the rack off square.
Bump stop installation
- Remove the factory plastic stop pieces with a flat-head screwdriver.
- Hold cotter pins with needle-nose pliers and hammer them halfway into the factory hinge holes.
- Place and hammer the replacement bump stops over the pins: large at the bottom hinge, small at the upper hinge.
Source notes
- Sandy Vans’ Starboard Rack V2 manual, printed pages 4 and 6, calls for 1/4"-20 x 5/8" bolts for the extension bracket-to-door attachment.
- The same manual’s hardware list on printed page 2 and the product page’s box list name four 1/4"-20 x 7/8" button head screws and no 5/8" bolts; the manual’s page 6 uses 7/8" bolts for the rack-to-bracket attachment.
- This listing leaves the disputed bracket-fastener sizes and counts out of the parts list and installation summary.
- Sandy Vans’ description and buying guide require 180° hinges, but its FAQ says the rack installs without the 180° upgrade; this listing uses the narrower 180°-hinge fitment, and the FAQ’s broader claim remains unconfirmed.
Lead Time
Shipping typically takes 5–7 business days; free shipping on Sandy Vans-fulfilled products.
Read Sandy Vans lead time policy on WNDR BuiltWarranty
Direct-fulfilled products cover material or workmanship defects under normal use; partner products follow the manufacturer’s warranty.
Read Sandy Vans warranty policy on WNDR BuiltReturns
Direct-fulfilled items: 30 days from delivery, uninstalled and undamaged; 20% restocking fee and customer-paid return shipping.
Read Sandy Vans returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon