
Sandy Vans
SV Port Rack
Indexed listing. WNDR Built doesn't sell this product; the button opens sandyvans.com.
An accessory platform on the driver-side rear door
The SV Port Rack turns the driver-side rear door into a mounting face for storage and gear. It attaches at the hinge bolts and the existing license plate area, keeping new holes out of the door sheet metal. The aluminum face accepts SV exterior accessories, including the Boost Box storage system, spare tire bracket, and KUAT bike rack brackets.
The rack combines carriage-bolt mounting with a threaded hole grid so accessories can attach directly to the face. It can be paired with the passenger-side Starboard Rack for storage across both rear doors. The two racks share an attachment pattern, but the Port Rack has its own lower load limit because it anchors at the license plate zone.
Reversible door attachment
Sandy Vans describes the factory-hole attachment as removable without leaving new holes in the door panel.
Loaded-door stops
Large and small replacement bump stops keep mounted cargo from swinging back into the van body.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Sandy Vans
- 2019+ Mercedes-Benz Sprinter VS30 & eSprinter; 144" / 170" / 170" EXT; High Roof.
- 2WD & AWD (4x4); driver-side rear door (Port).
Choose the hinge package
Sandy Vans offers the rack by itself or with a driver-side 180-degree hinge pair.
Port Rack Only
- Sandy Vans says to choose the rack only if the van already has driver-side 180° hinges.
Port Rack + 180 degree Rear Door Hinges (Driver Side)
- Sandy Vans says to choose this option if the VS30 or eSprinter does not yet have driver-side 180° hinges; it adds the driver-side hinge pair.
Excluded vehicles
Not compatible with Ford Transit, Ram ProMaster, or Sprinter NCV3 (2007-2018), even with aftermarket 180-degree hinges.
Plastic cover drilling
Drill 1/4" holes in the plastic license plate cover; do not drill the factory door sheet metal.
Loaded door opening
With 180° hinges and accessories mounted, the cargo meets the bump stops before the door reaches a true 180° opening. Plan loading accordingly.
Load limit & climbing
Sandy Vans states a 100 lbs load capacity; its pre-order checklist calls for total accessory load under 100 lbs. The brand FAQ does not recommend climbing on the Port Rack.
Road-use restriction
The Port Rack installation manual states “NOT FOR ONROAD USE.”
Before use
Follow the supplied instructions and use only for the intended purpose and in compliance with applicable laws. Check mounting points and attachments before use, and regularly inspect for wear or damage.
Sprinter-platform RVs & upfitter builds
Sandy Vans lists these Sprinter-platform builds: Winnebago Revel; Storyteller Overland (MODE, Beast Mode); Outside Van; Airstream Interstate & Atlas; Grech RV (Strada, Turismo, Terreno); Pleasure-Way Plateau; Leisure Travel Vans (Unity, Wonder); Coachmen Galleria; Midwest Automotive Designs; Jayco Terrain; Tiffin Wayfarer; Thor Tranquility. Fitment depends on the exact model, year, suspension lift, and body kit; confirm with Sandy Vans before ordering. The build must use the factory Sprinter rear door and VS30-style hinges.
Installer requirement
Sandy Vans recommends professional installation; if you have no mechanical experience and are not thoroughly familiar with the installation procedures, its manual requires a professional installer or other qualified person.
Hinge fit
Fits the listed Sprinter configurations with driver-side factory 180° rear-door hinges. Sandy Vans offers a driver-side 180-degree hinge bundle for vans being converted before rack installation.
Specs, parts & installation
Rack & accessory mounting
| Material | Aluminum |
|---|---|
| Finish | Powder Coat Black |
| Rack weight | 26 lbs |
| Load capacity | Sandy Vans states 100 lbs |
| Attachment pattern | 3/8" carriage bolt pattern and 1/4" threaded hole grid |
| Door anchors | Hinges and factory license plate holes |
What’s in the box
Rack & door fittings
1 Port Rack, 1 license plate backer, 2 hinge spacers, 1 large bump stop, and 1 small bump stop.
License plate hardware
6 × 1/4"-20 x 7/8" button head screws, 6 × 1/4"-20 nuts, and 8 × 1/4" washers.
Hinge hardware
4 × 3/8"-16 x 1" bolts, 4 × 3/8"-16 lock nuts, and 4 × 3/8" washers.
Hinge bundle
The Port Rack + 180 degree Rear Door Hinges (Driver Side) option adds a driver-side 180° hinge pair.
Installation at a glance
Sandy Vans lists 1 to 2 hours; its manual calls for one person to hold the rack while another fits the hinge bolts.
Remove the license plate holder, clean the area, enlarge the plastic holder holes, and install the backer. Align all four bolts before the VHB tape touches the door; repositioning is difficult.
Tighten the backer hardware snugly without deforming the thin sheet metal. Attach the rack at the hinges and license plate backer, square it, then tighten. The product page also warns not to overtighten the hinge bolts because the thin metal behind the door can deform.
Install the large bump stop on the bottom hinge and the small stop on top; tap the cotter pins only halfway in so they can grip the stops.
Tools listed by Sandy Vans
- Impact driver with 9/16" socket
- 9/16" wrench
- 7/16" wrench
- 4mm Allen key
- T20 Torx bit
- Needle-nose pliers
- Flat-head screwdriver
- Hammer or mini sledgehammer
- Drill with 1/4" bit for the plastic license plate cover
Lead Time
Shipping typically takes 5–7 business days; free shipping on Sandy Vans-fulfilled products.
Read Sandy Vans lead time policy on WNDR BuiltWarranty
Direct-fulfilled products cover material or workmanship defects under normal use; partner products follow the manufacturer’s warranty.
Read Sandy Vans warranty policy on WNDR BuiltReturns
Direct-fulfilled items: 30 days from delivery, uninstalled and undamaged; 20% restocking fee and customer-paid return shipping.
Read Sandy Vans returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon