
Sandy Vans
The 'Stern' Sprinter Rear Step
Indexed listing. WNDR Built doesn't sell this product; the button opens sandyvans.com.
A hitch-mounted step for rear-door access
The Stern provides a place to step when entering or loading the rear of a Sprinter. Its brackets mount directly to the factory hitch receiver below the bumper, rather than attaching to a rear rack. Sandy Vans says the design leaves the hitch ball clear and does not need a rack.
The aluminum step has a textured black powder coat finish. Sandy Vans says its position below the bumper leaves the Mercedes-Benz rear proximity sensors unobstructed, without moving or contacting them.
Hitch-matched brackets
The mounting brackets are designed around the factory OEM hitch receiver geometry.
Aluminum step plates
The step plates are 3/16" aluminum with a textured black powder coat finish.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Sandy Vans
- Mercedes Sprinter 144", 170", and 170" EXT from 2007 onward, with factory OEM hitch.
Factory OEM hitch only
Aftermarket hitches are not compatible; the brackets require the factory receiver geometry and mounting pattern.
Drilling on 2007–2018 vans
Installation requires drilling 4 new holes in the factory hitch with a 1/4" bit. Sandy Vans states no cutting or welding is required for this installation.
2019 and newer
Sandy Vans lists a direct four-bolt mount for 2019 and newer Sprinters.
NVC3 bracket adjustment
Sandy Vans separately lists a minor bracket modification for "NVC3 Sprinter" and asks owners to contact its team before ordering for the required adjustment.
Sprinter-based RVs and upfitter builds
Sandy Vans lists Winnebago Revel; Storyteller Overland (MODE, Beast Mode); Outside Van; Airstream Interstate & Atlas; Grech RV (Strada, Turismo, Terreno); Pleasure-Way Plateau; Leisure Travel Vans (Unity, Wonder); Coachmen Galleria; Midwest Automotive Designs; Jayco Terrain; Tiffin Wayfarer; and Thor Tranquility. Fitment depends on the exact model, year, suspension lift and body kit; Sandy Vans requires checking the build with its team before ordering.
Specs, parts & installation
Step construction
| Material | Aluminum |
|---|---|
| Step plate | 3/16" aluminum |
| Finish | Textured black powder coat |
What’s in the box
Rear step
Assembled Stern Rear Step.
Mounting hardware
4x bolts, washers and lock nuts.
Installation at a glance
DIY installation; Sandy Vans lists 1 hour.
Watch the linked installation video before starting; Sandy Vans provides no printed manual for the Stern.
Use a wrench for the four-bolt installation; 2007–2018 vans also need a drill and 1/4" bit for the hitch holes described in Fitment.
Free professional installation is available at Sandy Vans' San Diego shop; call (619) 812-1903 to schedule.
2019 and newer mounting sequence
- Position the step under the factory hitch receiver and align the 4 bracket holes.
- Insert the hardware, hand-tighten, confirm the step is square, then fully tighten.
2007–2018 hole preparation
- Position the step and mark the holes through the bracket.
- Remove the step, drill on a stable surface, clean up the edges and reinstall.
Source notes
- Sandy Vans' product-page fitment and installation sections say 2019 and newer vans mount with 4 bolts and no drilling or modification; its Buying Guide also calls "NVC3" the newer generation and requires a minor bracket adjustment. This listing retains the bracket-adjustment requirement without assigning that label to model years.
- Sandy Vans' product-page specifications list an install time of "~1 hour" and its Install Time block says "1 hour"; its 2019 and Newer Sprinters instructions say "About 30 minutes." This listing uses the longer stated time.
Lead Time
Shipping typically takes 5–7 business days; free shipping on Sandy Vans-fulfilled products.
Read Sandy Vans lead time policy on WNDR BuiltWarranty
Direct-fulfilled products cover material or workmanship defects under normal use; partner products follow the manufacturer’s warranty.
Read Sandy Vans warranty policy on WNDR BuiltReturns
Direct-fulfilled items: 30 days from delivery, uninstalled and undamaged; 20% restocking fee and customer-paid return shipping.
Read Sandy Vans returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Owner reports
Quotes from owners and installers, with links to where they were posted. These are owner reports, not manufacturer-confirmed information, and may describe a different van or year than yours. Verify before you buy.
Great addition to our van so we can easily get on and off ladder and have a place to sit.
View originalSearches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon