
Flatline Van Co.
Sprinter Van Rear Ladder + Tire Carrier
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
A spare-tire mount and roof-access ladder in one
This combined carrier and ladder puts the spare tire and a fixed route to the roof on one rear door. Flatline says moving the spare out from underneath the van frees space for water or auxiliary fuel tanks. The ladder can also provide a second access point when loading bulky rooftop gear.
A stainless steel wheel mount carries the spare, while the third door attachment uses a dual-shock silicone dampener. Flatline says the dampener absorbs shock in both directions to manage the spare’s weight and bounce-back momentum as the door closes.
Aluminum frame
The carrier uses a powder-coated, 1.75 in round aluminum tube frame.
Climbing surfaces
The ladder has formed dimples in its rungs and machined aluminum foot pegs for the traction described by Flatline.
Wheel security
Corrosion-resistant studs, locking lug nuts and a lug-nut key mount the wheel; an adjustable lock rod accommodates different wheels.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
- 2019+ Sprinter 1500/2500 | 144"/170"/170" EXT | Low/High Roof
Choose the hinge package
Flatline offers the carrier with or without replacement hinges.
Sprinter Van Rear Ladder + Tire Carrier
- Carrier and ladder assembly.
Sprinter Van Rear Ladder + Tire Carrier + 180 Hinges
- Carrier and ladder assembly plus 180-degree hinges.
180-degree hinges required
The carrier requires 180-degree rear-door hinges. For a van with 270-degree hinges, choose the package with 180-degree hinges and replace the existing hinges; the guide notes that the factory rubber bump stop may need to transfer to the replacements.
3500 Dually restriction
Flatline says this product is not compatible with the 3500 Dually model without purchasing additional parts from Mercedes-Benz.
Parking-assist interference
Tires over 275/70R17 may occasionally trigger the parking-assist sensors in the rear light assembly.
Drilling required
The third mount requires drilling the door, with the outside hole enlarged to 5/8 in. With panel-style door trim, the guide additionally requires drilling through to the inner sheet metal and enlarging that inner hole to 7/8 in for the supplied panel plug.
Hitch lock not included
The adjustable lock rod accepts a traditional hitch lock; the guide specifies a 5/8 in diameter hitch-pin lock, such as CURT 23518, which is not included.
California Proposition 65
Flatline warns that this product can expose you to lead and lead compounds, DEHP and bisphenol A (BPA), which California identifies as causing cancer and birth defects or other reproductive harm.
Door attachment
Designed to mount to the driver-side rear door hinges.
Tire & spacer clearance
Flatline states that tire sizes up to 285 fit without alterations and that the 65 mm wheel studs accept up to a 15 mm spacer.
Installer requirement
Flatline recommends professional installation of aftermarket accessories; its guide requires a professional installer or other qualified person if you have no mechanical experience and are not thoroughly familiar with the installation procedures.
Before use
Flatline requires checking mounting points and attachments before use and regularly inspecting the product for wear or damage.
Specs, parts & installation
Frame & door mount
| Frame | 1.75 in round aluminum tube |
|---|---|
| Finish | Powder-coated aluminum |
| Third mount | Dual-shock silicone dampener |
| Foot pegs | Machined aluminum |
Wheel-mounting hardware
| Wheel mount | Stainless steel |
|---|---|
| Wheel studs | M14x1.5, 65 mm length, yellow zinc finish, grade 10.9; Flatline states they accept up to a 15 mm spacer |
| Lug nuts | Locking lug nuts and key |
| Lock rod | Adjustable for different wheels |
What’s in the box
Carrier & wheel mount
Combined ladder/tire-carrier frame, wheel bracket, two backer plates and adjustable lock rod.
Door-mounting parts
Upper and lower hinge backing plates, drill template, door mounting boss, bushing cap, tall and short bushings, sealing washer and snap-in panel plug.
Wheel & climbing hardware
Three wheel studs, three locking lug nuts, lug-nut key, two foot pegs and foot-peg wrench.
Installation supplies & selected hinges
Mounting hardware, multi-diameter drill bit and threadlocker; the +180 Hinges package adds 180-degree hinges.
Installation at a glance
Flatline’s guide estimates 1 hour and suggests additional help for some steps.
Remove the lower interior panel if applicable and clear the mounting area. Prepare the third-mount hole, assemble the wheel bracket and fit the hinge backing plates. With help, secure the carrier and third mount, check that the lower hinge stop engages the factory bump stop, and install the wheel and foot pegs.
Wheel & lock-rod setup
- Apply threadlocker to the short end of each wheel stud before threading it into the wheel bracket.
- Fit the wheel and tighten its locking lug nuts using the supplied key.
- The guide permits omitting the lock rod when using locking lug nuts.
Lead Time
Flatline’s FAQ lists in-stock dispatch in 1–2 business days and free lower-48 shipping; its Shipping policy lists flat-rate/economy options, with no-charge economy sometimes offered for longer lead times and typical LTL delivery of 7–21 business days.
Read Flatline Van Co. lead time policy on WNDR BuiltWarranty
Flatline’s Refund policy gives the original purchaser a one-year, non-transferable limited warranty covering product cost only, excluding installation, labor, freight and damage from racing, competition or trail use; alteration, modification or improper installation voids coverage.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Flatline’s Refund policy accepts returns with a pre-authorized RMA within 30 days of receipt for unused, resalable items in original packaging, with a 20% restocking fee and customer-paid return shipping unless Flatline erred; freight returns require coordination, clearance/garage-sale/final-sale items are excluded, and custom or made-to-order items may be non-returnable.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon