Adjustable roof mounting around fans and other accessories
This is a roof platform for the Ram ProMaster built from four side rails, six movable crossbars and a front wind fairing. The crossbars are 10-series, 80/20-compatible anodized aluminum extrusions with drop-in hardware slots. Flatline Van Co. says they can slide forward or backward to make room for MaxxAir fans, air conditioners and other roof accessories, and that solar panels, gear boxes and kayak carriers can be mounted to them.
The rack attaches to the roof’s factory anchor studs. Anchor stud brackets slide under the studs and clamp brackets sit over them; the side rails mount on carriage bolts through the anchor stud brackets, and rail connecting plates join the front and rear rails. The side rails are aluminum with a black powder coat and the hardware is stainless steel.
The fairing is offered two ways. The Normal Fairing is a plain aluminum wind fairing; the Fairing with 50" Light Bar Cutout is pre-modified, Flatline says, for most 50 in LED light bars, and it adds a light bar tray. Neither option includes a light bar.
Awning connection
The side rails accept a Fiamma F45S awning directly.
Side ladder pairing
Flatline designed this rack to fit its ProMaster Side Ladder.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
2014+ Promaster 1500/2500/3500 | 159" | High Roof
Choose the fairing
Both options fit the same listed van.
Normal Fairing
- Plain aluminum wind fairing
Fairing with 50" Light Bar Cutout
- Intended for a light bar or off-road lights
- Pre-modified for most 50" LED light bars
- Adds a light bar tray
- Light bar not included; Flatline recommends the Baja Designs ONX6 50" Arc LED Light Bar
California Proposition 65
Flatline warns that this product can expose you to lead and lead compounds, DEHP and bisphenol A (BPA), which California identifies as causing cancer and birth defects or other reproductive harm.
Mounting points
The rack mounts to the roof’s factory anchor studs with anchor stud brackets and clamp brackets. Flatline’s FAQ states its Low Pro racks require no drilling and mount to factory rails or holes.
Awning
Flatline says the Fiamma F45S 350 is its recommended awning and the F45S 300 also works; the awning mounts to the rack’s side rails. The Normal Fairing guide has an optional F45s-or-similar step using pre-placed mounting holes. The Light Bar Fairing guide’s awning step requires the included awning spacers. The awning is not included.
Companion parts
Flatline says the 159 in rack is engineered to fit the ProMaster Side Ladder, which is sold separately.
Installer requirement
Flatline’s installation guide says that anyone who has no mechanical experience and is not thoroughly familiar with the installation procedures must have the product installed by a professional installer or other qualified person. Flatline also states it always recommends a professional install for any aftermarket accessory.
Before use
Check mounting points and attachments before use, and regularly inspect the product for wear or damage, as required by Flatline’s guides.
Specs, parts & installation
Rack dimensions & construction
| Rack weight | 68 lb total (Flatline product details and dimensions image) |
|---|---|
| Side rails | Aluminum with black powder coat |
| Aluminum thickness | Formed 3/16 in aluminum, per Flatline’s comparison image |
| Crossbars | Six 10-series, 80/20-compatible anodized aluminum extrusions with drop-in hardware slots |
| Fairing | Aluminum |
| Hardware | Stainless steel |
Installation time
| Time | 1–2 hours per the installation guides (the page also says most installations take less than 90 minutes) |
|---|
What’s in the box
Rails & crossbars
Four side rails (front and rear, driver and passenger), two rail connecting plates and six crossbars.
Normal Fairing option
Aluminum front fairing with fairing brackets and trim gasket; eight anchor stud brackets and eight clamp brackets.
Light Bar Fairing option
Light bar fairing with tray, fairing side brackets, trim gasket and three awning spacers; six anchor stud brackets and six clamp brackets.
Hardware
Stainless steel hardware.
Installation at a glance
Flatline’s guides list 1–2 hours and suggest additional help for a few steps; the product page says most installations take less than 90 minutes.
The rack clamps to the factory roof anchor studs without drilling. Join the rails, position the crossbars and assemble the selected fairing.
Installation sequence and tools
- Flatline’s guides list 1–2 hours and suggest additional help for a few steps
- Slide the anchor stud brackets under the roof’s anchor studs and set the clamp brackets over them
- Place the side rails on the carriage bolts, join front and rear rails with the connecting plates and loosely tighten
- Position the crossbars, leaving one aside for the fairing
- Assemble the fairing brackets (Normal Fairing) or the light bar tray (Light Bar Fairing) onto a crossbar, attach the fairing and its brackets and the trim gasket, then lift the fairing assembly into place with help and tighten it to the brackets and side rails
- Tighten the crossbars starting with the front one, then align the rack front to back and tighten the side rails to the anchor stud brackets
- Optional awning step uses the pre-placed holes (with the included spacers on the Light Bar Fairing version)
- Tools listed: ratchet, 7/16 in and 1/2 in wrench or socket, 5/32 in and 3/16 in Allen wrenches.
Lead Time
Flatline Van Co. says in-stock items ship within 1–2 business days from its Arizona warehouse. Items sent by LTL freight typically take 7–21 business days to arrive. Its FAQ says shipping is free to the lower 48; its Shipping policy lists flat-rate shipping and possible free economy shipping with longer lead times.
Read Flatline Van Co. lead time policy on WNDR BuiltWarranty
One-year limited warranty from the original purchase date for the original purchaser, covering product cost only. It excludes installation, labor and freight, and damage from racing, competition or trail use, and is void for alteration, modification or improper installation.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Returns are accepted within 30 days of receipt with a pre-authorized RMA number, for unused items in resalable condition and original packaging. A 20% restocking fee applies, and the customer pays return shipping unless the return is due to Flatline’s error; LTL freight returns must be coordinated with Flatline. Clearance, garage-sale and final-sale items are not returnable, and custom or made-to-order items may also be non-returnable.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon