
White Top Adventures
Promaster Van 159 High Roof Strata Roof Rack
Indexed listing. WNDR Built doesn't sell this product; the button opens whitetopadventures.com.
Arrange the rack around your roof layout
White Top Adventures lists a Strata aluminum roof rack with six adjustable crossbars for the Ram Promaster, sized for the standard-length van. Six crossbars slide forward or back along the side rails; each has a channel on top for slide nuts. The maker states more crossbars can be added and any not needed can be left out.
Cross braces lock the front and rear rail sections together. Two front fairings included: a standard fairing and a light bar ready fairing. Bolts onto the factory roof mounts with no drilling.
Powder-coated aluminum
Aluminum with a matte black powder coat.
Companion equipment
Pairs with the WTA ProMaster Side Ladder and the 2-Pack Crossbars.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by White Top Adventures
- 2014+ Ram ProMaster · 159" · High roof · Standard cargo length.
Not the Extended
Designed for the standard cargo length, not the 159" Extended; the 159" Extended is a separate, longer product. Confirm your exact cargo length before ordering.
Light-bar mounting hardware
The guide requires M6 or M8 bolts matched to your light-bar brackets and says to follow the light-bar manufacturer's hardware and mounting requirements; it supplies crossbar T-nuts for the application.
Solar panels
Mount to the crossbars with the Solar Panel Mounting Brackets; the maker asks you to contact them with panel model and dimensions for a layout recommendation.
Side ladder (separate product)
The maker states the ProMaster side ladder mounts to factory C-channel roof rails, needs factory or like-factory low-profile C-channel rails on both sides, and can be installed independently of the rack.
Installer requirement
White Top recommends a professional installer. If you lack mechanical experience or are unfamiliar with the installation procedures, its guide requires a qualified professional or someone with the necessary expertise.
Before use
White Top's guide requires inspecting mounting points and attachments before use and regularly checking for wear or damage.
Specs, parts & installation
Platform construction
| Dimensions | 151" L × 59.7" crossbar width × 6.3" H |
|---|---|
| Weight | 65.8 lbs |
| Material | Aerospace-grade aluminum with matte black powder coat finish |
| Crossbars | 6 adjustable, with accessory channels |
| Coating | White Top Adventures states the powder coat resists rust, salt air, road spray and UV |
Maker load ratings
| Static load | White Top Adventures states 660 lbs ("Unless otherwise specified by the manufacturer") |
|---|---|
| Dynamic load | White Top Adventures states 220 lbs ("Unless otherwise specified by the manufacturer") |
What’s in the box
Rails and crossbars
Driver and passenger front and rear rails, six adjustable crossbars with accessory channels, and two X plates.
Mounts and fairings
Anchor bracket A ×12, anchor bracket B ×12, front brackets 1–5, standard front fairing, light-bar-ready fairing, fairing support and rubber edge guard.
Hardware
M8 and M6 T-blocks, M8-25/M6-18/M6-12 button head screws, M8-45 carriage bolts, M8/M6 flat washers and nylon locknuts, as listed in the guide.
Installation at a glance
Bolts onto factory roof mounts with no drilling. The maker describes it as a one-weekend install with hand tools.
Assemble anchor brackets, side rails, X plates, crossbars and either the standard or light-bar fairing using the matching guide.
Rack assembly sequence
- Install carriage bolts through anchor bracket A, slide the bracket onto the roof T-nut, then place anchor bracket B over it.
- Align rail slots over carriage bolts and finger-tighten washers and nylon locknuts so rails can still move.
- Align rail sections and bridge them with X plates. Position crossbars loosely; at this stage only X plates are fully tightened.
- For a standard fairing, assemble numbered front brackets and T-blocks, center the fairing on its crossbar, then attach the assembly to the rack. For a light bar, follow the alternate fairing steps.
- Check alignment and tighten crossbars, then anchor brackets.
Light-bar hardware requirement
- Use M6 or M8 bolts that match the height of the light-bar brackets; the guide supplies crossbar T-nuts for this application.
- Follow the light-bar manufacturer's recommended hardware and mounting requirements.
Lead Time
Orders typically ship within 1–2 days unless otherwise specified (shipping policy). White Top Adventures states it does not offer expedited shipping.
This product
White Top's product-page FAQ says in-stock orders ship the same or next business day and arrive in 3–7 business days. It lists UPS/FedEx.
Warranty
Read White Top Adventures warranty policy on WNDR BuiltReturns
White Top accepts returns within 30 days of delivery for items that have not been used, installed or assembled and are in the original packaging, with a 15% restocking fee and customer-paid return shipping; freight return fees also apply to large freight-shipped items.
Read White Top Adventures returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon