
2014-2027 Ram ProMaster Rear Spare Tire Rack for Prime Design Ladders (Ladder Not Included)
Indexed listing. WNDR Built doesn't sell this product; the button opens juggernautusa.com.
A spare tire mount built around your ladder
Juggernaut’s spare tire rack uses a Prime Design rear-door ladder as the foundation for carrying a spare wheel. It attaches to the ladder rather than directly to the van door, so it is for a build that already has, or will add, that separate ladder.
The rack’s top U-bolts wrap around the ladder’s side supports and rest on the selected rung. Nylock nuts secure the rack so it does not move independently of the ladder; lug nuts then hold the spare wheel to the rack.
Steel rack
Made in Colorado from 1/4" steel square tube and plate, with a black powder-coated finish for corrosion resistance.
Three mounting heights
The spare tire can sit at the bottom, middle or top of the ladder to suit different rear-door layouts.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Juggernaut USA
Ram ProMaster 1500, 2500 and 3500 · 2014–2027 · High Roof · FWD · 3.6L gas.
Choose the license plate relocator
Juggernaut says the relocator is optional and is only needed when the rack is mounted on the left door near the lower end.
Add License Plate Relocater
- Adds the license plate relocation kit.
- For a rack on the left door near the lower end.
Don't Add License Plate Relocater
- Rack without the license plate relocation kit.
Prime Design ladder required — not included
This rack bolts onto a Prime Design rear-door ladder that you must already own or purchase separately. It cannot mount directly to the van door.
Labeled rung cannot be used
The rack installation guide rules out the rung with the label because the ladder bends at that point.
Use and installer requirements
Juggernaut’s rack guide specifies off-road use only, no product modifications and use only on the stated vehicles. It says products should be installed by trained professionals and makes the customer responsible for safe, proper attachment.
Factory ladder does not work
Juggernaut states that the rack does not work with the factory Ram ProMaster ladder; it is designed around the Prime Design ladder only.
Relocator requires drilling and wiring
If the license plate relocation kit is purchased, its installation requires drilling the rightmost license plate light cover for a wire and tapping the existing license plate light wiring. The rack itself is described as no-drill.
Rear-door position
The Prime Design ladder can be mounted on either the left or right rear door.
Matching ladder
Prime Design AAL-8008 high-roof ladder; optional black anodized finish uses the -BLK suffix. Ladder sold separately.
AAL-8008 companion-ladder installation
For the separately purchased high-roof ProMaster AAL-8008 ladder, Prime Design requires the specified mounting position, no extra material between the door brackets and body unless supplied with the ladder, and only OEM-supplied parts; it discourages adding non-original components. Use hand tools, not power tools, to tighten fasteners. Relocation of the OEM backup camera may be required if the ladder is in its field of view.
AAL-8008 companion-ladder use
Prime Design requires the door to be securely closed and latched at top and bottom before ladder use. Check and retorque mounting fasteners after the first week, then monthly; inspect for corrosion and deterioration every six (6) months or more often as conditions require. Remove the ladder from service if mountings or hardware are missing, loose or damaged.
Specs, parts & installation
Rack construction
| Material | 1/4" steel square tube and plate |
|---|---|
| Finish | Powder-coated Black for corrosion resistance |
| Weight | 20.0 lb |
| Origin | Made in USA (Colorado) |
What’s in the box
Rack package
Spare tire rack, all mounting hardware and install instructions. The ladder is not included.
When the relocator option is selected
License plate relocation kit; the rack installation guide specifies included wire taps.
Installation at a glance
Juggernaut’s FAQ describes no-drill rack installation in about 15 minutes; its rack guide calls for trained professional installation.
Install the matching Prime Design ladder on the chosen rear door first, then attach the rack to the ladder and mount the spare wheel.
The optional license plate relocator adds drilling and electrical connections; follow the kit’s instructions.
Rack attachment sequence
- Install the Prime Design ladder following the instructions for that ladder.
- Choose the desired rack height, excluding the labeled rung where the ladder bends.
- Position the top U-bolts around the side supports, resting on top of the chosen rung.
- Tighten the nylock nuts until the rack is snug and does not move independently of the ladder.
- Install the spare tire with lug nuts.
Optional license plate relocation sequence
- If purchased, bolt the relocation kit to the ladder in the position shown in the guide.
- Open the rear driver-side door. Remove the push clips, panel cover and insulation; some builds have glued insulation that requires force to remove.
- Pry the rightmost license plate light cover out from the left side, then drill a hole large enough for the wire.
- Fish the wire through the hole and use the included wire taps on the existing license plate light wiring; some sheathing may need removal.
- Turn on the headlights to check the light, then seal up and reinstall the door panel.
Lead Time
Free UPS shipping to the lower 48; other destinations have calculated or quoted rates.
This product
The product page states 2–4 business days for UPS Ground delivery; the shipping policy lists 3–5 business days for lower-48 transit.
Warranty
Original-purchaser, non-transferable limited lifetime coverage for manufacturing defects, except product-specific periods; powder-coat coverage lasts 180 days.
This product
The linked rack installation guide disclaims express and implied warranties, while the product page advertises a limited lifetime manufacturer’s warranty.
Returns
Request within 90 days of receipt for unused, uninstalled goods; custom/made-to-order items excluded; customer pays return shipping except for seller-caused issues.
Read Juggernaut USA returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon